Weird USB KVM Woes in 5.4-PRE
Remington
TastyNachos at charter.net
Sat Mar 19 15:15:19 PST 2005
FreeBSD baby 5.4-PRERELEASE FreeBSD 5.4-PRERELEASE #7: Sat Mar 12
14:22:16 PST 2005 remi at baby:/usr/obj/usr/src/sys/AMD64 amd64
What I am doing is using a KVM with my AMD64 laptop. The KVM cables are
PS/2 so I have Radio Shack PS/2-2-TO-USB cable adapters to connect both
my mouse and keyboard. On boot both the keyboard and mouse are not
operational. If I disconnect the cable going to the mouse my keyboard
works. If I do this vice-versa(disconnect keyboard) nothing works(i.e.
my mouse still doesnt work).
The KVM does work with my windows partition of my laptop so I am lead to
believe it is an issue with USB implementation of BSD not my KVM. I have
attached my dmesg -v for diagnostic.
-------------------------------
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-PRERELEASE #7: Sat Mar 12 14:22:16 PST 2005
remi at baby:/usr/obj/usr/src/sys/AMD64
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff806a6000.
Preloaded elf obj module "/boot/kernel/acpi_perf.ko" at
0xffffffff806a6240.
Preloaded elf obj module "/boot/kernel/cpufreq.ko" at
0xffffffff806a6770.
Preloaded elf obj module "/boot/kernel/powernow.ko" at
0xffffffff806a6c98.
Calibrating clock(s) ... i8254 clock: 1193199 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 800032866 Hz
CPU: AMD Athlon(tm) 64 Processor 3200+ (800.03-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0xf4a Stepping = 10
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow>
L1 2MB data TLB: 8 entries, fully associative
L1 2MB instruction TLB: 8 entries, fully associative
L1 4KB data TLB: 32 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way
associative
L2 2MB unified TLB: 0 entries, disabled/not present
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 16-way
associative
real memory = 536805376 (511 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x00000000007a4000 - 0x000000001f0bffff, 512868352 bytes (125212 pages)
avail memory = 509042688 (485 MB)
ACPI APIC Table: <INSYDE APIC_000>
APIC: CPU 0 has ACPI ID 0
MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 1
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: low
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
ioapic0 <Version 0.3> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00040010 LDR: 0x01000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x00010000 therm: 0x00000000 err: 0x00010000 pcm: 0x00010000
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
mem: <memory>
io: <I/O>
acpi0: <INSYDE RSDT_000> on motherboard
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80010014
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=31881106)
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 17 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 17 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 17 func 0
acpi0: Power Button (fixed)
acpi_ec0: <Embedded Controller: GPE 0x5> port 0x66,0x62 on acpi0
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU (3 Cx states)> on acpi0
k8_powernow0: <Powernow K8> on cpu0
k8_powernow0: nstates: 4 fsb: 200
k8_powernow0: 0 2000000kHz FID 0c (10.0) VID 02 (1500mV)
k8_powernow0: 1 1800000kHz FID 0a ( 9.0) VID 06 (1400mV)
k8_powernow0: 2 1600000kHz FID 08 ( 8.0) VID 0a (1300mV)
k8_powernow0: 3 800000kHz FID 00 ( 4.0) VID 12 (1100mV)
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_ec0: info: new max delay is 30 us
acpi_ec0: info: new max delay is 40 us
acpi_cmbat0: <Control Method Battery> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff iomem
0xfffc0000-0xffffffff on acpi0
ACPI PCI link initial configuration:
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base b0000000, size 27, enabled
found-> vendor=0x1106, dev=0x3188, revid=0x01
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords)
lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0xb188, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x2230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0a (2500 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base 00000000, size 12, enabled
found-> vendor=0x1524, dev=0x1411, revid=0x01
bus=0, slot=9, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns)
intpin=a, irq=255
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000e000, size 7, enabled
pcib0: matched entry for 0.9.INTB
pcib0: slot 9 INTB hardwired to IRQ 18
found-> vendor=0x1524, dev=0x0510, revid=0x00
bus=0, slot=9, func=1
class=05-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0210, cachelnsz=4 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=18
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base f0000000, size 11, enabled
map[14]: type 4, range 32, base 0000e080, size 7, enabled
pcib0: matched entry for 0.11.INTA
pcib0: slot 11 INTA hardwired to IRQ 18
found-> vendor=0x1106, dev=0x3044, revid=0x80
bus=0, slot=11, func=0
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x0210, cachelnsz=4 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x00 (0 ns), maxlat=0x20 (8000 ns)
intpin=a, irq=18
powerspec 2 supports D0 D2 D3 current D0
map[20]: type 4, range 32, base 00001200, size 5, enabled
pcib0: matched entry for 0.16.INTA
pcib0: slot 16 INTA hardwired to IRQ 21
found-> vendor=0x1106, dev=0x3038, revid=0x80
bus=0, slot=16, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x16 (660 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=21
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 00001300, size 5, enabled
pcib0: matched entry for 0.16.INTB
pcib0: slot 16 INTB hardwired to IRQ 21
found-> vendor=0x1106, dev=0x3038, revid=0x80
bus=0, slot=16, func=1
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x16 (660 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=21
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 0000fce0, size 5, port disabled
found-> vendor=0x1106, dev=0x3038, revid=0x80
bus=0, slot=16, func=2
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x16 (660 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base f0000800, size 8, enabled
pcib0: matched entry for 0.16.INTD
pcib0: slot 16 INTD hardwired to IRQ 21
found-> vendor=0x1106, dev=0x3104, revid=0x82
bus=0, slot=16, func=3
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=21
powerspec 2 supports D0 D1 D2 D3 current D0
found-> vendor=0x1106, dev=0x3177, revid=0x00
bus=0, slot=17, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 00001100, size 4, enabled
found-> vendor=0x1106, dev=0x0571, revid=0x06
bus=0, slot=17, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000e100, size 8, enabled
pcib0: matched entry for 0.17.INTC
pcib0: slot 17 INTC hardwired to IRQ 22
found-> vendor=0x1106, dev=0x3059, revid=0x50
bus=0, slot=17, func=5
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=22
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000e200, size 8, enabled
pcib0: matched entry for 0.17.INTC
pcib0: slot 17 INTC hardwired to IRQ 22
found-> vendor=0x1106, dev=0x3068, revid=0x80
bus=0, slot=17, func=6
class=07-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=22
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000e300, size 8, enabled
map[14]: type 1, range 32, base f0000900, size 8, enabled
pcib0: matched entry for 0.18.INTA
pcib0: slot 18 INTA hardwired to IRQ 23
found-> vendor=0x1106, dev=0x3065, revid=0x74
bus=0, slot=18, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x0210, cachelnsz=4 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x03 (750 ns), maxlat=0x08 (2000 ns)
intpin=a, irq=23
powerspec 2 supports D0 D1 D2 D3 current D0
found-> vendor=0x1022, dev=0x1100, revid=0x00
bus=0, slot=24, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1101, revid=0x00
bus=0, slot=24, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1102, revid=0x00
bus=0, slot=24, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1103, revid=0x00
bus=0, slot=24, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
agp0: <VIA 8385 host to PCI bridge> mem 0xb0000000-0xb7ffffff at device
0.0 on pci0
AMD64: 1 Misc. Control unit(s) found.
agp0: Reserved 0x8000000 bytes for rid 0x10 type 3 at 0xb0000000
agp0: allocating GATT for aperture of size 128M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xc000-0xdfff
pcib1: memory decode 0xe0000000-0xefffffff
pcib1: prefetched decode 0xa0000000-0xafffffff
pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.AGPB -
AE_NOT_FOUND
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 3, range 32, base a8000000, size 27, enabled
pcib1: device (null) requested decoded memory range
0xa8000000-0xafffffff
map[14]: type 4, range 32, base 0000c100, size 8, enabled
pcib1: device (null) requested decoded I/O range 0xc100-0xc1ff
map[18]: type 1, range 32, base e0010000, size 16, enabled
pcib1: device (null) requested decoded memory range
0xe0010000-0xe001ffff
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
pcib1: slot 0 INTA is routed to irq 16
found-> vendor=0x1002, dev=0x4e50, revid=0x00
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=4 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
powerspec 2 supports D0 D1 D2 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
cbb0: <ENE CB710 PCI-CardBus Bridge> at device 9.0 on pci0
cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80000000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib0: matched entry for 0.9.INTA
pcib0: slot 9 INTA hardwired to IRQ 17
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
0x00: 0x14111524 0x02100007 0x06070001 0x00824008
0x10: 0x80000000 0x020000a0 0x40030200 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x07400111
0x40: 0x83551071 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x0040d021 0x00000000 0x00000000 0x010c1202
0x90: 0x604482c0 0x00000000 0x00000000 0x00000000
0xa0: 0xfe010001 0x00c00000 0x00000010 0x00000fef
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00001000 0x00800080 0x12080400 0x20000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
pci0: <memory, flash> at device 9.1 (no driver attached)
pci0: <serial bus, FireWire> at device 11.0 (no driver attached)
uhci0: <VIA 83C572 USB controller> port 0x1200-0x121f irq 21 at device
16.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1200
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ukbd0: Composite USB PS2 Converter USB to PS2 Adaptor v1.12, rev
1.10/0.01, addr 2, iclass 3/1
kbd: new array size 4
kbd1 at ukbd0
kbd1: ukbd0, generic (0), config:0x0, flags:0x1d0000
ums0: Composite USB PS2 Converter USB to PS2 Adaptor v1.12, rev
1.10/0.01, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
uhci1: <VIA 83C572 USB controller> port 0x1300-0x131f irq 21 at device
16.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1300
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ukbd1: Composite USB PS2 Converter USB to PS2 Adaptor v1.12, rev
1.10/0.01, addr 2, iclass 3/1
kbd2 at ukbd1
kbd2: ukbd1, generic (0), config:0x0, flags:0x1d0000
ums1: Composite USB PS2 Converter USB to PS2 Adaptor v1.12, rev
1.10/0.01, addr 2, iclass 3/1
ums1: 3 buttons and Z dir.
uhci2: <VIA 83C572 USB controller> port 0xfce0-0xfcff at device 16.2 on
pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xfce0
pcib0: matched entry for 0.16.INTC
pcib0: slot 16 INTC hardwired to IRQ 21
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 16.3 (no driver attached)
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8235 UDMA133 controller> port
0x1100-0x110f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 17.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1100
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1-master: stat=0x10 err=0x01 lsb=0x14 msb=0xeb
ata1-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=10 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: [MPSAFE]
pcm0: <VIA VT8235> port 0xe100-0xe1ff irq 22 at device 17.5 on pci0
pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xe100
pcm0: [GIANT-LOCKED]
pcm0: <C-Media Electronics CMI9739 AC97 Codec (id = 0x434d4961)>
pcm0: Codec features 5 bit master volume, no 3D Stereo Enhancement
pcm0: Primary codec extended features double rate PCM, reserved 1,
center DAC, surround DAC, LFE DAC, reserved 4
pcm0: sndbuf_setmap 972000, 1000; 0xffffff0000972000 -> 972000
pcm0: sndbuf_setmap 1ec50000, 1000; 0xffffff001ec50000 -> 1ec50000
pcm0: sndbuf_setmap 97a000, 1000; 0xffffff000097a000 -> 97a000
pcm0: sndbuf_setmap 978000, 1000; 0xffffff0000978000 -> 978000
pcm0: sndbuf_setmap 9b5000, 1000; 0xffffff00009b5000 -> 9b5000
pcm0: sndbuf_setmap 992000, 1000; 0xffffff0000992000 -> 992000
pci0: <simple comms> at device 17.6 (no driver attached)
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xe300-0xe3ff mem
0xf0000900-0xf00009ff irq 23 at device 18.0 on pci0
vr0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xe300
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x004063, model 0x0032, rev. 8
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: bpf attached
vr0: Ethernet address: 00:40:d0:5a:8b:bb
vr0: [MPSAFE]
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz0: _CRT value is absurd, ignored (300.0C)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0067
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
unknown: not probed (disabled)
sio0: irq maps: 0xc201 0xc209 0xc201 0xc201
sio0: <Generic IRDA-compatible device> port 0x2f8-0x2ff irq 3 drq 0
flags 0x10 on acpi0
sio0: type 16550A
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
atkbdc: atkbdc0 already exists; skipping it
sio: sio0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xea000-0xeefff,0xc0000-0xcffff on isa0
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1 failed to probe at port 0x2f8 irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xffffffff800b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 6f 4f 4f 93 55 83
97 1f 00 4f 0d 0e 00 00 07 80 8f 82 8f 28 1f 8f
98 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 6f 4f 4f 93 55 83
97 1f 00 4f 0d 0e 00 00 07 80 8f 82 8f 28 1f 8f
98 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 800032866 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
pflog0: bpf attached
pfsync0: bpf attached
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
acpi_cmbat0: battery initialization start
acpi_cmbat0: battery initialization done, tried 1 times
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: setting PIO4 on VIA 8235 chip
ata0-master: setting UDMA100 on VIA 8235 chip
ad0: <TOSHIBA MK6026GAX/PA202G> ATA-6 disk at ata0-master
ad0: 57231MB (117210240 sectors), 116280 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
GEOM: new disk ad0
ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata1-master: setting PIO4 on VIA 8235 chip
ata1-master: setting UDMA33 on VIA 8235 chip
acd0: <QSI CD-RW/DVD-ROM SBW242B/UX51> CDRW drive at ata1 as master
acd0: read 689KB/s (4126KB/s) write 4126KB/s (4126KB/s), 2048KB buffer,
UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes: CDR, CDRW, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
[0] f:00 typ:7 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:24579387
[1] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:24579450
l:92630790
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 12584646144 end 12584678399
GEOM: Configure ad0s2, start 12584678400 length 47426964480 end
60011642879
[0] f:63 typ:114 s(CHS):368/111/45 e(CHS):371/101/51 s:218129509
l:1701990410
[1] f:73 typ:116 s(CHS):67/115/32 e(CHS):299/114/44 s:729050177
l:543974724
[2] f:74 typ:101 s(CHS):114/111/32 e(CHS):353/115/52 s:168653938 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:-1602027520 l:51635
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
GEOM: Configure ad0s2a, start 0 length 314572800 end 314572799
GEOM: Configure ad0s2b, start 314572800 length 1073741824 end 1388314623
GEOM: Configure ad0s2c, start 0 length 47426964480 end 47426964479
GEOM: Configure ad0s2d, start 1388314624 length 314572800 end 1702887423
GEOM: Configure ad0s2e, start 1702887424 length 104857600 end 1807745023
GEOM: Configure ad0s2f, start 1807745024 length 524288000 end 2332033023
GEOM: Configure ad0s2g, start 2332033024 length 45094931456 end
47426964479
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
(probe0:ata0:0:0:0): error 22
(probe0:ata0:0:0:0): Unretryable Error
(probe1:ata0:0:1:0): error 22
(probe1:ata0:0:1:0): Unretryable Error
(probe3:ata1:0:1:0): error 22
(probe3:ata1:0:1:0): Unretryable Error
(probe0:ata0:0:0:0): error 22
(probe0:ata0:0:0:0): Unretryable Error
(probe1:ata0:0:1:0): error 22
(probe1:ata0:0:1:0): Unretryable Error
(probe3:ata1:0:1:0): error 22
(probe3:ata1:0:1:0): Unretryable Error
(probe2:ata1:0:0:0): error 22
(probe2:ata1:0:0:0): Unretryable Error
(probe2:ata1:0:0:0): error 6
(probe2:ata1:0:0:0): Unretryable Error
(probe2:ata1:0:0:0): error 22
(probe2:ata1:0:0:0): Unretryable Error
pass0 at ata1 bus 0 target 0 lun 0
pass0: <QSI CDRW/DVD SBW242B UX51> Removable CD-ROM SCSI-0 device
pass0: 33.000MB/s transfers
GEOM: new disk cd0
ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0
ioapic0: routing intpin 2 (ISA IRQ 0) to cluster 0
ioapic0: routing intpin 3 (ISA IRQ 3) to cluster 0
ioapic0: routing intpin 8 (ISA IRQ 8) to cluster 0
ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0
ioapic0: routing intpin 12 (ISA IRQ 12) to cluster 0
ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0
ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0
ioapic0: routing intpin 17 (PCI IRQ 17) to cluster 0
ioapic0: routing intpin 21 (PCI IRQ 21) to cluster 0
ioapic0: routing intpin 22 (PCI IRQ 22) to cluster 0
ioapic0: routing intpin 23 (PCI IRQ 23) to cluster 0
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
cd0 at ata1 bus 0 target 0 lun 0
cd0: <QSI CDRW/DVD SBW242B UX51> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
Mounting root from ufs:/dev/ad0s2a
start_init: trying /sbin/init
More information about the freebsd-questions
mailing list