3Ware SATA RAID 8000 - Supported on 5.3-R?
Jonathan M. Slivko
freebsd-lists at slivko.org
Tue May 24 09:35:43 PDT 2005
OK, I added that. (it was actually already in /etc/defaults/rc.conf)
-- Jonathan
Franco Bruno Borghesi wrote:
> If it fails it's because there are certain inconsistencies that need
> user confirmation before they are corrected.
>
> You can add
> fsck_y_enable="YES"
> to your /etc/rc.conf so if default fsck fails, fsck -y is run. Check the
> fsck man page before doing so.
>
> Anyway, I don't understand why fsck is run on every reboot. If you just
> try a "reboot" or a "shutdown -r now" command in your console, will fsck
> run next time the system boots? It should'n happen. I don't understand
> why your file systems get uncleanly umounted.
>
> About freebsd 5.3, I've been using 3ware 7500-4LP (in raid 5) for the
> last 3 months, and I have not had such (nor any other) problems with twe
> driver.
>
> Hope it helps.
>
> 2005/5/24, Jonathan M. Slivko <freebsd-lists at slivko.org
> <mailto:freebsd-lists at slivko.org>>:
>
> Whether I run fsck manually or if I run it automagically at boot via rc
> (which happens every reboot), it fails. As I'm not at console, I can't
> tell whether the same things happen if the box is physically taken
> down.
> and fsck'd in single user mode. The better part of the question is,
> could this be the RAID card throwing out false errors due to not having
> complete support for 5.3-R?, as it says that it only supports the 4.x
> series.
>
> -- Jonathan
>
> Franco Bruno Borghesi wrote:
> > Your fstab is OK.
> >
> > I don't exactly understand the problem. When you boot fsck will run
> > automatically if the system did not correctly shut down. This is
> done
> > *before* disks are mounted rw, so there's no way you will see the
> "(NO
> > WRITE)" message.
> >
> > If system was not correctly shut down, fsck will run, and it
> *will* (and
> > should) slow down system boot process.
> >
> > So, is it the problem that fsck is running *every* time you boot?
> Or is
> > it that you get this "(NO WRITE)" message when you run it manually?
> >
> >
> > 2005/5/24, Jonathan M. Slivko < freebsd-lists at slivko.org
> <mailto:freebsd-lists at slivko.org>
> > <mailto:freebsd-lists at slivko.org <mailto:freebsd-lists at slivko.org>>>:
> >
> > root at bonjour(~)% cat /etc/fstab
> > #
> Device Mountpoint FStype Options Dump
> > Pass#
> > /dev/twed0s1b
> > none swap sw 0 0
> > /dev/twed0s1a / ufs
> > rw 1 1
> > /dev/twed0s1g /home ufs
> rw,userquota,groupquota
> > 2 2
> > /dev/twed0s1d /tmp ufs
> > rw 2 2
> > /dev/twed0s1e /usr ufs
> > rw 2 2
> > /dev/twed0s1f /var ufs
> > rw 2 2
> > /dev/acd0 /cdrom cd9660 ro,noauto
> > 0 0
> > none /proc
> > procfs rw 0 0
> > root at bonjour(~)%
> >
> >
> > Franco Bruno Borghesi wrote:
> > > Could you post your /etc/fstab?
> > >
> > > 2005/5/24, Jonathan M. Slivko < freebsd-lists at slivko.org
> <mailto:freebsd-lists at slivko.org>
> > <mailto:freebsd-lists at slivko.org
> <mailto:freebsd-lists at slivko.org>> >:
> > >
> > >>Yes, this is actually the autoboot fsck thats breaking,
> the one
> > that is
> > >>called from /etc/rc (via /etc/rc.d/). I can physically
> take the
> > box down
> > >>and do an offline fsck of it and that works fine, it's
> just when
> > it's in
> > >>multi-user mode thats the problem.
> > >>
> > >>-- Jonathan
> > >>
> > >>Franco Bruno Borghesi wrote:
> > >>
> > >>>For fsck to work (to actually correct any problems you
> may have),
> > >>>partitions should be umounted first. Are you sure you
> have umounted
> > >>>/dev/twedXXXX before running fsck?
> > >>>
> > >>>
> > >>>2005/5/24, Jonathan M. Slivko < freebsd-lists at slivko.org
> <mailto:freebsd-lists at slivko.org>
> > <mailto:freebsd-lists at slivko.org
> <mailto:freebsd-lists at slivko.org>>
> > >>><mailto: freebsd-lists at slivko.org
> <mailto:freebsd-lists at slivko.org>
> > <mailto:freebsd-lists at slivko.org
> <mailto:freebsd-lists at slivko.org>>>>:
> > >>>
> > >>>Hello,
> > >>>
> > >>>I have an interesting question, I have a Pentium 4 2.4Ghz
> (No HT
> > >>>Enabled),
> > >>>2x80GB SATA Hard Drives in RAID 1. The box boots, works, etc.
> > However,
> > >>>whenever you try and do an fsck -y, it says:
> > >>>
> > >>>root at bonjour (~)% fsck -y
> > >>>** /dev/twed0s1a (NO WRITE)
> > >>>** Last Mounted on /
> > >>>** Root file system
> > >>>** Phase 1 - Check Blocks and Sizes
> > >>>** Phase 2 - Check Pathnames
> > >>>** Phase 3 - Check Connectivity
> > >>>** Phase 4 - Check Reference Counts
> > >>>** Phase 5 - Check Cyl groups
> > >>>2821 files, 31805 used, 474682 free (322 frags, 59295
> blocks, 0.1%
> > >>>fragmentation)
> > >>>
> > >>>** /dev/twed0s1g (NO WRITE)
> > >>>** Last Mounted on /home
> > >>>** Phase 1 - Check Blocks and Sizes
> > >>>** Phase 2 - Check Pathnames
> > >>>** Phase 3 - Check Connectivity
> > >>>** Phase 4 - Check Reference Counts
> > >>>** Phase 5 - Check Cyl groups
> > >>>82057 files, 557735 used, 12912399 free (2343 frags, 1613757
> > blocks,
> > >>>0.0%
> > >>>fragmentation)
> > >>>
> > >>>** /dev/twed0s1d (NO WRITE)
> > >>>** Last Mounted on /tmp
> > >>>** Phase 1 - Check Blocks and Sizes
> > >>>** Phase 2 - Check Pathnames
> > >>>** Phase 3 - Check Connectivity
> > >>>** Phase 4 - Check Reference Counts
> > >>>** Phase 5 - Check Cyl groups
> > >>>30 files, 1787 used, 504700 free (20 frags, 63085 blocks,
> 0.0%
> > >>>fragmentation)
> > >>>
> > >>>** /dev/twed0s1e (NO WRITE)
> > >>>** Last Mounted on /usr
> > >>>** Phase 1 - Check Blocks and Sizes
> > >>>** Phase 2 - Check Pathnames
> > >>>** Phase 3 - Check Connectivity
> > >>>** Phase 4 - Check Reference Counts
> > >>>** Phase 5 - Check Cyl groups
> > >>>251160 files, 1318908 used, 13912410 free (73346 frags,
> 1729883
> > blocks,
> > >>>0.5% fragmentation)
> > >>>
> > >>>** /dev/twed0s1f (NO WRITE)
> > >>>** Last Mounted on /var
> > >>>** Phase 1 - Check Blocks and Sizes
> > >>>** Phase 2 - Check Pathnames
> > >>>** Phase 3 - Check Connectivity
> > >>>** Phase 4 - Check Reference Counts
> > >>>** Phase 5 - Check Cyl groups
> > >>>4424 files, 63321 used, 7042830 free (2462 frags, 880046
> blocks,
> > 0.0%
> > >>>fragmentation)
> > >>>
> > >>>The drives are Seagate SATA's (7200RPM) with a 3Ware SATA
> RAID
> > >>>Controller
> > >>>(8006-2LP) using the twe kernel driver. The drives themselves
> > allow data
> > >>>to be read to/written from them, but fsck will not work
> (and is
> > hanging
> > >>>things on boot).
> > >>>
> > >>>Anyone got any ideas? I looked at www.3ware.com
> <http://www.3ware.com>
> > < http://www.3ware.com> <http://www.3ware.com>
> > >>><http://www.3ware.com> earlier and it says that
> > >>>the 8006-2LP's support FreeBSD 4.x , but not 5.x - could
> this be
> > a result
> > >>>of that, seeing as otherwise the drives/RAID work fine
> (AFAIK,
> > it could
> > >>>not be and I'm just not sure how to test it).
> > >>>
> > >>>TIA,
> > >>>-- Jonathan
> > >>>_______________________________________________
> > >>> freebsd-questions at freebsd.org
> <mailto:freebsd-questions at freebsd.org>
> > <mailto:freebsd-questions at freebsd.org
> <mailto:freebsd-questions at freebsd.org>> <mailto:
> > freebsd-questions at freebsd.org
> <mailto:freebsd-questions at freebsd.org>
> <mailto:freebsd-questions at freebsd.org
> <mailto:freebsd-questions at freebsd.org>>>
> > >>>mailing list
> > >>> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> > >>>To unsubscribe, send any mail to "
> > >>>freebsd-questions-unsubscribe at freebsd.org
> <mailto:freebsd-questions-unsubscribe at freebsd.org>
> > <mailto:freebsd-questions-unsubscribe at freebsd.org
> <mailto:freebsd-questions-unsubscribe at freebsd.org>>
> > >>><mailto: freebsd-questions-unsubscribe at freebsd.org
> <mailto:freebsd-questions-unsubscribe at freebsd.org>
> > <mailto:freebsd-questions-unsubscribe at freebsd.org
> <mailto:freebsd-questions-unsubscribe at freebsd.org>>>"
> > >>>
> > >>>
> > >>
> > >>--
> > >>Jonathan M. Slivko - jonathan at slivko.org
> <mailto:jonathan at slivko.org> <mailto:jonathan at slivko.org
> <mailto:jonathan at slivko.org> >
> > >>"Linux: The Choice for the GNU Generation"
> > >>- http://www.linux.org/ -
> > >>
> > >>Don't fear the penguin.
> > >>.^.
> > >>/V\
> > >>/( )\
> > >>^^-^^
> > >>He's here to help.
> > >>
> > >
> > > _______________________________________________
> > > freebsd-questions at freebsd.org
> <mailto:freebsd-questions at freebsd.org>
> > <mailto:freebsd-questions at freebsd.org
> <mailto:freebsd-questions at freebsd.org>> mailing list
> > > http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> > > To unsubscribe, send any mail to
> > " freebsd-questions-unsubscribe at freebsd.org
> <mailto:freebsd-questions-unsubscribe at freebsd.org>
> > <mailto:freebsd-questions-unsubscribe at freebsd.org
> <mailto:freebsd-questions-unsubscribe at freebsd.org>>"
> >
> > --
> > Jonathan M. Slivko - jonathan at slivko.org
> <mailto:jonathan at slivko.org> <mailto:jonathan at slivko.org
> <mailto:jonathan at slivko.org>>
> > "Linux: The Choice for the GNU Generation"
> > - http://www.linux.org/ <http://www.linux.org/> -
> >
> > Don't fear the penguin.
> > .^.
> > /V\
> > /( )\
> > ^^-^^
> > He's here to help.
> >
> >
>
> --
> Jonathan M. Slivko - jonathan at slivko.org <mailto:jonathan at slivko.org>
> "Linux: The Choice for the GNU Generation"
> - http://www.linux.org/ -
>
> Don't fear the penguin.
> .^.
> /V\
> /( )\
> ^^-^^
> He's here to help.
>
>
--
Jonathan M. Slivko - jonathan at slivko.org
"Linux: The Choice for the GNU Generation"
- http://www.linux.org/ -
Don't fear the penguin.
.^.
/V\
/( )\
^^-^^
He's here to help.
More information about the freebsd-questions
mailing list