Quick Routing Question
Jason Morgan
jwm-freebsd at sentinelchicken.net
Tue Nov 1 07:48:16 PST 2005
On Tue, Nov 01, 2005 at 07:03:26AM -0800, Brian E. Conklin wrote:
> Do you have gateway_enable="YES" in your rc.conf?
Yes, I do. The FreeBSD works fine for routing to the outside, it's
between the subnets where I run into issues.
>
> Brian E. Conklin, MCP+I, MCSE
> Director of Information Services
> Mason General Hospital
> http://www.masongeneral.com
>
>
> -----Original Message-----
> From: owner-freebsd-questions at freebsd.org
> [mailto:owner-freebsd-questions at freebsd.org] On Behalf Of Jason Morgan
> Sent: Monday, October 31, 2005 9:42 PM
> To: FreeBSD Questions
> Subject: Quick Routing Question
>
>
> I am setting up a wireless subnet and, while the gateway (FreeBSD
> system) is communicating fine with the wireless router, my other subnet
> is not able to connect to the wireless router. Here is a diagram of my
> network, I think it's fairly typical.
>
>
> Wired Subnet (10.0.0.x)
> /
> /
> Internet <-- FreeBSD Machine
> \
> \
> Wireless Subnet (192.168.1.x)
>
>
> The 'wired' interface on the FreeBSD machine has an IP of 10.0.0.1, with
> the 'wireless' IP being 192.168.1.1. Now, the FreeBSD machine and the
> wireless router (192.168.1.2) communicate fine as does the wired subnet;
> however, I am not able to connect from a 10.0.0.x client to the wireless
> router. After running traceroute, etc, it seems that the FreeBSD machine
> is simply not routing the data from one subnet to the other. I've
> verified that it's not the firewall blocking packets. How do I get these
> subnets to communicate?
>
> Thanks,
> Jason
> _______________________________________________
> freebsd-questions at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "freebsd-questions-unsubscribe at freebsd.org"
> =====================================================================
> Mason General Hospital
> 901 Mt. View Drive
> PO Box 1668
> Shelton, WA 98584
> http://www.masongeneral.com
> (360) 426-1611
> =====================================================================
> This message is intended for the sole use of the individual and entity
> to whom it is addressed and may contain information that is privileged,
> confidential and exempt from disclosure under applicable law. If you
> are not the addressee nor authorized to receive for the addressee, you
> are hereby notified that you may not use, copy, disclose or distribute
> to anyone this message or any information contained in the message. If
> you have received this message in error, please immediately notify the
> sender and delete the message.
>
> Replying to this message constitutes consent to electronic monitoring
> of this message.
>
> Thank you.
>
More information about the freebsd-questions
mailing list