format slice
Freek Nossin
freeknossin at tiscali.nl
Sat Mar 12 15:03:52 PST 2005
> -----Original Message-----
> From: Alejandro Pulver [mailto:alejandro at varnet.biz]
> Sent: zaterdag 12 maart 2005 23:44
> To: Freek Nossin
> Cc: freebsd-questions at freebsd.org; 'Jerry McAllister'
> Subject: Re: format slice
>
> On Sat, 12 Mar 2005 21:09:33 +0100
> "Freek Nossin" <freeknossin at tiscali.nl> wrote:
>
> > Hello, formatting is almost complete...
> >
> > My new problem is that bsdlabel didn't create a new partition after
> > bsdlabel-e ad0s1. Below is an extensive output of some commands, but
> > you might want to skip to the last alinea ;).
> >
> > I used fdisk to create a new slice. I copied the exact format of the
> > previous slice (on which the windows installation resided), so I
> > didn't have to worry about the "overlapping slices". I got this nice
> > output:
> >
> > pcwin451# fdisk
> > ******* Working on device /dev/ad0 *******
> > parameters extracted from in-core disklabel are:
> > cylinders=39704 heads=16 sectors/track=63 (1008 blks/cyl)
> >
> > Figures below won't work with BIOS for partitions not in cyl 1
> > parameters to be used for BIOS calculations are:
> > cylinders=39704 heads=16 sectors/track=63 (1008 blks/cyl)
> >
> > Media sector size is 512
> > Warning: BIOS sector numbering starts with sector 1
> > Information from DOS bootblock is:
> > The data for partition 1 is:
> > sysid 0 (0000),(unused)
> > start 63, size 20820177 (10166 Meg), flag 0
> > beg: cyl 0/ head 1/ sector 1;
> > end: cyl 174/ head 15/ sector 63
> > The data for partition 2 is:
> > sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD)
> > start 20820240, size 19201392 (9375 Meg), flag 80 (active)
> > beg: cyl 1023/ head 255/ sector 63;
> > end: cyl 1023/ head 15/ sector 63
> > The data for partition 3 is:
> > <UNUSED>
> > The data for partition 4 is:
> > <UNUSED>
> >
> > Part 1 is the new slice which I want to use.
> > Then I used bsdlabel to create a label on ad0s1 by typing:
> >
> > #bsdlabel -w ad0s1
> >
> > And following the handbook, my next command was:
> >
> > #bsdlabel -e ad0s1
> >
> > Now I wrote in the text editor (I admit, after 4 tries and a lot of
> > reading...):
> >
> > # /dev/ad0s1:
> > 8 partitions:
> > # size offset fstype [fsize bsize bps/cpg]
> > c: 20820177 0 unused 0 0 # "raw" part,
> > don't e: 20820177 0 4.2BSD 2048 16384 32776
> >
> >
> > now I wanted to use newfs to create a file system on ad0s1e, but it
> > could not. My problem is illustrated by my ls output:
> >
> > pcwin451# ls /dev/ad*
> > /dev/ad0 /dev/ad0s2 /dev/ad0s2b /dev/ad0s2d
> > /dev/ad0s1 /dev/ad0s2a /dev/ad0s2c /dev/ad0s2e
> >
> > bsdlabel -e didn't create a new partition, although the output of
> > bsdlabel ad0s1 is:
> >
> > pcwin451# disklabel ad0s1
> > # /dev/ad0s1:
> > 8 partitions:
> > # size offset fstype [fsize bsize bps/cpg]
> > c: 20820177 0 unused 0 0 # "raw" part,
> > don't
> > edit
> > e: 20820161 16 4.2BSD 2048 16384 32776
> >
> > How can this be? (and how do I fix it...?)
> >
> > Thanks for your help already so far
> >
> > Freek
> >
>
> Hello,
>
> In my second disk I have free space between two slices so I tried the
> procedure by myself.
>
> When I did a 'bsdlabel -w /dev/adXsY' (without editing them) I ended
> with a partition labeled 'a', and it instantly appeared in '/dev/'. Then
> I did what you have done ('bsdlabel -e <slice>') and it also appeared in
> '/dev'.
>
> I do not know about this, but maybe this helps:
>
> 1) Try with only 'bsdlabel -w <slice>'. The partition should appear as
> 'a'.
>
> 2) If the partition does not appear in '/dev/' then you can reinitialize
> the ATA channel (0 or 1, I think your disk is in 0) your disk is in,
> with 'atacontrol reinit <channel>'. For a list of ATA channels
> with the devices do 'atacontrol list'.
>
> ***WARNING***: do ***NOT*** 'detach' and 'attach' the channel your
> device your running hard disk (that contain the FreeBSD you are
> running) is connected to (but you can safely 'reinit' it). A 'detach'
> removes the disk and slices/partitions from the kernel and powers down
> the devices in that channel, so FreeBSD will stall when it tries to
> read/write on its partitions ('/', '/usr', etc.). I could detach and
> atach it once (in less than 5 seconds), but the other time it crashed
> my machine (I had to rewrite this mail three times, because I was
> experimenting with 'atacontrol'). It is more safe to reboot the machine.
>
> Best Regards,
> Ale
Thank, but unfortunately it dit not help
pcwin451# atacontrol reinit 0
Master: ad0 <Maxtor 5T020H2/TAH71DP0> ATA/ATAPI revision 6
Slave: no device present
pcwin451# bsdlabel -w ad0s1
pcwin451# ls /dev/ad*
/dev/ad0 /dev/ad0s2 /dev/ad0s2b /dev/ad0s2d
/dev/ad0s1 /dev/ad0s2a /dev/ad0s2c /dev/ad0s2e
More information about the freebsd-questions
mailing list