fxp0 problem with 6Beta?

Wed Oct 5 14:18:40 PDT 2005

What do the outputs of "ifconfig fpx0", "arp -an", "tcpdump -i fxp0 -n" 
and "netstat -s" look like?

~BAS

On Wed, 5 Oct 2005, Bdrawyah wrote:

> I have a small LAN at home consisting of 192.168.0.5 (a single PIII) which runs 5.4 stable and 192.168.
> 0.7 (a dual PIII) which runs 6Beta4 connected with a Netgear router at 192.168.0.1.
> 192.168.0.7 has nothing on it, no firewall even, aside from 6Beta (with debugging turned off in the
> kernel) and cvsup.
>> From 192.168.0.7 I can find and login to 192.168.0.5 and external computers using ssh.
>> From 192.168.0.5 I can login to external computers using ssh but there is no sign of 192.168.0.7,
> pinging fails and the Netgear router can't see it.
> Any suggestions?
>
> Below is dmesg for 192.168.0.7
> Copyright (c) 1992-2005 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>        The Regents of the University of California. All rights reserved.
> FreeBSD 6.0-BETA4 #0: Sun Sep 11 16:48:29 BST 2005
>    root at box7.bruce.net:/usr/obj/usr/src/sys/BOX7BRUCE
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel Pentium III (731.02-MHz 686-class CPU)
>  Origin = "GenuineIntel"  Id = 0x683  Stepping = 3
>  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,
> FXSR,SSE>
> real memory  = 536870912 (512 MB)
> avail memory = 515887104 (491 MB)
> MPTable: <COMPAQ   Workstation >
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> cpu0 (BSP): APIC ID:  1
> cpu1 (AP): APIC ID:  0
> ioapic0: Changing APIC ID to 8
> ioapic0: Assuming intbase of 0
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> npx0: [FAST]
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> cpu0 on motherboard
> cpu1 on motherboard
> pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
> pci0: <PCI bus> on pcib0
> agp0: <Intel 82840 host to AGP bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0
> pcib1: <MPTable PCI-PCI bridge> at device 1.0 on pci0
> pci1: <PCI bus> on pcib1
> pcib2: <MPTable PCI-PCI bridge> at device 30.0 on pci0
> pci2: <PCI bus> on pcib2
> fxp0: <Intel 82559 Pro/100 Ethernet> port 0x5400-0x543f mem 0xfdc00000-0xfdc00fff,0xfdd00000-0xfd
> dfffff irq 18 at device 2.0 on pci2
> miibus0: <MII bus> on fxp0
> inphy0: <i82555 10/100 media interface> on miibus0
> inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> fxp0: Ethernet address: 00:02:a5:53:cb:3f
> ahc0: <Adaptec aic7892 Ultra160 SCSI adapter> port 0x5000-0x50ff mem 0xfde00000-0xfde00fff irq 19
> at device 7.0 on pci2
> ahc0: [GIANT-LOCKED]
> aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
> pci2: <display, VGA> at device 11.0 (no driver attached)
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel ICH UDMA66 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x6460-0x646f at
> device 31.1 on pci0
> ata0: <ATA channel 0> on atapci0
> ata1: <ATA channel 1> on atapci0
> uhci0: <Intel 82801AA (ICH) USB controller> port 0x6440-0x645f irq 19 at device 31.2 on pci0
> uhci0: [GIANT-LOCKED]
> usb0: <Intel 82801AA (ICH) USB controller> on uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> pci0: <multimedia, audio> at device 31.5 (no driver attached)
> pmtimer0 on isa0
> orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc97ff,0xe0000-0xeffff on isa0
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: [GIANT-LOCKED]
> psm0: model IntelliMouse, device ID 3
> fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
> fdc0: [FAST]
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
> ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/13 bytes threshold
> ppbus0: <Parallel port bus> on ppc0
> plip0: <PLIP network interface> on ppbus0
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 16550A
> sio1 at port 0x2f8-0x2ff irq 3 on isa0
> sio1: type 16550A
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> unknown: <PNP0401> can't assign resources (port)
> unknown: <PNP0501> can't assign resources (port)
> unknown: <PNP0501> can't assign resources (port)
> unknown: <PNP0700> can't assign resources (port)
> unknown: <PNP0c01> can't assign resources (memory)
> unknown: <PNP0303> can't assign resources (port)
> unknown: <PNP0f13> can't assign resources (irq)
> Timecounters tick every 1.000 msec
> acd0: CDROM <Compaq CRD-8402B/1.01> at ata0-master PIO4
> Waiting 5 seconds for SCSI devices to settle
> da0 at ahc0 bus 0 target 0 lun 0
> da0: <COMPAQ BD00975CC6 HPB6> Fixed Direct Access SCSI-3 device
> da0: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged Queueing Enabled
> da0: 8678MB (17773524 512 byte sectors: 255H 63S/T 1106C)
> SMP: AP CPU #1 Launched!
> Trying to mount root from ufs:/dev/da0s1a
>
>
> _______________________________________________
> freebsd-questions at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "freebsd-questions-unsubscribe at freebsd.org"
>

l8*
 	-lava

x.25 - minix - bitnet - plan9 - 110 bps - ASR 33 - base8