Qlogic ISP 2200, DL-380 and EVA 5000 SAN; how?

Morten Liebach m at mongers.org
Mon Feb 21 15:54:26 GMT 2005


I am trying to use a HP EVA 5000 SAN through a Qlogic ISP 2200 PCI FC-AL
Adapter on a HP DL-380 (dmesg inline at the end), and so far I've

The HBA is recognized as:
isp0: <Qlogic ISP 2200 PCI FC-AL Adapter> port 0x4000-0x40ff mem 0xf7ff0000-0xf7 ff0fff irq 10 at device 1.0 on pci6

I have tried with ispfw(4) both as a module and compiled in, with "options
ISP_TARGET_MODE" and without.

I need to run 'camcontrol rescan all' to see anything more than the
built in RAID, with ISP_TARGET_MODE and ispfw(4) compiled in.  After
running 'camcontrol rescan all' I get:

# camcontrol devlist -v 
scbus0 on ciss0 bus 0:
<COMPAQ RAID 1  VOLUME OK>         at scbus0 target 0 lun 0 (pass0,da0)
scbus1 on ciss0 bus 32:
scbus2 on ciss0 bus 33:
scbus3 on isp0 bus 0:
<COMPAQ HSV110 (C)COMPAQ 3020>     at scbus3 target 0 lun 0 (pass1)
<  >                               at scbus3 target -1 lun -1 ()
scbus-1 on xpt0 bus 0:
<  >                               at scbus-1 target -1 lun -1 (xpt0)

I've been trying to rescan 3:0:0 and 3:0:1 and various other
combinations.  The SAN should have the volume available at LUN 1,
according to our storage manager, but nothing is found there.

I expected getting a new da1 device and access the SAN through that, but
no joy so far.  I did get a da1 device without ispfw(4) and
ISP_TARGET_MODE in the kernel (but ispfw(4) loaded as a module, but I
found out the hard way (disklabeling and newfs'ing it) that that was
just another name for the da0 device.  Thank god for nightly full

So, what blindingly obvious thing am I missing here?

Have a nice day

Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.11-RELEASE #2: Mon Feb 21 13:51:58 CET 2005
    root at build01.telmore.dk:/usr/obj/usr/src/sys/TelmoreSANHBA
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 3189402584 Hz
CPU: Intel(R) Xeon(TM) CPU 3.20GHz (3189.40-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf25  Stepping = 5
  Hyperthreading: 2 logical CPUs
real memory  = 1073717248 (1048552K bytes)
avail memory = 1039577088 (1015212K bytes)
Preloaded elf kernel "kernel" at 0xc052d000.
Warning: Pentium 4 CPU: PSE disabled
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pci0: <ATI Mach64-GR graphics accelerator> at 3.0
pci0: <unknown card> (vendor=0x0e11, dev=0xb203) at 4.0 irq 3
pci0: <unknown card> (vendor=0x0e11, dev=0xb204) at 4.2 irq 5
isab0: <PCI to ISA bridge (vendor=1166 device=0201)> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks CSB5 ATA100 controller> port 0x2000-0x200f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ohci0: <OHCI (generic) USB controller> mem 0xf0ef0000-0xf0ef0fff irq 7 at device 15.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pcib1: <Host to PCI bridge> on motherboard
pci1: <PCI bus> on pcib1
ciss0: <Compaq Smart Array 5i> port 0x3000-0x30ff mem 0xf2cf0000-0xf2cf3fff,0xf2dc0000-0xf2dfffff irq 10 at device 3.0 on pci1
pcib2: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib2
bge0: <Broadcom BCM5703 Gigabit Ethernet, ASIC rev. 0x1002> mem 0xf2ef0000-0xf2efffff irq 11 at device 1.0 on pci2
bge0: Ethernet address: 00:11:0a:9d:e2:f3
miibus0: <MII bus> on bge0
brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge1: <Broadcom BCM5703 Gigabit Ethernet, ASIC rev. 0x1002> mem 0xf2ee0000-0xf2eeffff irq 15 at device 2.0 on pci2
bge1: Ethernet address: 00:11:0a:9d:e2:f2
miibus1: <MII bus> on bge1
brgphy1: <BCM5703 10/100/1000baseTX PHY> on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
pcib3: <Host to PCI bridge> on motherboard
pci3: <PCI bus> on pcib3
pcib4: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard
pci4: <PCI bus> on pcib4
pcib6: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard
pci6: <PCI bus> on pcib6
isp0: <Qlogic ISP 2200 PCI FC-AL Adapter> port 0x4000-0x40ff mem 0xf7ff0000-0xf7ff0fff irq 10 at device 1.0 on pci6
pci6: <unknown card> (vendor=0x0e11, dev=0xa0f7) at 30.0 irq 15
pcib5: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard
pci5: <PCI bus> on pcib5
pcib7: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard
pci7: <PCI bus> on pcib7
eisa0: <EISA bus> on motherboard
mainboard0: <CPQ0727 (System Board)> on eisa0 slot 0
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xcc000-0xcd7ff,0xee000-0xeffff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: parallel port not found.
isp0: port logout of iid 0
ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to accept, logging unlimited
ata0-slave: ATA identify retries exceeded
acd0: CDROM <COMPAQ CD-ROM SN-124> at ata0-master PIO4
pass1 at isp0 bus 0 target 0 lun 0
pass1: <COMPAQ HSV110 (C)COMPAQ 3020> Fixed Storage Array SCSI-2 device 
pass1: 100.000MB/s transfers, Tagged Queueing Enabled
da0 at ciss0 bus 0 target 0 lun 0
da0: <COMPAQ RAID 1  VOLUME OK> Fixed Direct Access SCSI-0 device 
da0: 135.168MB/s transfers
da0: 34727MB (71122560 512 byte sectors: 255H 32S/T 8716C)
Mounting root from ufs:/dev/da0s1a
bge0: gigabit link up


More information about the freebsd-questions mailing list