help with matrox parhelia 256Mb with dual head = Success
Eric Ekong
eric at unixtechs.org
Sun Jul 3 01:24:34 GMT 2005
Looks like I have figured it out and things are working in DVI mode
with dual head desktop. It took a couple of friends over my shoulder
to figure this out, but once I did what a wonderful thing.
Attaching my xorg.conf and X.0.log for viewing and I hope this helps
other people out as every other thread I have seen about this card has
either gone un answered or the person has just given up and gone with a
ati card (which I was about an hour from going to do).
Eric
* Eric Ekong <eric at unixtechs.org> [050701 17:34]:
> As far as I know there is no freebsd driver for the P-Series
> of the Matrox card P650, P750, and Parhelia. Everything I could
> find points to using the downloadable driver. The matrox driver for
> these cards is mtx as opposed tot he mga/mga_hal/mgadrm.
>
> Mind sharing your xorg.conf just so I can compare. I had Xinerama in
> and with it in, my desktops just showed duplicates.
>
> Eric
> * Paul Schmehl <pauls at utdallas.edu> [050701 17:12]:
> > --On Friday, July 01, 2005 13:56:00 -0400 Eric Ekong <eric at unixtechs.org>
> > wrote:
> >
> > >Initially the second monitor wasn't coming up at all. Now, with a
> > >minor change or two, I have the second monitor coming up, but it seems
> > >to bring up a second window manager that I have no access to..., the
> > >second monitor just kinda sits there in the default kde start screen.
> > >
> > >That along with the fact that if I enable Xinerama, I lock up X to the
> > >point where I can't drop to a virtual screen because the keyboard and
> > >mouse lock up as well. If I've gotten this far I must be only a step
> > >or two away from getting this to work fully.
> > >
> > >Need is to have one desktop stretched across 2 monitors. Roughly
> > >3200x1600 desktop.
> > >
> > >Do you have this working with the parhelia?
> >
> > No, I have a Radeon X300 card.
> >
> > > If so are you using Xorg
> > >or XFree86 in ports. I'm guess XFree86 would work in this setup
> > >better, but it is just a hunch.
> > >
> > I'm using Xorg and Xinerama - two 19 inch monitors - one desktop. The
> > problem that I have is that the right screen won't display until the system
> > goes to sleep. So, when I first login, I change the setttings to get the
> > system to go to sleep in one minute, wait one minute, then move the mouse.
> > The right screen then works as long as I don't log out. (Locking and
> > unlocking the screen works just fine.)
> >
> > But the problems you're having sound more driver related. Was there a
> > reason you chose the Linux driver instead of the native FBSD one?
> >
> > Paul Schmehl (pauls at utdallas.edu)
> > Adjunct Information Security Officer
> > University of Texas at Dallas
> > AVIEN Founding Member
> > http://www.utdallas.edu/ir/security/
> > _______________________________________________
> > freebsd-questions at freebsd.org mailing list
> > http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> > To unsubscribe, send any mail to "freebsd-questions-unsubscribe at freebsd.org"
>
> --
> =======================================================
> Eric I. Ekong eric at unixtechs.org
> FreeBSD - The Power to Serve http://www.freebsd.org
> K Desktop Environment on FreeBSD http://freebsd.kde.org
> =======================================================
>
> Laws of Serendipity:
>
> (1) In order to discover anything, you must be looking for
> something.
> (2) If you wish to make an improved product, you must already
> be engaged in making an inferior one.
>
> _______________________________________________
> freebsd-questions at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "freebsd-questions-unsubscribe at freebsd.org"
--
=======================================================
Eric I. Ekong eric at unixtechs.org
FreeBSD - The Power to Serve http://www.freebsd.org
K Desktop Environment on FreeBSD http://freebsd.kde.org
=======================================================
Laws of Serendipity:
(1) In order to discover anything, you must be looking for
something.
(2) If you wish to make an improved product, you must already
be engaged in making an inferior one.
-------------- next part --------------
X Window System Version 6.8.2
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: FreeBSD 5.4 i386 [ELF]
Current Operating System: FreeBSD blackguy.unixtechs.org 5.4-STABLE FreeBSD 5.4-STABLE #26: Sat Jul 2 09:18:25 EDT 2005 root@:/usr/obj/usr/src/sys/BLACKGUY i386
Build Date: 27 June 2005
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Jul 2 21:04:04 2005
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen 0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Parhelia_256_0"
(**) |-->Screen "Screen 1" (1)
(**) | |-->Monitor "Monitor1"
(**) | |-->Device "Parhelia_256_1"
(**) |-->Input Device "Microsoft_Natural"
(**) |-->Input Device "Microsoft Intellimouse Explorer"
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/100dpi,/usr/X11R6/lib/X11/fonts/75dpi,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/cyrillic,/usr/X11R6/lib/X11/fonts/URW,/usr/X11R6/lib/X11/fonts/freefont,/usr/X11R6/lib/X11/fonts/misc"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R6/lib/modules"
(**) Option "AllowMouseOpenFail"
(**) Option "NoPM"
(**) Option "Xinerama" "true"
(**) Xinerama: enabled
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.7
X.Org XInput driver : 0.4
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on freebsd
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 9
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 10de,01e0 card 1043,80ac rev c1 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 10de,01ea card 1043,80ac rev c1 class 05,00,00 hdr 80
(II) PCI: 00:00:2: chip 10de,01ee card 1043,80ac rev c1 class 05,00,00 hdr 80
(II) PCI: 00:00:3: chip 10de,01ed card 1043,80ac rev c1 class 05,00,00 hdr 80
(II) PCI: 00:00:4: chip 10de,01ec card 1043,80ac rev c1 class 05,00,00 hdr 80
(II) PCI: 00:00:5: chip 10de,01ef card 1043,80ac rev c1 class 05,00,00 hdr 80
(II) PCI: 00:01:0: chip 10de,0060 card 1043,80ad rev a4 class 06,01,00 hdr 80
(II) PCI: 00:01:1: chip 10de,0064 card 1043,0c11 rev a2 class 0c,05,00 hdr 80
(II) PCI: 00:02:0: chip 10de,0067 card 1043,0c11 rev a4 class 0c,03,10 hdr 80
(II) PCI: 00:02:1: chip 10de,0067 card 1043,0c11 rev a4 class 0c,03,10 hdr 80
(II) PCI: 00:02:2: chip 10de,0068 card 1043,0c11 rev a4 class 0c,03,20 hdr 80
(II) PCI: 00:08:0: chip 10de,006c card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:09:0: chip 10de,0065 card 1043,0c11 rev a2 class 01,01,8a hdr 00
(II) PCI: 00:1e:0: chip 10de,01e8 card 0000,0000 rev c1 class 06,04,00 hdr 01
(II) PCI: 01:07:0: chip 10b7,5950 card 0000,0000 rev 00 class 02,00,00 hdr 00
(II) PCI: 01:08:0: chip 109e,036e card 1002,0003 rev 02 class 04,00,00 hdr 80
(II) PCI: 01:08:1: chip 109e,0878 card 1002,0003 rev 02 class 04,80,00 hdr 80
(II) PCI: 01:09:0: chip 1274,5880 card 1274,2000 rev 02 class 04,01,00 hdr 00
(II) PCI: 02:00:0: chip 102b,0528 card 102b,1030 rev 06 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:8:0), (0,1,1), BCTRL: 0x0202 (VGA_EN is cleared)
(II) Bus 1 I/O range:
[0] -1 0 0x0000d000 - 0x0000dfff (0x1000) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xd5000000 - 0xd5ffffff (0x1000000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd2000000 - 0xd2ffffff (0x1000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xd3000000 - 0xd4ffffff (0x2000000) MX[B]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B]
(--) PCI: (1:8:0) Brooktree Corporation Bt878 Video Capture rev 2, Mem @ 0xd2000000/12
(--) PCI:*(2:0:0) Matrox Graphics, Inc. unknown chipset (0x0528) rev 6, Mem @ 0xc0000000/28, 0xd3000000/13
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xd0000000 from 0xdfffffff to 0xcfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xd2001000 - 0xd2001fff (0x1000) MX[B]E
[1] -1 0 0xd6001000 - 0xd6001fff (0x1000) MX[B]E
[2] -1 0 0xd6000000 - 0xd7ffffff (0x2000000) MX[B]E
[3] -1 0 0xd6002000 - 0xd6003fff (0x2000) MX[B]E
[4] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]EO
[5] -1 0 0xd3000000 - 0xd3001fff (0x2000) MX[B](B)
[6] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[7] -1 0 0xd2000000 - 0xd2000fff (0x1000) MX[B](B)
[8] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]E
[9] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]E
[10] -1 0 0x0000f000 - 0x0000f0ff (0x100) IX[B]E
[11] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]E
(II) PCI Memory resource overlap reduced 0xd6000000 from 0xd7ffffff to 0xd6000fff
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xd2001000 - 0xd2001fff (0x1000) MX[B]E
[1] -1 0 0xd6001000 - 0xd6001fff (0x1000) MX[B]E
[2] -1 0 0xd6000000 - 0xd6000fff (0x1000) MX[B]E
[3] -1 0 0xd6002000 - 0xd6003fff (0x2000) MX[B]E
[4] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]EO
[5] -1 0 0xd3000000 - 0xd3001fff (0x2000) MX[B](B)
[6] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[7] -1 0 0xd2000000 - 0xd2000fff (0x1000) MX[B](B)
[8] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]E
[9] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]E
[10] -1 0 0x0000f000 - 0x0000f0ff (0x100) IX[B]E
[11] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]E
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xd2001000 - 0xd2001fff (0x1000) MX[B]E
[6] -1 0 0xd6001000 - 0xd6001fff (0x1000) MX[B]E
[7] -1 0 0xd6000000 - 0xd6000fff (0x1000) MX[B]E
[8] -1 0 0xd6002000 - 0xd6003fff (0x2000) MX[B]E
[9] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]EO
[10] -1 0 0xd3000000 - 0xd3001fff (0x2000) MX[B](B)
[11] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[12] -1 0 0xd2000000 - 0xd2000fff (0x1000) MX[B](B)
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[15] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]E
[16] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]E
[17] -1 0 0x0000f000 - 0x0000f0ff (0x100) IX[B]E
[18] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]E
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/freebsd/libdrm.a
(II) Module drm: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "mtx"
(II) Loading /usr/X11R6/lib/modules/drivers/mtx_drv.o
(II) Module mtx: vendor="Matrox Graphics Inc."
compiled for 4.3.99.902, module version = 1.4.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) Loading extension MTXGamma
(II) LoadModule: "kbd"
(II) Loading /usr/X11R6/lib/modules/input/kbd_drv.o
(II) Module kbd: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) MTX: Driver for Matrox chipsets: P-Series Family A, P-Series Family B,
P-Series Family C, P-Series Family D
(II) Primary Device is: PCI 02:00:0
(--) Chipset P-Series Family B found
(--) Chipset P-Series Family B found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xd2001000 - 0xd2001fff (0x1000) MX[B]E
[6] -1 0 0xd6001000 - 0xd6001fff (0x1000) MX[B]E
[7] -1 0 0xd6000000 - 0xd6000fff (0x1000) MX[B]E
[8] -1 0 0xd6002000 - 0xd6003fff (0x2000) MX[B]E
[9] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]EO
[10] -1 0 0xd3000000 - 0xd3001fff (0x2000) MX[B](B)
[11] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[12] -1 0 0xd2000000 - 0xd2000fff (0x1000) MX[B](B)
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[15] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]E
[16] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]E
[17] -1 0 0x0000f000 - 0x0000f0ff (0x100) IX[B]E
[18] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]E
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xd2001000 - 0xd2001fff (0x1000) MX[B]E
[6] -1 0 0xd6001000 - 0xd6001fff (0x1000) MX[B]E
[7] -1 0 0xd6000000 - 0xd6000fff (0x1000) MX[B]E
[8] -1 0 0xd6002000 - 0xd6003fff (0x2000) MX[B]E
[9] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]EO
[10] -1 0 0xd3000000 - 0xd3001fff (0x2000) MX[B](B)
[11] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[12] -1 0 0xd2000000 - 0xd2000fff (0x1000) MX[B](B)
[13] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[14] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[15] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[18] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]E
[19] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]E
[20] -1 0 0x0000f000 - 0x0000f0ff (0x100) IX[B]E
[21] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]E
[22] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[23] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Setting vga for screen 1.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(II) MTX(0): MGA instIndex = 0
(--) MTX(0): Linear framebuffer at 0xC0000000
(--) MTX(0): MMIO registers at 0xD3000000
(==) MTX(0): BIOS at 0xC0000
(II) MTX(0): Device Id [0528] Subsys Id [1030]
(II) MTX(0): Device Name [Parhelia 256MB Dual DVI]
(**) MTX(0): Total Video RAM: 262144 kByte
(==) MTX(0): Write-combining range (0xd3000000,0x2000) was already clear
(==) MTX(0): Write-combining range (0xc0000000,0x10000000)
(**) MTX(0): Depth 24, (**) framebuffer bpp 32
(==) MTX(0): Default visual is TrueColor
(**) MTX(0): Depth 24, (**) framebuffer bpp 32
(==) MTX(0): Default visual is TrueColor
(==) MTX(0): RGB weight 888
(**) MTX(0): Option "HWcursor" "off"
(**) MTX(0): Option "Busmastering" "on"
(**) MTX(0): Option "DigitalScreen1" "on"
(II) MTX(0): Monitor Input Type = 2
(==) MTX(0): Using gamma correction (1.0, 1.0, 1.0)
(II) MTX(0): Acceleration is enabled
(WW) MTX(0): Using software cursor
(II) MTX(0): Forcing Digital Output
(II) MTX(0): Digital is available
(==) MTX(0): Min pixel clock is 12 MHz
(==) MTX(0): Max pixel clock is 164 MHz
(II) MTX(0): Monitor0: Using hsync range of 30.00-130.00 kHz
(II) MTX(0): Monitor0: Using vrefresh range of 50.00-200.00 Hz
(II) MTX(0): Clock range: 12.00 to 164.00 MHz
(II) MTX(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) MTX(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) MTX(0): TV Standard : NTSC
(II) MTX(0): First X instance -
(II) MTX(0): Using Digital Output
(II) MTX(0): TV Standard : NTSC
(II) MTX(0): First X instance -
(II) MTX(0): Using Digital Output
(II) MTX(0): TV Standard : NTSC
(II) MTX(0): First X instance -
(II) MTX(0): Using Digital Output
(II) MTX(0): TV Standard : NTSC
(II) MTX(0): First X instance -
(II) MTX(0): Using Digital Output
(II) MTX(0): TV Standard : NTSC
(II) MTX(0): First X instance -
(II) MTX(0): Using Digital Output
(==) MTX(0): DPI set to (75, 75)
(II) MTX(0): TV Standard : NTSC
(II) MTX(0): First X instance -
(II) MTX(0): Using Digital Output
(--) MTX(0): Virtual size is 1600x1200 (pitch 2048)
(**) MTX(0): *Default mode "1600x1200": 162.0 MHz, 75.0 kHz, 60.0 Hz
(II) MTX(0): Modeline "1600x1200" 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
(**) MTX(0): *Default mode "1280x1024": 157.5 MHz, 91.1 kHz, 85.0 Hz
(II) MTX(0): Modeline "1280x1024" 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
(**) MTX(0): *Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) MTX(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
(**) MTX(0): *Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) MTX(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync
(**) MTX(0): *Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) MTX(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync
(II) MTX(0): Total Memory for Onscreen and Offscreen : 0xafc800
(II) MTX(0): Cursor Offset at 0x00000000
(II) MTX(0): Cursor Aperture at 0x00000000
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(WW) MTX(0): Error #3 while loading Kernel Driver.
(WW) MTX(0): Falling back to Emulating DMA
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.7
(II) MTX(0): Emulated Busmastering
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Reloading /usr/X11R6/lib/modules/libvgahw.a
(II) MTX(1): MGA instIndex = 1
(--) MTX(1): Linear framebuffer at 0xC0000000
(--) MTX(1): MMIO registers at 0xD3000000
(==) MTX(1): BIOS at 0xC0000
(II) MTX(1): Device Id [0528] Subsys Id [1030]
(II) MTX(1): Device Name [Parhelia 256MB Dual DVI]
(**) MTX(1): Total Video RAM: 262144 kByte
(==) MTX(1): Write-combining range (0xd3000000,0x2000) was already clear
(==) MTX(1): Write-combining range (0xc0000000,0x10000000)
(**) MTX(1): Depth 24, (**) framebuffer bpp 32
(==) MTX(1): Default visual is TrueColor
(**) MTX(1): Depth 24, (**) framebuffer bpp 32
(==) MTX(1): Default visual is TrueColor
(==) MTX(1): RGB weight 888
(**) MTX(1): Option "HWcursor" "off"
(**) MTX(1): Option "Busmastering" "on"
(**) MTX(1): Option "DigitalScreen2" "on"
(II) MTX(1): Monitor Input Type = 2
(==) MTX(1): Using gamma correction (1.0, 1.0, 1.0)
(II) MTX(1): Acceleration is enabled
(WW) MTX(1): Using software cursor
(II) MTX(1): Forcing Digital Output
(II) MTX(1): Digital is available
(==) MTX(1): Min pixel clock is 12 MHz
(==) MTX(1): Max pixel clock is 164 MHz
(II) MTX(1): Monitor1: Using hsync range of 30.00-130.00 kHz
(II) MTX(1): Monitor1: Using vrefresh range of 50.00-200.00 Hz
(II) MTX(1): Clock range: 12.00 to 164.00 MHz
(II) MTX(1): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) MTX(1): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) MTX(1): TV Standard : NTSC
(II) MTX(1): Second X instance -
(II) MTX(1): Using Digital Output
(II) MTX(1): TV Standard : NTSC
(II) MTX(1): Second X instance -
(II) MTX(1): Using Digital Output
(II) MTX(1): TV Standard : NTSC
(II) MTX(1): Second X instance -
(II) MTX(1): Using Digital Output
(II) MTX(1): TV Standard : NTSC
(II) MTX(1): Second X instance -
(II) MTX(1): Using Digital Output
(II) MTX(1): TV Standard : NTSC
(II) MTX(1): Second X instance -
(II) MTX(1): Using Digital Output
(==) MTX(1): DPI set to (75, 75)
(II) MTX(1): TV Standard : NTSC
(II) MTX(1): Second X instance -
(II) MTX(1): Using Digital Output
(--) MTX(1): Virtual size is 1600x1200 (pitch 2048)
(**) MTX(1): *Default mode "1600x1200": 162.0 MHz, 75.0 kHz, 60.0 Hz
(II) MTX(1): Modeline "1600x1200" 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
(**) MTX(1): *Default mode "1280x1024": 157.5 MHz, 91.1 kHz, 85.0 Hz
(II) MTX(1): Modeline "1280x1024" 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
(**) MTX(1): *Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) MTX(1): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
(**) MTX(1): *Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) MTX(1): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync
(**) MTX(1): *Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) MTX(1): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync
(II) MTX(1): Total Memory for Onscreen and Offscreen : 0xafc800
(II) MTX(1): Cursor Offset at 0x00000000
(II) MTX(1): Cursor Aperture at 0x00000000
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Reloading /usr/X11R6/lib/modules/libramdac.a
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Reloading /usr/X11R6/lib/modules/libfb.a
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Reloading /usr/X11R6/lib/modules/libxaa.a
(II) MTX(1): Emulated Busmastering
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? Yes, I do.
(II) LoadModule: "rac"
(II) Loading /usr/X11R6/lib/modules/librac.a
(II) Module rac: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) resource ranges after preInit:
[0] 0 0 0xd3000000 - 0xd3001fff (0x2000) MX[B]
[1] 0 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B]
[2] 0 0 0xd3000000 - 0xd3001fff (0x2000) MX[B]
[3] 0 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B]
[4] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[5] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[6] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[7] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[8] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[9] -1 0 0xd2001000 - 0xd2001fff (0x1000) MX[B]E
[10] -1 0 0xd6001000 - 0xd6001fff (0x1000) MX[B]E
[11] -1 0 0xd6000000 - 0xd6000fff (0x1000) MX[B]E
[12] -1 0 0xd6002000 - 0xd6003fff (0x2000) MX[B]E
[13] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]EO
[14] -1 0 0xd3000000 - 0xd3001fff (0x2000) MX[B](B)
[15] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[16] -1 0 0xd2000000 - 0xd2000fff (0x1000) MX[B](B)
[17] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[18] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[19] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[21] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[22] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]E
[23] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]E
[24] -1 0 0x0000f000 - 0x0000f0ff (0x100) IX[B]E
[25] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]E
[26] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[27] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) MTX(0): Write-combining range (0xd3000000,0x2000) was already clear
(==) MTX(0): Write-combining range (0xc0000000,0x10000000)
(II) MTX(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) MTX(0): Write-combining range (0xa0000,0x10000) was already clear
(WW) MTX(0): Cannot stop features.
(II) MTX(0): TV Standard : NTSC
(II) MTX(0): First X instance -
(II) MTX(0): Using Digital Output
(WW) MTX(0): Error occured while starting the features.
(II) MTX(0): Cursor Aperture location 0x00e80000.
(II) MTX(0): Cursor Surface location 0x07f00000.
(II) MTX(0): Parhelia device started.
(II) MTX(0): TV Standard : NTSC
(II) MTX(0): First X instance -
(II) MTX(0): Using Digital Output
(==) MTX(0): Default visual is TrueColor
(II) MTX(0): Using 600 lines for offscreen memory.
(II) MTX(0): Memory manager initialized to (0,0) (1600,1800)
(II) MTX(0): Largest offscreen area available: 1600 x 600
(II) MTX(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Offscreen Pixmaps
Driver provided ScreenToScreenBitBlt replacement
Driver provided FillSolidRects replacement
Driver provided FillSolidSpans replacement
Driver provided WritePixmap replacement
Driver provided ReadPixmap replacement
Setting up tile and stipple cache:
24 128x128 slots
6 256x256 slots
(==) MTX(0): Backing store disabled
(==) MTX(0): Silken mouse enabled
(II) MTX(0): Using SW cursor
(**) Option "dpms"
(**) MTX(0): DPMS enabled
(==) RandR enabled
(==) MTX(1): Write-combining range (0xd3000000,0x2000) was already clear
(==) MTX(1): Write-combining range (0xc0000000,0x10000000) was already set
(II) MTX(1): vgaHWGetIOBase: hwp->IOBase is 0x03b0, hwp->PIOOffset is 0x0000
(WW) MTX(1): Cannot stop features.
(II) MTX(1): TV Standard : NTSC
(II) MTX(1): Second X instance -
(II) MTX(1): Using Digital Output
(WW) MTX(1): Error occured while starting the features.
(II) MTX(1): Cursor Aperture location 0x00e80000.
(II) MTX(1): Cursor Surface location 0x07f00000.
(II) MTX(1): Parhelia device started.
(II) MTX(1): TV Standard : NTSC
(II) MTX(1): Second X instance -
(II) MTX(1): Using Digital Output
(==) MTX(1): Default visual is TrueColor
(II) MTX(1): Using 600 lines for offscreen memory.
(II) MTX(1): Memory manager initialized to (0,0) (1600,1800)
(II) MTX(1): Largest offscreen area available: 1600 x 600
(II) MTX(1): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Offscreen Pixmaps
Driver provided ScreenToScreenBitBlt replacement
Driver provided FillSolidRects replacement
Driver provided FillSolidSpans replacement
Driver provided WritePixmap replacement
Driver provided ReadPixmap replacement
Setting up tile and stipple cache:
24 128x128 slots
6 256x256 slots
(==) MTX(1): Backing store disabled
(==) MTX(1): Silken mouse enabled
(II) MTX(1): Using SW cursor
(**) Option "dpms"
(**) MTX(1): DPMS enabled
(==) RandR enabled
Symbol __glXgetActiveScreen from module /usr/X11R6/lib/modules/extensions/libdri.a is unresolved!
Symbol __glXgetActiveScreen from module /usr/X11R6/lib/modules/extensions/libdri.a is unresolved!
(II) Entity 0 shares no resources
(II) Entity 1 shares no resources
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Option "CoreKeyboard"
(**) Microsoft_Natural: Core Keyboard
(**) Option "Protocol" "standard"
(**) Microsoft_Natural: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) Microsoft_Natural: XkbRules: "xfree86"
(**) Option "XkbModel" "pc105"
(**) Microsoft_Natural: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Microsoft_Natural: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Microsoft_Natural: CustomKeycodes disabled
(**) Option "Protocol" "Auto"
(**) Microsoft Intellimouse Explorer: Device: "/dev/sysmouse"
(**) Microsoft Intellimouse Explorer: Protocol: "Auto"
(**) Option "CorePointer"
(**) Microsoft Intellimouse Explorer: Core Pointer
(**) Option "Device" "/dev/sysmouse"
(**) Option "Buttons" "5"
(==) Microsoft Intellimouse Explorer: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Microsoft Intellimouse Explorer: ZAxisMapping: buttons 4 and 5
(**) Microsoft Intellimouse Explorer: Buttons: 5
(**) Option "Resolution" "1600"
(**) Microsoft Intellimouse Explorer: Resolution: 1600
(II) XINPUT: Adding extended input device "Microsoft Intellimouse Explorer" (type: MOUSE)
(II) XINPUT: Adding extended input device "Microsoft_Natural" (type: KEYBOARD)
(II) Microsoft Intellimouse Explorer: SetupAuto: hw.iftype is 4, hw.model is 0
(II) Microsoft Intellimouse Explorer: SetupAuto: protocol is SysMouse
Could not init font path element /usr/X11R6/lib/X11/fonts/Type1, removing from list!
Could not init font path element /usr/X11R6/lib/X11/fonts/URW, removing from list!
Could not init font path element /usr/X11R6/lib/X11/fonts/freefont, removing from list!
-------------- next part --------------
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen 0" 0 0
#Screen 1 "Screen 1" 1601 3200
# Screen "Display Merged"
#Screen "Screen 0" LeftOf "Screen 1"
Screen "Screen 1" LeftOf "Screen 0"
InputDevice "Microsoft_Natural" "CoreKeyboard"
InputDevice "Microsoft Intellimouse Explorer" "CorePointer"
#Option "TripleHead"
Option "Xinerama" "true"
EndSection
Section "ServerFlags"
# Option "Xinerama"
AllowMouseOpenFail
Option "NoPM"
Option "TvOut" "off"
EndSection
Section "Files"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/URW"
FontPath "/usr/X11R6/lib/X11/fonts/freefont"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
EndSection
Section "Module"
#Load "extmod"
#Load "glx"
Load "dri"
#Load "dbe"
# #Load "record"
# Load "xtrap"
# Load "type1"
# Load "freetype"
# Load "ddc"
# Load "GLcore"
# Load "vbe"
# Load "bitmap"
# Load "int10"
EndSection
Section "InputDevice"
Identifier "Microsoft_Natural"
Driver "kbd"
Option "AutoRepeat" "500 30"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbRules" "xfree86"
EndSection
Section "InputDevice"
Identifier "Microsoft Intellimouse Explorer"
Driver "mouse"
Option "Protocol" "Auto"
Option "Device" "/dev/sysmouse"
Option "Buttons" "5"
Option "ZAxisMapping" "4 5"
Option "Resolution" "1600"
Option "CursorShadow" "True"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "UltraSharp 2001FP LCD"
ModelName "Dell"
HorizSync 30.0 - 130.0
VertRefresh 50.0 - 200.0
Option "dpms"
#DisplaySize 1600 1200
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "UltraSharp 2001FP LCD"
ModelName "Dell"
HorizSync 30.0 - 130.0
VertRefresh 50.0 - 200.0
Option "dpms"
#DisplaySize 1600 1200
EndSection
#Section "Monitor"
# Identifier "Display Merged"
# VendorName "Dell"
# ModelName "UltraSharp 2001FP LCD"
# HorizSync 30.0 - 130.0
# VertRefresh 50.0 - 200.0
# Option "dpms"
# DisplaySize 1600 1200
#EndSection
Section "Device"
Identifier "Parhelia_256_0"
VendorName "Matrox Graphics, Inc."
Driver "mtx"
VideoRam 262144
Option "HWcursor" "off"
BusID "PCI:2:0:0"
Option "DPMS" "on"
Option "DigitalScreen1" "on"
#Option "DigitalScreen2" "on"
#Option "TripleHead"
#Option "Xinerama" "true"
Option "Busmastering" "on"
Screen 0
#Screen 1
EndSection
Section "Device"
Identifier "Parhelia_256_1"
VendorName "Matrox Graphics, Inc."
Driver "mtx"
VideoRam 262144
Option "HWcursor" "off"
BusID "PCI:2:0:0"
Option "DPMS" "on"
#Option "DigitalScreen1" "on"
Option "DigitalScreen2" "on"
#Option "TripleHead"
#Option "Xinerama" "true"
Option "Busmastering" "on"
#Screen 0
Screen 1
EndSection
Section "Screen"
Identifier "Screen 0"
Device "Parhelia_256_0"
Monitor "monitor0"
DefaultDepth 24
DefaultColorDepth 24
DefaultFbBpp 32
SubSection "Display"
Depth 8
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
#Modes "1920x1440" "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
#Modes "1920x1440" "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
#Modes "1920x1440" "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen 1"
Device "Parhelia_256_1"
Monitor "monitor1"
DefaultDepth 24
DefaultColorDepth 24
DefaultFbBpp 32
SubSection "Display"
Depth 8
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
#Modes "1920x1440" "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
#Modes "1920x1440" "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
#Modes "1920x1440" "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
# Section "Screen"
# Identifier "Display Merged"
# Device "Parhelia_256_0"
# Monitor "Display Merged"
# DefaultDepth 24
# DefaultFbBPP 32
# Option "Monitor1Position" "LeftOf"
# Option "MetaModes" "1600x1200-1600x1200 at 100Hz:1 1400x1050-1600x1200 1280x1024-1600x1200 1152x864-1600x1200 1024x768-1600x1200 800x600-1600x1200 640x480-1600x1200 1600x1200 "
# Option "Monitor1HSync" "30.0-130.0 "
# Option "Monitor2HSync" "30.0-130.0 "
# Option "Monitor1VRefresh" "50.0-200.0 "
# Option "Monitor2VRefresh" "50.0-200.0 "
# Option "MergedFB"
# SubSection "Display"
# Virtual 3200 1200
# Depth 24
# Modes "1600x1200" "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600" "640x480" "1600x1200 at 60Hz:1"
# EndSubSection
#EndSection
Section "DRI"
Group 0
#Group 438
Mode 0666
EndSection
More information about the freebsd-questions
mailing list