3Ware SATA RAID 8000 - Supported on 5.3-R?

[Franco Bruno Borghesi]

For fsck to work (to actually correct any problems you may have), partitions 
should be umounted first. Are you sure you have umounted /dev/twedXXXX 
before running fsck?


2005/5/24, Jonathan M. Slivko <freebsd-lists at slivko.org>:
> 
> Hello,
> 
> I have an interesting question, I have a Pentium 4 2.4Ghz (No HT Enabled),
> 2x80GB SATA Hard Drives in RAID 1. The box boots, works, etc. However,
> whenever you try and do an fsck -y, it says:
> 
> root at bonjour(~)% fsck -y
> ** /dev/twed0s1a (NO WRITE)
> ** Last Mounted on /
> ** Root file system
> ** Phase 1 - Check Blocks and Sizes
> ** Phase 2 - Check Pathnames
> ** Phase 3 - Check Connectivity
> ** Phase 4 - Check Reference Counts
> ** Phase 5 - Check Cyl groups
> 2821 files, 31805 used, 474682 free (322 frags, 59295 blocks, 0.1%
> fragmentation)
> 
> ** /dev/twed0s1g (NO WRITE)
> ** Last Mounted on /home
> ** Phase 1 - Check Blocks and Sizes
> ** Phase 2 - Check Pathnames
> ** Phase 3 - Check Connectivity
> ** Phase 4 - Check Reference Counts
> ** Phase 5 - Check Cyl groups
> 82057 files, 557735 used, 12912399 free (2343 frags, 1613757 blocks, 0.0%
> fragmentation)
> 
> ** /dev/twed0s1d (NO WRITE)
> ** Last Mounted on /tmp
> ** Phase 1 - Check Blocks and Sizes
> ** Phase 2 - Check Pathnames
> ** Phase 3 - Check Connectivity
> ** Phase 4 - Check Reference Counts
> ** Phase 5 - Check Cyl groups
> 30 files, 1787 used, 504700 free (20 frags, 63085 blocks, 0.0%fragmentation)
> 
> ** /dev/twed0s1e (NO WRITE)
> ** Last Mounted on /usr
> ** Phase 1 - Check Blocks and Sizes
> ** Phase 2 - Check Pathnames
> ** Phase 3 - Check Connectivity
> ** Phase 4 - Check Reference Counts
> ** Phase 5 - Check Cyl groups
> 251160 files, 1318908 used, 13912410 free (73346 frags, 1729883 blocks,
> 0.5% fragmentation)
> 
> ** /dev/twed0s1f (NO WRITE)
> ** Last Mounted on /var
> ** Phase 1 - Check Blocks and Sizes
> ** Phase 2 - Check Pathnames
> ** Phase 3 - Check Connectivity
> ** Phase 4 - Check Reference Counts
> ** Phase 5 - Check Cyl groups
> 4424 files, 63321 used, 7042830 free (2462 frags, 880046 blocks, 0.0%
> fragmentation)
> 
> The drives are Seagate SATA's (7200RPM) with a 3Ware SATA RAID Controller
> (8006-2LP) using the twe kernel driver. The drives themselves allow data
> to be read to/written from them, but fsck will not work (and is hanging
> things on boot).
> 
> Anyone got any ideas? I looked at www.3ware.com <http://www.3ware.com>earlier and it says that
> the 8006-2LP's support FreeBSD 4.x, but not 5.x - could this be a result
> of that, seeing as otherwise the drives/RAID work fine (AFAIK, it could
> not be and I'm just not sure how to test it).
> 
> TIA,
> -- Jonathan
> _______________________________________________
> freebsd-questions at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "
> freebsd-questions-unsubscribe at freebsd.org"
>