atapci0 controller (was: "Sysinstall: No disks found.)
Robert Grzyb
grzybr at mail.zetosa.com.pl
Fri Mar 11 04:45:59 PST 2005
Hi!
I want to install FreeBSD 5.3-RELEASE on Compaq Deskpro 4000 model
5166 (P200 MHz with 48 Mb RAM):
- Hard drive Samsung SV0432D 4.3 Gb
- CD-ROM drive Veuego 616P, Acer Peripherals
but when booted kernel doesn't detect my drives!
I decided to try floppies from 4.11-RELASE. The computer boot-up
and detect both drives (with some errors - see attached dmesg.411).
Comparing, I have found out that atapci0 uses incorrect resources:
port 0x1010-0x101f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7
at device 15.1 on pci0
when it should use this instead:
port 0x1010-0x101f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7
irq 0 at device 15.1 on pci0
My question is: how force atapci0 to use correct values or,
how convince pci0 to properly detect the controller.
I've already try boot with hw.pci.enable_io_modes set to 0.
For easy comparison I've attached boot messages for both RELEASE
-5.3 (dmesg.53) and RELEASE-4.11 (dmesg.411).
Please help me get RELEASE-5.3 running on this particular hardware.
TIA,
Robert Grzyb.
-------------- next part --------------
SMAP type=01 base=0000000000000000 len=000000000009fc00
SMAP type=02 base=000000000009fc00 len=0000000000000400
SMAP type=02 base=00000000000e0000 len=0000000000020000
SMAP type=01 base=0000000000100000 len=0000000002f00000
SMAP type=02 base=00000000fffe0000 len=0000000000020000
SMAP type=02 base=00000000fffe0000 len=0000000000020000
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-RELEASE #0: Fri Nov 5 04:19:18 UTC 2004
root at harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/kernel" at 0xc0e5b000.
Preloaded elf module "/acpi.ko" at 0xc0e5b1c0.
Preloaded mfs_root "/mfsroot" at 0xc0e5b260.
Calibrating clock(s) ... i8254 clock: 1193201 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 200455495 Hz
CPU: Pentium/P54C (200.46-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x52c Stepping = 12
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 50331648 (48 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001026000 - 0x0000000002ef7fff, 32317440 bytes (7890 pages)
avail memory = 35663872 (34 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fa000
bios32: Entry = 0xf3c00 (c00f3c00) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf3c00+0x6b2
pnpbios: Found PnP BIOS data at 0xc00f9600
pnpbios: Entry = f0000:66e0 Rev = 1.0
pnpbios: OEM ID 15ae110e
Other BIOS signatures found:
Intel Pentium detected, installing workaround for F00F bug
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
io: <I/O>
mem: <memory>
null: <null device, zero device>
ACPI-0159: *** Error: AcpiLoadTables: Could not get RSDP, AE_NO_ACPI_TABLES
ACPI-0213: *** Error: AcpiLoadTables: Could not load tables: AE_NO_ACPI_TABLES
ACPI: table load failed: AE_NO_ACPI_TABLES
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x0000f800
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=ff] 1 2 3 4 5 6 7 8 9 10 [class=030000] [hdr=00] is there (id=00b81013)
pcibios: BIOS version 2.10
legacy_pcib_identify: no bridge found, adding pcib0 anyway
pcib0 pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base 41000000, size 24, enabled
found-> vendor=0x1013, dev=0x00b8, revid=0x00
bus=0, slot=10, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[10]: type 4, range 32, base 00001000, size 4, enabled
found-> vendor=0x0e11, dev=0xae35, revid=0x10
bus=0, slot=11, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0280, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
found-> vendor=0x0e11, dev=0xa0f3, revid=0x0c
bus=0, slot=15, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0147, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 00001010, size 4, enabled
found-> vendor=0x0e11, dev=0xae33, revid=0x0a
bus=0, slot=15, func=1
class=01-01-fa, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
pci0: <display, VGA> at device 10.0 (no driver attached)
tl0: <Compaq NetFlex-3/P Integrated> port 0x1000-0x100f irq 11 at device 11.0 on pci0
tl0: Reserved 0x10 bytes for rid 0x10 type 4 at 0x1000
miibus0: <MII bus> on tl0
tlphy0: <ThunderLAN 10baseT media interface> on miibus0
tlphy0: 10base2/BNC, 10base5/AUI, 10baseT, 10baseT-FDX, auto
tl0: bpf attached
tl0: Ethernet address: 00:80:5f:4b:f2:e8
tl0: if_start running deferred for Giant
tl0: [GIANT-LOCKED]
isab0: <PCI-ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <GENERIC ATA controller> port 0x1010-0x101f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1010
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=51 ostat1=00
ata1-master: stat=0x10 err=0x01 lsb=0x14 msb=0xeb
ata1-slave: stat=0x00 err=0x01 lsb=0xff msb=0xff
ata1: reset tp2 stat0=10 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: [MPSAFE]
cpu0 on motherboard
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
pnpbios: 16 devices, largest 166 bytes
PNP0401: adding irq mask 0x80
PNP0401: adding dma mask 0x8
PNP0401: adding io range 0x378-0x37f, size=0x8, align=0
PNP0401: adding io range 0x778-0x77b, size=0x4, align=0
pnpbios: handle 1 device ID PNP0401 (0104d041)
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0
PNP0501: adding irq mask 0x10
pnpbios: handle 2 device ID PNP0501 (0105d041)
PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0
PNP0501: adding irq mask 0x8
pnpbios: handle 3 device ID PNP0501 (0105d041)
PNP0700: adding irq mask 0x40
PNP0700: adding dma mask 0x4
PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0
pnpbios: handle 5 device ID PNP0700 (0007d041)
CPQa0ef: adding io range 0xc50-0xc51, size=0x2, align=0
pnpbios: handle 6 device ID CPQa0ef (efa0110e)
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0xf0000-0xfffff, size=0x10000
PNP0c01: adding fixed memory32 range 0x100000-0x2ffffff, size=0x2f00000
pnpbios: handle 7 device ID PNP0c01 (010cd041)
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0
PNP0c04: adding irq mask 0x2000
pnpbios: handle 8 device ID PNP0c04 (040cd041)
PNP0100: adding io range 0x40-0x43, size=0x4, align=0
PNP0100: adding irq mask 0x1
pnpbios: handle 10 device ID PNP0100 (0001d041)
PNP0200: adding io range 0-0xf, size=0x10, align=0
PNP0200: adding io range 0x80-0x8f, size=0x10, align=0
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0
PNP0200: adding dma mask 0x10
pnpbios: handle 11 device ID PNP0200 (0002d041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0
pnpbios: handle 12 device ID PNP0800 (0008d041)
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0
PNP0b00: adding irq mask 0x100
pnpbios: handle 13 device ID PNP0b00 (000bd041)
PNP0303: adding io range 0x60-0x60, size=0x1, align=0
PNP0303: adding io range 0x64-0x64, size=0x1, align=0
PNP0303: adding irq mask 0x2
pnpbios: handle 14 device ID PNP0303 (0303d041)
PNP0f13: adding irq mask 0x1000
pnpbios: handle 15 device ID PNP0f13 (130fd041)
pnpbios: handle 16 device ID PNP0a03 (030ad041)
PNP0c02: adding io range 0x10-0x1f, size=0x10, align=0
PNP0c02: adding io range 0x50-0x52, size=0x3, align=0
PNP0c02: adding io range 0x78-0x79, size=0x2, align=0
PNP0c02: adding io range 0x90-0x91, size=0x2, align=0
PNP0c02: adding fixed io range 0x92-0x92, size=0x1, align=0x1
PNP0c02: adding io range 0x93-0x9f, size=0xd, align=0
PNP0c02: adding io range 0x398-0x399, size=0x2, align=0
PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0
PNP0c02: adding io range 0xc06-0xc07, size=0x2, align=0
PNP0c02: adding io range 0xc52-0xc52, size=0x1, align=0
PNP0c02: adding io range 0xcd6-0xcd7, size=0x2, align=0
PNP0c02: adding io range 0xcf8-0xcff, size=0x8, align=0
PNP0c02: adding io range 0x40b-0x40b, size=0x1, align=0
PNP0c02: adding io range 0x4d6-0x4d6, size=0x1, align=0
PNP0c02: adding io range 0xc00-0xc01, size=0x2, align=0
PNP0c02: adding io range 0xc14-0xc14, size=0x1, align=0
PNP0c02: adding io range 0xc4a-0xc4a, size=0x1, align=0
PNP0c02: adding io range 0xc6c-0xc6c, size=0x1, align=0
PNP0c02: adding io range 0xc6f-0xc6f, size=0x1, align=0
pnpbios: handle 17 device ID PNP0c02 (020cd041)
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x1d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0065
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 90 02 3c
psm: status 90 02 3c
psm: status 90 02 3c
psm: data 08 00 00
psm: status 00 00 28
psm: status 00 02 64
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: ic_type 90 part_id 73
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: ic_type 90 part_id 73
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c ae 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c ae 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c ae 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0401> at port 0x378-0x37f on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x2f8-0x2ff on isa0
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0
adv1: Invalid baseport of 0xc50 specified. Nearest valid baseport is 0x330. Failing probe.
unknown: <CPQa0ef> failed to probe at port 0xc50-0xc51 on isa0
adv1: Invalid baseport of 0xf0 specified. Nearest valid baseport is 0x100. Failing probe.
adv1: Invalid baseport of 0x40 specified. Nearest valid baseport is 0x100. Failing probe.
adv1: Invalid baseport of 0x0 specified. Nearest valid baseport is 0x100. Failing probe.
adv1: Invalid baseport of 0x61 specified. Nearest valid baseport is 0x100. Failing probe.
unknown: <PNP0800> failed to probe at port 0x61 on isa0
adv1: Invalid baseport of 0x70 specified. Nearest valid baseport is 0x100. Failing probe.
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 on isa0
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0f13> at irq 12 on isa0
adv1: Invalid baseport of 0x10 specified. Nearest valid baseport is 0x100. Failing probe.
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 200455495 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
md0: Preloaded image </mfsroot> 4423680 bytes at 0xc0a217f0
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
GEOM: Configure md0a, start 0 length 4423680 end 4423679
GEOM: Configure md0c, start 0 length 4423680 end 4423679
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
GEOM: Configure fd0a, start 0 length 1474560 end 1474559
GEOM: Configure fd0c, start 0 length 1474560 end 1474559
Mounting root from ufs:/dev/md0
start_init: trying /sbin/init
start_init: trying /sbin/oinit
start_init: trying /sbin/init.bak
start_init: trying /stand/sysinstall
-------------- next part --------------
SMAP type=01 base=0000000000000000 len=000000000009fc00
SMAP type=02 base=000000000009fc00 len=0000000000000400
SMAP type=02 base=00000000000e0000 len=0000000000020000
SMAP type=01 base=0000000000100000 len=0000000002f00000
SMAP type=02 base=00000000fffe0000 len=0000000000020000
SMAP type=02 base=00000000fffe0000 len=0000000000020000
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.11-RELEASE #0: Fri Jan 21 17:27:16 GMT 2005
root at perseus.cse.buffalo.edu:/usr/obj/usr/src/sys/BOOTMFS
Calibrating clock(s) ... TSC clock: 200458240 Hz, i8254 clock: 1193204 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 200455593 Hz
CPU: Pentium/P54C (200.46-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x52c Stepping = 12
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 50331648 (49152K bytes)
Physical memory chunk(s):
0x000001000 - 0x00009efff, 647168 bytes (158 pages)
0x00084e000 - 0x002ff7fff, 41590784 bytes (10154 pages)
config> intro
avail memory = 40689664 (39736K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00fa000
bios32: Entry = 0xf3c00 (c00f3c00) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0x6b2
pnpbios: Found PnP BIOS data at 0xc00f9600
pnpbios: Entry = f0000:66e0 Rev = 1.0
pnpbios: OEM ID 15ae110e
Other BIOS signatures found:
ACPI: 00000000
Preloaded elf kernel "kernel" at 0xc0827000.
Preloaded mfs_root "/mfsroot" at 0xc0827084.
Intel Pentium detected, installing workaround for F00F bug
md0: Preloaded image </mfsroot> 4423680 bytes at 0xc03edc14
Creating DISK md0
Creating DISK md1
md1: Malloc disk
Math emulator present
pci_open(1): mode 1 addr port (0x0cf8) is 0x0000f800
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=ff] 1 2 3 4 5 6 7 8 9 10 [class=030000] [hdr=00] is there (id=00b81013)
nexus_pcib_identify: no bridge found, adding pcib0 anyway
npx0: <math processor> on motherboard
npx0: INT 16 interface
i586_bzero() bandwidth = 131388779 bytes/sec
bzero() bandwidth = 66024032 bytes/sec
pcib0 on motherboard
found-> vendor=0x0e11, dev=0x4000, revid=0x01
class=06-00-00, hdrtype=0x7f, mfdev=1
subordinatebus=0 secondarybus=0
intpin=, irq=96
found-> vendor=0x0e11, dev=0x4000, revid=0x01
class=06-00-00, hdrtype=0x7f, mfdev=1
subordinatebus=0 secondarybus=0
intpin=w, irq=32
found-> vendor=0x0e11, dev=0x4000, revid=0x01
class=06-00-00, hdrtype=0x7f, mfdev=1
subordinatebus=0 secondarybus=0
intpin=v, irq=32
found-> vendor=0x0e11, dev=0x4000, revid=0x01
class=06-00-00, hdrtype=0x7f, mfdev=1
subordinatebus=0 secondarybus=0
intpin=u, irq=32
found-> vendor=0x0e11, dev=0x4000, revid=0x01
class=06-00-00, hdrtype=0x7f, mfdev=1
subordinatebus=0 secondarybus=0
intpin=t, irq=32
found-> vendor=0x0e11, dev=0x4000, revid=0x01
class=06-00-00, hdrtype=0x7f, mfdev=1
subordinatebus=0 secondarybus=0
intpin=s, irq=32
found-> vendor=0x0e11, dev=0x4000, revid=0x01
class=06-00-00, hdrtype=0x7f, mfdev=1
subordinatebus=0 secondarybus=0
intpin=r, irq=32
found-> vendor=0x0e11, dev=0x4000, revid=0x01
class=06-00-00, hdrtype=0x7f, mfdev=1
subordinatebus=0 secondarybus=0
intpin=q, irq=32
found-> vendor=0x1013, dev=0x00b8, revid=0x00
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base 41000000, size 24
found-> vendor=0x0e11, dev=0xae35, revid=0x10
class=02-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base 00001000, size 4
map[14]: type 1, range 32, base 40000000, size 4
found-> vendor=0x0e11, dev=0xa0f3, revid=0x0c
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x0e11, dev=0xae33, revid=0x0a
class=01-01-fa, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=0
map[10]: type 1, range 32, base 000001f0, size 3
map[14]: type 1, range 32, base 000003f4, size 2
map[18]: type 1, range 32, base 00000170, size 3
map[1c]: type 1, range 32, base 00000374, size 2
map[20]: type 1, range 32, base 00001010, size 4
pci0: <PCI bus> on pcib0
pci0: <Cirrus Logic GD5446 SVGA controller> (vendor=0x1013, dev=0x00b8) at 10.0 irq 11
tl0: <Compaq NetFlex-3/P Integrated> port 0x1000-0x100f mem 0x40000000-0x4000000f irq 11 at device 11.0 on pci0
tl0: Ethernet address: 00:80:5f:4b:f2:e8
miibus0: <MII bus> on tl0
tlphy0: <ThunderLAN 10baseT media interface> on miibus0
tlphy0: 10base2/BNC, 10base5/AUI, 10baseT, 10baseT-FDX, auto
bpf: tl0 attached
isab0: <PCI to ISA bridge (vendor=0e11 device=a0f3)> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Generic PCI ATA controller> port 0x1010-0x101f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 irq 0 at device 15.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x1010
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x1018
ata1: mask=03 ostat0=51 ostat2=00
ata1-master: ATAPI 14 eb
ata1-slave: ATAPI ff ff
ata1: mask=03 stat0=10 stat1=00
ata1: devices=04
ata1: at 0x170 irq 15 on atapci0
ex_isa_identify()
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata2 failed to probe at port 0x1f0 irq 14 on isa0
ata3 failed to probe at port 0x170 irq 15 on isa0
adv0 failed to probe on isa0
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x330
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x334
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x230
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x234
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x130
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x134
bt0 failed to probe at port 0x134-0x137 on isa0
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0 failed to probe at port 0x134-0x137 on isa0
aic0 failed to probe at port 0x140-0x15f on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x1d0000
psm0: current command byte:0065
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 90 02 3c
psm: status 90 02 3c
psm: status 90 02 3c
psm: data 08 00 00
psm: status 00 00 28
psm: status 00 02 64
psm: data 08 00 00
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this adapter
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c be 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c ae 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c be 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
cs0: not probed (disabled)
sn0: not probed (disabled)
isa_probe_children: probing PnP devices
BIOS Geometries:
0:022aef3f 0..554=555 cylinders, 0..239=240 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: lo0 attached
bpf: sl0 attached
Creating DISK ad0
ar: FreeBSD check1 failed
ad0: <SAMSUNG SV0432D/KS200> ATA-3 disk at ata0-master
ad0: 4112MB (8421840 sectors), 8912 C, 15 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, BIOSDMA
ad0: piomode=4 dmamode=2 udmamode=4 cblid=1
ata1-master: piomode=4 dmamode=2 udmamode=-1 dmaflag=1
ata1-master: success setting PIO4 on generic chip
acd0: MODE_SENSE_BIG command timeout - resetting
ata1: resetting devices .. ata1: mask=03 ostat0=58 ostat2=00
acd0: ATAPI 14 eb
ata1-slave: ATAPI ff ff
ata1: mask=03 stat0=10 stat1=00
ata1: devices=04
done
<------------------------------------------------------------------->
< boot-up process get stuck here repeating 7 lines in endless loop >
<------------------------------------------------------------------->
acd0: MODE_SENSE_BIG command timeout - resetting
ata1: resetting devices .. ata1: mask=03 ostat0=d0 ostat2=80
acd0: ATAPI 14 eb
ata1-slave: ATAPI ff ff
ata1: mask=03 stat0=10 stat1=00
ata1-slave: ATA 01 ff
ata1: devices=04
done
<------------------------------------------------------------------->
< after pressing ^C boot-up proces continued >
<------------------------------------------------------------------->
acd0: MODE_SENSE_BIG command timeout - resetting
ata1: resetting devices .. ata1: mask=03 ostat0=d0 ostat2=80
acd0: ATAPI 14 eb
ata1-slave: ATAPI ff ff
ata1: mask=03 stat0=10 stat1=00
ata1-slave: ATA 01 ff
ata1: devices=04
done
acd0: </P61A> CDROM drive at ata1 as master
acd0: read 500KB/s (3541KB/s), PIO4
acd0: Reads: CD-RW
acd0: Writes:
acd0: Mechanism: caddy
acd0: Medium: CD-ROM 120mm audio disc
Mounting root from ufs:/dev/md0c
start_init: trying /sbin/init
start_init: trying /sbin/oinit
start_init: trying /sbin/init.bak
More information about the freebsd-questions
mailing list