FreeBSD 6.0-RC1/i386: build port java/eclipse fails: Error occurred during initialization of VM

O. Hartmann ohartman at
Thu Oct 27 04:58:38 PDT 2005


I got this error during compiling 'eclipse' from ports:

===>  Building for eclipse-3.1.1
Error occurred during initialization of VM
Could not reserve enough space for object heap
Assuming RHEL CLASSPATH compatible.
Error occurred during initialization of VM
Could not reserve enough space for object heap
Assuming RHEL CLASSPATH compatible.
Error occurred during initialization of VM
Could not reserve enough space for object heap
*** Error code 1

Target machine is a most recent build-world built FreeBSD 6.0-RC1 with 
1GB RAM (Dell Optiplex G280, dmesg follows). HTT is enabled. Box uses 
the i915G graphics with 8MB video memory.

The above shown error sounds like the lack of main memory ... But for 
the case of another issue, please help.

Thanks, Oliver

-------------- next part --------------
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RC1 #80: Thu Oct 27 10:29:40 UTC 2005
    root at
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (2992.60-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf41  Stepping = 1
  AMD Features=0x100000<NX>
  Hyperthreading: 2 logical CPUs
real memory  = 1063804928 (1014 MB)
avail memory = 1031860224 (984 MB)
ACPI APIC Table: <DELL   GX280  >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 8
ioapic0 <Version 2.0> irqs 0-23 on motherboard
lapic0: Forcing LINT1 to edge trigger
netsmb_dev: loaded
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL GX280  > on motherboard
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0
pci_link1: <ACPI PCI Link LNKB> irq 10 on acpi0
pci_link2: <ACPI PCI Link LNKC> irq 10 on acpi0
pci_link3: <ACPI PCI Link LNKD> on acpi0
pci_link4: <ACPI PCI Link LNKE> irq 5 on acpi0
pci_link5: <ACPI PCI Link LNKF> irq 9 on acpi0
pci_link6: <ACPI PCI Link LNKG> irq 5 on acpi0
pci_link7: <ACPI PCI Link LNKH> irq 9 on acpi0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
p4tcc1: <CPU Frequency Thermal Control> on cpu1
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci0: <display, VGA> at device 2.0 (no driver attached)
pci0: <display> at device 2.1 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
bge0: <Broadcom BCM5751 Gigabit Ethernet, ASIC rev. 0x4001> mem 0xdfcf0000-0xdfcfffff irq 16 at device 0.0 on pci2
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge0: Ethernet address: 00:11:43:aa:71:72
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib3
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0xff80-0xff9f irq 21 at device 29.0 on pci0
usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0xff60-0xff7f irq 22 at device 29.1 on pci0
usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0xff40-0xff5f irq 18 at device 29.2 on pci0
usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0xff20-0xff3f irq 23 at device 29.3 on pci0
usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xffa80800-0xffa80bff irq 21 at device 29.7 on pci0
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <EHCI (generic) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
uhub5: vendor 0x0424 product 0xa700, class 9/0, rev 2.00/0.00, addr 2
uhub5: multiple transaction translators
uhub5: 4 ports with 4 removable, self powered
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcm0: <Intel ICH6 (82801FB)> port 0xec00-0xecff,0xe8c0-0xe8ff mem 0xdfebfe00-0xdfebffff,0xdfebfd00-0xdfebfdff irq 23 at device 30.2 on pci0
pcm0: <Analog Devices AD1981B AC97 Codec>
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf irq 16 at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <Intel ICH6 SATA150 controller> port 0xfe00-0xfe07,0xfe10-0xfe13,0xfe20-0xfe27,0xfe30-0xfe33,0xfea0-0xfeaf irq 20 at device 31.2 on pci0
atapci1: failed to enable memory mapping!
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
ichsmb0: <SMBus controller> port 0xe8a0-0xe8bf irq 17 at device 31.3 on pci0
ichsmb0: [GIANT-LOCKED]
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 1 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xca7ff,0xca800-0xcbfff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <8 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0 at vga0
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
ukbd0: DELL DELL USB Keyboard, rev 1.10/1.00, addr 3, iclass 3/1
kbd1 at ukbd0
uhid0: DELL DELL USB Keyboard, rev 1.10/1.00, addr 3, iclass 3/1
Timecounters tick every 1.333 msec
Fast IPsec: Initialized Security Association Processing.
acd0: DVDROM <HL-DT-STDVD-ROM GDR8163B/0D20> at ata0-master UDMA33
acd1: DVDR <NEC DVD+/-RW ND-3450A/102B> at ata0-slave UDMA33
ad4: 152587MB <Seagate ST3160023AS 8.12> at ata2-master SATA150
GEOM_LABEL: Label for provider acd1 is iso9660/CDROM.
lapic1: Forcing LINT1 to edge trigger
SMP: AP CPU #1 Launched!
cd0 at ata0 bus 0 target 0 lun 0
cd0: <HL-DT-ST DVD-ROM GDR8163B 0D20> Removable CD-ROM SCSI-0 device 
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd1 at ata0 bus 0 target 1 lun 0
cd1: <_NEC DVD+-RW ND-3450A 102B> Removable CD-ROM SCSI-0 device 
cd1: 33.000MB/s transfers
cd1: cd present [2295104 x 2048 byte records]
Trying to mount root from ufs:/dev/ad4s1a
bge0: link state changed to UP

More information about the freebsd-questions mailing list