make index failed: french/mozilla-flp failed
Tim Cleaver
timcleaver at hotmail.com
Thu Mar 17 17:31:47 PST 2005
Hello all,
After a cvsup yesterday I have run into the following problem when running
either make index or portsdb -uU:
Generating INDEX-5 - please wait..fr-mozilla-flp-1.7.5_1:
"/usr/ports/www/mozilla-devel-gtk2" non-existent -- dependency list
incomplete
===> french/mozilla-flp failed
*** Error code 1
********************************************************************
Before reporting this error, verify that you are running a supported
version of FreeBSD (see http://www.FreeBSD.org/ports/) and that you
have a complete and up-to-date ports collection. (INDEX builds are
not supported with partial or out-of-date ports collections -- in
particular, if you are using cvsup, you must cvsup the "ports-all"
collection, and have no "refuse" files.) If that is the case, then
report the failure to ports at FreeBSD.org together with relevant
details of your ports configuration (including FreeBSD version,
your architecture, your environment, and your /etc/make.conf
settings, especially compiler flags and WITH/WITHOUT settings).
Note: the latest pre-generated version of INDEX may be fetched
automatically with "make fetchindex".
********************************************************************
*** Error code 1
Stop in /usr/ports.
*** Error code 1
Stop in /usr/ports.
I have already googled for this problem and came up with the thread:
http://lists.freebsd.org/pipermail/freebsd-questions/2004-July/051719.html
but all the solutions offered there are no help. I have run cvsup multiple
times and have no refuse files. I also do not have mozilla-devel-gtk
installed (I have no mozilla anything installed the reason why is another
story though).
the output of uname -a is:
FreeBSD pc078650.sci.griffith.edu.au 5.3-RELEASE-p1 FreeBSD 5.3-RELEASE-p1
#7: Tue Nov 23 11:49:52 EST 2004
tim at pc078650.sci.griffith.edu.au:/usr/obj/usr/src/sys/KERNCONF i386
the output of find / -iname refuse is:
/usr/share/examples/cvsup/refuse
/usr/src/share/examples/cvsup/refuse
the output of pkg_info | grep moz is: (empty)
the output of find / -iname moz | less is: (empty)
my make.conf file is (essentially a copy of the example):
# $FreeBSD: src/share/examples/etc/make.conf,v 1.229.2.5 2004/10/09 18:38:57
dougb Exp $
#
# NOTE: Please would any committer updating this file also update the
# make.conf(5) manual page, if necessary, which is located in
# src/share/man/man5/make.conf.5.
#
# /etc/make.conf, if present, will be read by make (see
# /usr/share/mk/sys.mk). It allows you to override macro definitions
# to make without changing your source tree, or anything the source
# tree installs.
#
# This file must be in valid Makefile syntax.
#
# There are additional things you can put into /etc/make.conf.
# You have to find those in the Makefiles and documentation of
# the source tree.
#
# Note, that you should not set MAKEOBJDIRPREFIX or MAKEOBJDIR
# from make.conf (or as command line variables to make).
# Both variables are environment variables for make and must be used as:
#
# env MAKEOBJDIRPREFIX=/big/directory make
#
#
# The CPUTYPE variable controls which processor should be targeted for
# generated code. This controls processor-specific optimizations in
# certain code (currently only OpenSSL) as well as modifying the value
# of CFLAGS to contain the appropriate optimization directive to gcc.
# The automatic setting of CFLAGS may be overridden using the
# NO_CPU_CFLAGS variable below.
# Currently the following CPU types are recognized:
# Intel x86 architecture:
# (AMD CPUs) athlon-mp athlon-xp athlon-4 athlon-tbird athlon k6-3
# k6-2 k6 k5
# (Intel CPUs) p4 p3 p2 i686 i586/mmx i586 i486 i386
# Alpha/AXP architecture: ev67 ev6 pca56 ev56 ev5 ev45 ev4
# Intel ia64 architecture: itanium
#
# (?= allows to buildworld for a different CPUTYPE.)
#
#CPUTYPE?=p4
#NO_CPU_CFLAGS= true # Don't add -march=<cpu> to CFLAGS automatically
#NO_CPU_COPTFLAGS=true # Don't add -march=<cpu> to COPTFLAGS automatically
#
# CFLAGS controls the compiler settings used when compiling C code.
# Note that optimization settings other than -O and -O2 are not recommended
# or supported for compiling the world or the kernel - please revert any
# nonstandard optimization settings to "-O" before submitting bug reports
# without patches to the developers.
# Note also that at this time the -O2 setting is known to expose bugs in
# libalias(3), and possibly other parts of the system.
#
#CFLAGS= -O -pipe
#
# CXXFLAGS controls the compiler settings used when compiling C++ code.
# Note that CXXFLAGS is initially set to the value of CFLAGS. If you wish
# to add to CXXFLAGS value, "+=" must be used rather than "=". Using "="
# alone will remove the often needed contents of CFLAGS from CXXFLAGS.
#
#CXXFLAGS+= -fmemoize-lookups -fsave-memoized
#
# MAKE_SHELL controls the shell used internally by make(1) to process the
# command scripts in makefiles. Three shells are supported, sh, ksh, and
# csh. Using sh is most common, and advised. Using ksh *may* work, but is
# not guaranteed to. Using csh is absurd. The default is to use sh.
#
#MAKE_SHELL?=sh
#
# BDECFLAGS are a set of gcc warning settings that Bruce Evans has suggested
# for use in developing FreeBSD and testing changes. They can be used by
# putting "CFLAGS+=${BDECFLAGS}" in /etc/make.conf. -Wconversion is not
# included here due to compiler bugs, e.g., mkdir()'s mode_t argument.
#
#BDECFLAGS= -W -Wall -ansi -pedantic -Wbad-function-cast -Wcast-align \
# -Wcast-qual -Wchar-subscripts -Winline \
# -Wmissing-prototypes -Wnested-externs -Wpointer-arith \
# -Wredundant-decls -Wshadow -Wstrict-prototypes -Wwrite-strings
#
# To compile just the kernel with special optimizations, you should use
# this instead of CFLAGS (which is not applicable to kernel builds anyway).
# There is very little to gain by using higher optimization levels, and
doing
# so can cause problems.
#
#COPTFLAGS= -O -pipe
#
# To build the system compiler such that it forces high optimization levels
to
# a lower one. GCC -O2+ is known to trigger known optimizer bugs at various
# times -- this is worse on the Alpha platform. The value assigned here
will
# be the highest optimization value used.
#WANT_FORCE_OPTIMIZATION_DOWNGRADE=1
#
# Compare before install
#INSTALL=install -C
#
# Mtree will follow symlinks
#MTREE_FOLLOWS_SYMLINKS= -L
#
# To build ppp with normal permissions
#PPP_NOSUID= true
#
# To enable installing ssh(1) with the setuid bit turned on
#ENABLE_SUID_SSH= true
#
# To enable installing newgrp(1) with the setuid bit turned on.
# Without the setuid bit, newgrp cannot change users' groups.
#ENABLE_SUID_NEWGRP= true
#
# To avoid building various parts of the base system:
#NO_ACPI= true # do not build acpiconf(8) and related programs
#NO_BOOT= true # do not build boot blocks and loader
#NO_CVS= true # do not build CVS
#NO_CXX= true # do not build C++ and friends
#NO_BLUETOOTH= true # do not build Bluetooth related stuff
#NO_DYNAMICROOT=true # do not link /bin and /sbin dynamically
#NO_FORTRAN= true # do not build g77 and related libraries
#NO_GDB= true # do not build GDB
#NO_I4B= true # do not build isdn4bsd package
#NO_IPFILTER= true # do not build IP Filter package
#NO_PF= true # do not build PF firewall package
#NO_AUTHPF= true # do not build and install authpf (setuid/gid)
#NO_KERBEROS= true # do not build and install Kerberos 5 (KTH Heimdal)
#NO_LPR= true # do not build lpr and related programs
#NO_MAILWRAPPER=true # do not build the mailwrapper(8) MTA selector
#NO_MODULES= true # do not build modules with the kernel
#NO_OBJC= true # do not build Objective C support
#NO_OPENSSH= true # do not build OpenSSH
#NO_OPENSSL= true # do not build OpenSSL (implies NO_KERBEROS/NO_OPENSSH)
#NO_SENDMAIL= true # do not build sendmail and related programs
#NO_SHAREDOCS= true # do not build the 4.4BSD legacy docs
#NO_TCSH= true # do not build and install /bin/csh (which is tcsh)
#NO_TOOLCHAIN= true # do not build programs for program development
#NO_USB= true # do not build usbd(8) and related programs
#NO_VINUM= true # do not build Vinum utilities
#NOATM= true # do not build ATM related programs and libraries
#NOCRYPT= true # do not build any crypto code
#NOGAMES= true # do not build games (games/ subdir)
#NOINET6= true # do not build IPv6 related programs and libraries
#NOINFO= true # do not make or install info files
#NOLIBC_R= true # do not build libc_r (re-entrant version of libc)
#NOLIBPTHREAD= true # do not build libpthread (M:N threading library)
#NOLIBTHR= true # do not build libthr (1:1 threading library)
#NOMAN= true # do not build manual pages
#NOPROFILE= true # Avoid compiling profiled libraries
#NOSHARE= true # do not go into the share subdir
#
# Variables to control whether parts of the base BIND are built.
# Defining NO_BIND makes all of the following BIND variables obsolete.
# Please see the more detailed descriptions in make.conf(5).
#NO_BIND= true # Do not build any part of BIND
#NO_BIND_DNSSEC= true # Do not build dnssec-keygen, dnssec-signzone
#NO_BIND_ETC= true # Do not install files to /etc/namedb
#NO_BIND_LIBS_LWRES= true # Do not install the lwres library
#NO_BIND_MTREE= true # Do not run mtree to create chroot directories
#NO_BIND_NAMED= true # Do not build named, rndc, lwresd, etc.
#NO_BIND_UTILS= true # Do not build dig, host, nslookup, nsupdate
#WITH_BIND_LIBS= true # Install the BIND libs and include files
#
# To build sys/modules when building the world (our old way of doing things)
#MODULES_WITH_WORLD=true # do not build modules when building kernel
#
# The list of modules to build instead of all of them.
#MODULES_OVERRIDE= linux ipfw
#
# The following controls building optional IDEA code in libcrypto and
# certain ports. Patents are involved - you must not use this unless
# you either have a license or fall within patent 'fair use'
# provisions.
#
# *** It is YOUR RESPONSIBILITY to determine if you can use this! ***
#
# IDEA is patented in the USA and many European countries - thought to
# be OK to use for any non-commercial use. This is optional.
#MAKE_IDEA= YES # IDEA (128 bit symmetric encryption)
#
# If you do not want unformatted manual pages to be compressed
# when they are installed:
#
#NOMANCOMPRESS= true
#
#
# If you want the "compat" shared libraries installed as part of your normal
# builds, uncomment these:
#
#COMPAT1X= yes
#COMPAT20= yes
#COMPAT21= yes
#COMPAT22= yes
#COMPAT3X= yes
#COMPAT4X= yes
#
#
# Default format for system documentation, depends on your printer.
# Set this to "ascii" for simple printers or screen
#
#PRINTERDEVICE= ps
#
#
# How long to wait for a console keypress before booting the default kernel.
# This value is approximately in milliseconds. Keypresses are accepted by
the
# BIOS before booting from disk, making it possible to give custom boot
# parameters even when this is set to 0.
#
#BOOTWAIT=0
#BOOTWAIT=30000
#
# By default, the system will always use the keyboard/video card as system
# console. However, the boot blocks may be dynamically configured to use a
# serial port in addition to or instead of the keyboard/video console.
#
# By default we use COM1 as our serial console port *if* we're going to use
# a serial port as our console at all. Alter as necessary.
#
# COM1: = 0x3F8, COM2: = 0x2F8, COM3: = 0x3E8, COM4: = 0x2E8
#
#BOOT_COMCONSOLE_PORT= 0x3F8
#
# The default serial console speed is 9600. Set the speed to a larger value
# for better interactive response.
#
#BOOT_COMCONSOLE_SPEED= 115200
#
# By default the 'pxeboot' loader retrieves the kernel via NFS. Defining
# this and recompiling /usr/src/sys/boot will cause it to retrieve the
kernel
# via TFTP. This allows pxeboot to load a custom BOOTP diskless kernel yet
# still mount the server's '/' (i.e. rather than load the server's kernel).
#
#LOADER_TFTP_SUPPORT= YES
#
#
# Kerberos 5 su (k5su)
# If you want to use the k5su utility, define this to have it installed
# set-user-ID.
#ENABLE_SUID_K5SU= yes
#
#
# CVSup update flags. Edit SUPFILE settings to reflect whichever
distribution
# file(s) you use on your site (see /usr/share/examples/cvsup/README for
more
# information on CVSup and these files). To use, do "make update" in
/usr/src.
#
#SUP_UPDATE= yes
#
#SUP= /usr/local/bin/cvsup
#SUPFLAGS= -g -L 2
#SUPHOST= cvsup.uk.FreeBSD.org
#SUPFILE= /usr/share/examples/cvsup/standard-supfile
#PORTSSUPFILE= /usr/share/examples/cvsup/ports-supfile
#DOCSUPFILE= /usr/share/examples/cvsup/doc-supfile
#
# top(1) uses a hash table for the user names. The size of this hash
# can be tuned to match the number of local users. The table size should
# be a prime number approximately twice as large as the number of lines in
# /etc/passwd. The default number is 20011.
#
#TOP_TABLE_SIZE= 101
#
# Documentation
#
# The list of languages and encodings to build and install
#
#DOC_LANG= en_US.ISO8859-1 ru_RU.KOI8-R
#
#
# sendmail
#
# The following sets the default m4 configuration file to use at
# install time. Use with caution as a make install will overwrite
# any existing /etc/mail/sendmail.cf. Note that SENDMAIL_CF is now
# deprecated. The value should be a fully qualified path name.
#
#SENDMAIL_MC=/etc/mail/myconfig.mc
#
# The following sets the default m4 configuration file for mail
# submission to use at install time. Use with caution as a make
# install will overwrite any existing /etc/mail/submit.cf. The
# value should be a fully qualified path name.
#
#SENDMAIL_SUBMIT_MC=/etc/mail/mysubmit.mc
#
# If you need to build additional .cf files during a make buildworld,
# include the full paths to the .mc files in SENDMAIL_ADDITIONAL_MC.
#
#SENDMAIL_ADDITIONAL_MC=/etc/mail/foo.mc /etc/mail/bar.mc
#
# The following overrides the default location for the m4 configuration
# files used to build a .cf file from a .mc file.
#
#SENDMAIL_CF_DIR=/usr/local/share/sendmail/cf
#
# Setting the following variable modifies the flags passed to m4 when
# building a .cf file from a .mc file. It can be used to enable
# features disabled by default.
#
#SENDMAIL_M4_FLAGS=
#
# Setting the following variables modifies the build environment for
# sendmail and its related utilities. For example, SASL support can be
# added with settings such as:
#
# with SASLv1:
# SENDMAIL_CFLAGS=-I/usr/local/include/sasl1 -DSASL
# SENDMAIL_LDFLAGS=-L/usr/local/lib
# SENDMAIL_LDADD=-lsasl
#
# with SASLv2:
# SENDMAIL_CFLAGS=-I/usr/local/include -DSASL=2
# SENDMAIL_LDFLAGS=-L/usr/local/lib
# SENDMAIL_LDADD=-lsasl2
#
# Note: If you are using Cyrus SASL with other applications which require
# access to the sasldb file, you should add the following to your
# sendmail.mc file:
#
# define(`confDONT_BLAME_SENDMAIL',`GroupReadableSASLDBFile')
#
#SENDMAIL_CFLAGS=
#SENDMAIL_LDFLAGS=
#SENDMAIL_LDADD=
#SENDMAIL_DPADD=
#
# Setting SENDMAIL_SET_USER_ID will install the sendmail binary as a
# set-user-ID root binary instead of a set-group-ID smmsp binary and will
# prevent the installation of /etc/mail/submit.cf.
# This is a deprecated mode of operation. See etc/mail/README for more
# information.
#
#SENDMAIL_SET_USER_ID=
#
# The permissions to use on alias and map databases generated using
# /etc/mail/Makefile. Defaults to 0640.
#
#SENDMAIL_MAP_PERMS=
#
# Specify the X11 implementation being used
X_WINDOW_SYSTEM=xorg
# added by use.perl 2005-02-04 18:36:52
PERL_VER=5.8.6
PERL_VERSION=5.8.6
and my cvsup-file is:
# $FreeBSD: src/share/examples/cvsup/ports-supfile,v 1.32 2004/05/24
06:23:15 cjc Exp $
#
# This file contains all of the "CVSup collections" that make up the
# FreeBSD-current ports collection.
#
# CVSup (CVS Update Protocol) allows you to download the latest CVS
# tree (or any branch of development therefrom) to your system easily
# and efficiently (far more so than with sup, which CVSup is aimed
# at replacing). If you're running CVSup interactively, and are
# currently using an X display server, you should run CVSup as follows
# to keep your CVS tree up-to-date:
#
# cvsup ports-supfile
#
# If not running X, or invoking cvsup from a non-interactive script, then
# run it as follows:
#
# cvsup -g -L 2 ports-supfile
#
# You may wish to change some of the settings in this file to better
# suit your system:
#
# host=CHANGE_THIS.FreeBSD.org
# This specifies the server host which will supply the
# file updates. You must change it to one of the CVSup
# mirror sites listed in the FreeBSD Handbook at
# http://www.freebsd.org/doc/handbook/mirrors.html.
# You can override this setting on the command line
# with cvsup's "-h host" option.
#
# base=/var/db
# This specifies the root where CVSup will store information
# about the collections you have transferred to your system.
# A setting of "/var/db" will generate this information in
# /var/db/sup. Even if you are CVSupping a large number of
# collections, you will be hard pressed to generate more than
# ~1MB of data in this directory. You can override the
# "base" setting on the command line with cvsup's "-b base"
# option. This directory must exist in order to run CVSup.
#
# prefix=/usr
# This specifies where to place the requested files. A
# setting of "/usr" will place all of the files requested
# in "/usr/ports" (e.g., "/usr/ports/devel", "/usr/ports/lang").
# The prefix directory must exist in order to run CVSup.
# Defaults that apply to all the collections
#
# IMPORTANT: Change the next line to use one of the CVSup mirror sites
# listed at http://www.freebsd.org/doc/handbook/mirrors.html.
*default host=cvsup.au.FreeBSD.org
*default base=/var/db
*default prefix=/usr
*default release=cvs tag=.
*default delete use-rel-suffix
# If you seem to be limited by CPU rather than network or disk bandwidth,
try
# commenting out the following line. (Normally, today's CPUs are fast
enough
# that you want to run compression.)
*default compress
## Ports Collection.
#
# The easiest way to get the ports tree is to use the "ports-all"
# mega-collection. It includes all of the individual "ports-*"
# collections,
ports-all
# These are the individual collections that make up "ports-all". If you
# use these, be sure to comment out "ports-all" above.
#
# Be sure to ALWAYS cvsup the ports-base collection if you use any of the
# other individual collections below. ports-base is a mandatory collection
# for the ports collection, and your ports may not build correctly if it
# is not kept up to date.
#ports-base
#ports-accessibility
#ports-arabic
#ports-archivers
#ports-astro
#ports-audio
#ports-benchmarks
#ports-biology
#ports-cad
#ports-chinese
#ports-comms
#ports-converters
#ports-databases
#ports-deskutils
#ports-devel
#ports-dns
#ports-editors
#ports-emulators
#ports-finance
#ports-french
#ports-ftp
#ports-games
#ports-german
#ports-graphics
#ports-hebrew
#ports-hungarian
#ports-irc
#ports-japanese
#ports-java
#ports-korean
#ports-lang
#ports-mail
#ports-math
#ports-mbone
#ports-misc
#ports-multimedia
#ports-net
#ports-net-mgmt
#ports-news
#ports-palm
#ports-picobsd
#ports-polish
#ports-portuguese
#ports-print
#ports-russian
#ports-science
#ports-security
#ports-shells
#ports-sysutils
#ports-textproc
#ports-ukrainian
#ports-vietnamese
#ports-www
#ports-x11
#ports-x11-clocks
#ports-x11-fm
#ports-x11-fonts
#ports-x11-servers
#ports-x11-themes
#ports-x11-toolkits
#ports-x11-wm
so, I am really stumped with this error. I have deleted
/usr/ports/mozex/Makefile.xpi and done a fresh cvsup to no avail.
This is my first message to this list so hopefully it is to the right place
and that I have followed all the requirements. Thankyou in advance for your
help.
thanks,
Tim
More information about the freebsd-questions
mailing list