Xorg mouse problems

[Alexander Chamandy]

Hi all,

I've got a PS/2 Labtech optical mouse with and Xorg 6.8.2 running on
FreeBSD 5.4PR with an AMD Athlon and a GeForce 2 MX and I'm having
some strange problems with Xorg and moused.  This all worked fine
under NetBSD (1.6.x and 2.0) with the wsmouse driver, but strangely,
now when I use Xorg and/or moused on FreeBSD the mouse skips on
verticle or horizontal movement all the way across the screen.  I've
tried changing the resolution, disabling ACPI, using different
protocols and nothing has resolved the problem.  Has anyone
experienced this before and if so, how have they resolved it?


dmesg included: 

Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.4-PRERELEASE #0: Sun Mar 27 08:12:11 EST 2005
    root at ambrosia.envescent.net:/usr/src/sys/i386/compile/ambrosia
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) Processor (1343.06-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x644  Stepping = 4
  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
  AMD Features=0xc0440000<RSVD,AMIE,DSP,3DNow!>
real memory  = 805224448 (767 MB)
avail memory = 782417920 (746 MB)
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 9 Entries> on motherboard
$PIR: BIOS IRQ 15 for 0.4.INTC is not valid for link 0x3
pci0: <PCI bus> on pcib0
$PIR: ROUTE_INTERRUPT failed.
agp0: <VIA 82C8363 (Apollo KT133x/KM133) host to PCI bridge> mem
0xe4000000-0xe7ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686B UDMA100 controller> port
0xd800-0xd80f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 4.1 on
pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 7 at device
4.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 7 at device
4.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 4.4 (no driver attached)
pci0: <multimedia, audio> at device 4.5 (no driver attached)
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xa400-0xa47f mem
0xd5800000-0xd580007f irq 7 at device 13.0 on pci0
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:04:76:e3:6d:42
atapci1: <Promise PDC20265 UDMA100 controller> port
0x8800-0x883f,0x9000-0x9003,0x9400-0x9407,0x9800-0x9803,0xa000-0xa007
mem 0xd5000000-0xd501ffff irq 10 at device 17.0 on pci0
ata2: channel #0 on atapci1
ata3: channel #1 on atapci1
orm0: <ISA Option ROMs> at iomem
0xd0000-0xd07ff,0xcc000-0xce7ff,0xc0000-0xcb7ff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNPb002> can't assign resources (irq)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0303> can't assign resources (port)
Timecounter "TSC" frequency 1343055484 Hz quality 800
Timecounters tick every 10.000 msec
acd0: CDROM <CRD-8320B/1.24> at ata0-master PIO4
ad4: 76319MB <WDC WD800JB-00CRA1/17.07W17> [155061/16/63] at ata2-master UDMA100
Mounting root from ufs:/dev/ad4s1a



-- 
Best wishes,

Alexander G. Chamandy
Webmaster
www.bsdfreak.org
Your Source For BSD News!