ATI RAGE Mobility
Andrew Heyn
aheyn at lifestylecomm.com
Tue Mar 29 12:07:11 PST 2005
I would like to state that at one point, I did get this to work.
This was also a long time ago, when the patches mentioned
in some of the proceeding links had to be done.. (which were and probably
still are XFree86 specific)
http://people.freebsd.org/~anholt/dri/news.html
http://am-productions.biz/docs/fujitsu-p2110.php leads to
http://dri.freedesktop.org/wiki/Building
I noticed that I had to make sure I rebuilt mach64.ko and some of the X
libraries regarding dri
if I was to upgrade the kernel.
Note this from the Wiki:
"The DRM is shipped with the kernel, so you shouldn't need to build it. If
you choose to, simply run "make && make install" from the drm/bsd directory.
"
This is contrary to the suggestion to install "ports/graphics/drm." The
building referred
to above is within the X tree.
The history to the mach64 dri support may be of interest:
http://people.freebsd.org/~anholt/dri/news.html (already gave this link)
You can always (if you are patient) contact anholt who is rather busy on
freenode.net in
#dri. Beware, I asked a question there, and fixed it myself before I got an
answer.
Hope this helps more than my other post.
It still sucked pretty bad once I got DRI working with my mach64, but...
It was better...
Thanks!
Andrew
-----Original Message-----
From: owner-freebsd-questions at freebsd.org
[mailto:owner-freebsd-questions at freebsd.org]On Behalf Of Mark Busby
Sent: Tuesday, March 29, 2005 11:23 AM
To: freebsd-questions at freebsd.org
Subject: re: ATI RAGE Mobility
On Monday 28 March 2005 20:25, Edwin Mons wrote:
> On Mon, 28 Mar 2005 20:20:50 +0200, Edwin Mons wrote:
> > I'm trying to enable DRI on my IBM ThinkPad A20m, which has an ATI
> > Rage Mobility P/M AGP 2x rev 100 GPU onboard. I succesfully
> > installed the mach64 DRM module, which shows the following lines in> >
my dmesg:
> >
> > drm0: <Rage Mobility P/M AGP 2X> port 0x2000-0x20ff mem
> > 0xf4200000-0xf4200fff,0xf5000000-0xf5ffffff irq 11 at device 0.0 on
> > pci1
> > info: [drm] AGP at 0xf8000000 64MB
> > info: [drm] Initialized mach64 1.0.0 20020904 on minor 0
> >
> > However, when I start X.org 6.8.2, it doesn't show anything about
> > DRM in the logfiles (attached). glxinfo reports it doesn't use
> > Direct Rendering as well.
> >
> > Attached is my xorg.conf, as well.
> >
> > My questions: 1) does anybody know if it is possible to have DRI on
> > this configuration at all, and 2) how does one get it to work?
from kernel LINT file
# DRM options:
# mgadrm: AGP Matrox G200, G400, G450, G550
# tdfxdrm: 3dfx Voodoo 3/4/5 and Banshee
# r128drm: ATI Rage 128
# radeondrm: ATI Radeon up to 9000/9100
# DRM_DEBUG: include debug printfs, very slow
#
# mga requires AGP in the kernel, and it is recommended
# for AGP r128 and radeon cards.
device mgadrm
device "r128drm"
device radeondrm
device tdfxdrm
options DRM_DEBUG
You may need to add the
"device mgadrm"
Hope it helps.
_______________________________________________
freebsd-questions at freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscribe at freebsd.org"
More information about the freebsd-questions
mailing list