3Ware SATA RAID 8000 - Supported on 5.3-R?
Jonathan M. Slivko
freebsd-lists at slivko.org
Tue May 24 08:52:41 PDT 2005
You can see the file that my box is choking on in /etc/rc.d/fsck.
-- Jonathan
Franco Bruno Borghesi wrote:
> Your fstab is OK.
>
> I don't exactly understand the problem. When you boot fsck will run
> automatically if the system did not correctly shut down. This is done
> *before* disks are mounted rw, so there's no way you will see the "(NO
> WRITE)" message.
>
> If system was not correctly shut down, fsck will run, and it *will* (and
> should) slow down system boot process.
>
> So, is it the problem that fsck is running *every* time you boot? Or is it
> that you get this "(NO WRITE)" message when you run it manually?
>
>
> 2005/5/24, Jonathan M. Slivko <freebsd-lists at slivko.org>:
>
>>root at bonjour(~)% cat /etc/fstab
>># Device Mountpoint FStype Options Dump
>>Pass#
>>/dev/twed0s1b none swap sw 0 0
>>/dev/twed0s1a / ufs rw 1 1
>>/dev/twed0s1g /home ufs rw,userquota,groupquota
>>2 2
>>/dev/twed0s1d /tmp ufs rw 2 2
>>/dev/twed0s1e /usr ufs rw 2 2
>>/dev/twed0s1f /var ufs rw 2 2
>>/dev/acd0 /cdrom cd9660 ro,noauto 0 0
>>none /proc procfs rw 0 0
>>root at bonjour(~)%
>>
>>
>>Franco Bruno Borghesi wrote:
>>
>>>Could you post your /etc/fstab?
>>>
>>>2005/5/24, Jonathan M. Slivko <freebsd-lists at slivko.org>:
>>>
>>>
>>>>Yes, this is actually the autoboot fsck thats breaking, the one that is
>>>>called from /etc/rc (via /etc/rc.d/). I can physically take the box down
>>>>and do an offline fsck of it and that works fine, it's just when it's in
>>>>multi-user mode thats the problem.
>>>>
>>>>-- Jonathan
>>>>
>>>>Franco Bruno Borghesi wrote:
>>>>
>>>>
>>>>>For fsck to work (to actually correct any problems you may have),
>>>>>partitions should be umounted first. Are you sure you have umounted
>>>>>/dev/twedXXXX before running fsck?
>>>>>
>>>>>
>>>>>2005/5/24, Jonathan M. Slivko <freebsd-lists at slivko.org
>>>>><mailto:freebsd-lists at slivko.org>>:
>>>>>
>>>>>Hello,
>>>>>
>>>>>I have an interesting question, I have a Pentium 4 2.4Ghz (No HT
>>>>>Enabled),
>>>>>2x80GB SATA Hard Drives in RAID 1. The box boots, works, etc. However,
>>>>>whenever you try and do an fsck -y, it says:
>>>>>
>>>>>root at bonjour (~)% fsck -y
>>>>>** /dev/twed0s1a (NO WRITE)
>>>>>** Last Mounted on /
>>>>>** Root file system
>>>>>** Phase 1 - Check Blocks and Sizes
>>>>>** Phase 2 - Check Pathnames
>>>>>** Phase 3 - Check Connectivity
>>>>>** Phase 4 - Check Reference Counts
>>>>>** Phase 5 - Check Cyl groups
>>>>>2821 files, 31805 used, 474682 free (322 frags, 59295 blocks, 0.1%
>>>>>fragmentation)
>>>>>
>>>>>** /dev/twed0s1g (NO WRITE)
>>>>>** Last Mounted on /home
>>>>>** Phase 1 - Check Blocks and Sizes
>>>>>** Phase 2 - Check Pathnames
>>>>>** Phase 3 - Check Connectivity
>>>>>** Phase 4 - Check Reference Counts
>>>>>** Phase 5 - Check Cyl groups
>>>>>82057 files, 557735 used, 12912399 free (2343 frags, 1613757 blocks,
>>>>>0.0%
>>>>>fragmentation)
>>>>>
>>>>>** /dev/twed0s1d (NO WRITE)
>>>>>** Last Mounted on /tmp
>>>>>** Phase 1 - Check Blocks and Sizes
>>>>>** Phase 2 - Check Pathnames
>>>>>** Phase 3 - Check Connectivity
>>>>>** Phase 4 - Check Reference Counts
>>>>>** Phase 5 - Check Cyl groups
>>>>>30 files, 1787 used, 504700 free (20 frags, 63085 blocks, 0.0%
>>>>>fragmentation)
>>>>>
>>>>>** /dev/twed0s1e (NO WRITE)
>>>>>** Last Mounted on /usr
>>>>>** Phase 1 - Check Blocks and Sizes
>>>>>** Phase 2 - Check Pathnames
>>>>>** Phase 3 - Check Connectivity
>>>>>** Phase 4 - Check Reference Counts
>>>>>** Phase 5 - Check Cyl groups
>>>>>251160 files, 1318908 used, 13912410 free (73346 frags, 1729883 blocks,
>>>>>0.5% fragmentation)
>>>>>
>>>>>** /dev/twed0s1f (NO WRITE)
>>>>>** Last Mounted on /var
>>>>>** Phase 1 - Check Blocks and Sizes
>>>>>** Phase 2 - Check Pathnames
>>>>>** Phase 3 - Check Connectivity
>>>>>** Phase 4 - Check Reference Counts
>>>>>** Phase 5 - Check Cyl groups
>>>>>4424 files, 63321 used, 7042830 free (2462 frags, 880046 blocks, 0.0%
>>>>>fragmentation)
>>>>>
>>>>>The drives are Seagate SATA's (7200RPM) with a 3Ware SATA RAID
>>>>>Controller
>>>>>(8006-2LP) using the twe kernel driver. The drives themselves allow
>>
>>data
>>
>>>>>to be read to/written from them, but fsck will not work (and is hanging
>>>>>things on boot).
>>>>>
>>>>>Anyone got any ideas? I looked at www.3ware.com <http://www.3ware.com><
>>
>>http://www.3ware.com>
>>
>>>>><http://www.3ware.com> earlier and it says that
>>>>>the 8006-2LP's support FreeBSD 4.x, but not 5.x - could this be a
>>
>>result
>>
>>>>>of that, seeing as otherwise the drives/RAID work fine (AFAIK, it could
>>>>>not be and I'm just not sure how to test it).
>>>>>
>>>>>TIA,
>>>>>-- Jonathan
>>>>>_______________________________________________
>>>>>freebsd-questions at freebsd.org <mailto:freebsd-questions at freebsd.org>
>>>>>mailing list
>>>>>http://lists.freebsd.org/mailman/listinfo/freebsd-questions
>>>>>To unsubscribe, send any mail to "
>>>>>freebsd-questions-unsubscribe at freebsd.org
>>>>><mailto:freebsd-questions-unsubscribe at freebsd.org>"
>>>>>
>>>>>
>>>>
>>>>--
>>>>Jonathan M. Slivko - jonathan at slivko.org
>>>>"Linux: The Choice for the GNU Generation"
>>>>- http://www.linux.org/ -
>>>>
>>>>Don't fear the penguin.
>>>>.^.
>>>>/V\
>>>>/( )\
>>>>^^-^^
>>>>He's here to help.
>>>>
>>>
>>>_______________________________________________
>>>freebsd-questions at freebsd.org mailing list
>>>http://lists.freebsd.org/mailman/listinfo/freebsd-questions
>>>To unsubscribe, send any mail to "
>>
>>freebsd-questions-unsubscribe at freebsd.org"
>>
>>--
>>Jonathan M. Slivko - jonathan at slivko.org
>>"Linux: The Choice for the GNU Generation"
>>- http://www.linux.org/ -
>>
>>Don't fear the penguin.
>>.^.
>>/V\
>>/( )\
>>^^-^^
>>He's here to help.
>>
>
> _______________________________________________
> freebsd-questions at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "freebsd-questions-unsubscribe at freebsd.org"
--
Jonathan M. Slivko - jonathan at slivko.org
"Linux: The Choice for the GNU Generation"
- http://www.linux.org/ -
Don't fear the penguin.
.^.
/V\
/( )\
^^-^^
He's here to help.
More information about the freebsd-questions
mailing list