Hardware problems after installing 5.4 pre-release

[Todd Shirk]

To add information on the usb mouse problem when I plug my usb mouse
in to the 2 usb 2.0 ports, I get the first error at the command line:

uhub1: device problem (SET_ADDR_FAILED), disabling port 2
uhub1: device problem (SET_ADDR_FAILED), disabling port 1

Like the sound, the usb mouse was working fine with FreeBSD 5.3, but
stop functioning after rebuild world to 5.4 pre-release.


On Mon, 28 Mar 2005 13:50:36 +0000, Todd Shirk <ts4short at gmail.com> wrote:
> You referred to kldstat.  I'm not sure what I'm looking for with that
> or what switch I may need to use.  I typed and received the following
> information:
> 
> # kldstat
> 
> Id Refs Address            Size     Name
>  1    8 0xffffffff80100000 7c36b8   kernel
>  2    1 0xffffffff808c4000 50c8     udbp.ko
>  3    2 0xffffffff808ca000 20ae0    netgraph.ko
>  4    1 0xffffffff808eb000 5f98     ugen.ko
>  5    1 0xffffffff808f1000 3918     ums.ko
> 
> I added the founding command and got the following results:
> 
> # kldload snd_driver
> # kldstat
> 
> Id Refs Address            Size     Name
>  1   59 0xffffffff80100000 7c36b8   kernel
>  2    1 0xffffffff808c4000 50c8     udbp.ko
>  3    2 0xffffffff808ca000 20ae0    netgraph.ko
>  4    1 0xffffffff808eb000 5f98     ugen.ko
>  5    1 0xffffffff808f1000 3918     ums.ko
>  6    1 0xffffffffa7842000 78d      snd_driver.ko
>  7    1 0xffffffffa7843000 1a7d     snd_ad1816.ko
>  8    1 0xffffffffa7845000 1b9d     snd_als4000.ko
>  9    1 0xffffffffa7847000 1fdd     snd_cmi.ko
> 10    1 0xffffffffa7849000 221d     snd_cs4281.ko
> 11    2 0xffffffffa784c000 3f3a     snd_csa.ko
> 12    1 0xffffffffa7850000 8add     snd_ds1.ko
> 13    1 0xffffffffa7859000 4375     snd_emu10k1.ko
> 14    1 0xffffffffa785e000 2c81     snd_es137x.ko
> 15    2 0xffffffffa7861000 240a     snd_ess.ko
> 16    4 0xffffffffa7864000 1a85     snd_sbc.ko
> 17    1 0xffffffffa7866000 181d     snd_fm801.ko
> 18    2 0xffffffffa7868000 6e8a     snd_mss.ko
> 19    1 0xffffffffa786f000 227d     snd_ich.ko
> 20    1 0xffffffffa7872000 3e5d     snd_maestro.ko
> 21    1 0xffffffffa7876000 5b3d     snd_maestro3.ko
> 22    1 0xffffffffa787c000 e41d     snd_neomagic.ko
> 23    1 0xffffffffa788b000 184d     snd_sb8.ko
> 24    1 0xffffffffa788d000 1bed     snd_sb16.ko
> 25    1 0xffffffffa788f000 251d     snd_solo.ko
> 26    1 0xffffffffa7892000 221d     snd_t4dwave.ko
> 27    1 0xffffffffa7895000 169d     snd_via82c686.ko
> 28    1 0xffffffffa7897000 225d     snd_vibes.ko
> 
> After doing that, I still do not have any sound.  I notice that
> snd_via8233 is not in the resulting list of loaded drivers in kldstat.
>  My assumption is that it didn't load through kldload since it's being
> loaded at the kernel level.  With the command of:
> 
> # cat /dev/sndstat
> 
> FreeBSD Audio Driver (newpcm)
> Installed devices:
> pcm0: <VIA VT8235> at io 0x1000 irq 10  (5p/1r/0v channels duplex default)
> 
> It would seem that my sound driver is loading.  The audio software
> seems to believe that there is a sound card to attach to.  Could there
> be a problem with the sound driver I'm using.  Would there be a reason
> why snd_via8233 works fine in 5.3 and not 5.4 pre-release?  Also,
> could the usb mouse problem be part of the same problem, reasoning
> being that there may be a global hardware issue and that it may be
> conflicts in device handling vs. a configuration issue?  Regardless,
> I'm happy and willing to try any thoughts.
> 
> I, also, tried to manually choose snd_via8233 with this result:
> 
> # kldload snd_via8233
> kldload: can't load snd_via8233: File exists
> 
> In the meantime, I'll try to trace down some helpful error messages
> from the usb mouse problem.
> 
> 
> On Thu, 24 Mar 2005 23:15:41 +0100, "albi at scii.nl" <albi at scii.nl> wrote:
> > On Thu, 24 Mar 2005 22:07:57 +0000
> > Todd Shirk <ts4short at gmail.com> wrote:
> > 
> > > (MYKERNEL is the GENERIC plus the lines needed for loading the sound
> > > system and the via8233 sound driver for my sound card)
> > >   device       sound
> > >   device       "snd_via8233"
> > > (with mergemaster I chose "i" for each file, indicating to use
> > > tempory)
> > > 
> > > I booted into the new environment and started KDE3.4.  I noticed that
> > > I had no sound and no usb mouse functionality.  I did the following:
> > > 
> > > # cat /dev/sndstat
> > > FreeBSD Audio Driver (newpcm)
> > > Installed devices:
> > > pcm0: <VIA VT8235> at io 0x1000 irq 10  (5p/1r/0v channels duplex
> > > default)
> > 
> > did you check with kldstat which module for sounds was loaded ?
> > and tried : kldload snd_driver ?
> > 
> > see e.g. :
> > http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/sound-setup.html
> > 
> >
>