how to configure Xorg to run at 1280x1024
Gary Kline
kline at tao.thought.org
Sat Feb 5 15:17:40 PST 2005
People,
One of my larger servers has 5.3 and Xorg; I can't find the
right configuration setting for the display; so it runs at
its maximum: 1600x1200. This would be fine except that the
apps shake with tiny wavy lines. The driver may be pushing
things to their limit.
I've tried X -configure and Xorg -conf. Somehow or other
I've generated an xorg.conf in /etc/X11, but no luck in
changing the resolution. The closest I've come to having
things work with xorg.conf and startx is to see a blank/grey
screen--at 1600x1200. I have ctwm set up in /root and
/home/kline.
Modifying the Screen Section messes things up for some
reason. I finally *do* have xorg working with /etc/X11/xorg.conf
but only with the following commented:
###Section "Screen"
###Identifier "Screen0"
###Device "Card0"
###Monitor "Monitor0"
###DefaultDepth 8
###SubSection "Display"
###Viewport 0 0
###Depth 8
###Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x60
0" "640x480"
###EndSubSection
###EndSection
I'll append my current xorg.conf file and hope that somebody can
tell me how to tweak it so that my max-resolution is
1280x1024 rather than 1600x1200.
thanks in advance,
gary
--
Gary Kline kline at thought.org www.thought.org Public service Unix
//
// note this works OR xorg work *without* any configuration file at all
//
Section "ServerLayout"
Identifier "X.org Configured"
###Screen 0 "Screen0" 0 0
Screen "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/TTF/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection
Section "Module"
Load "extmod"
Load "glx"
Load "dri"
Load "dbe"
Load "record"
Load "xtrap"
Load "type1"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/sysmouse"
EndSection
###Section "Screen"
###Identifier "Screen0"
###Device "Card0"
###Monitor "Monitor0"
###DefaultDepth 8
###SubSection "Display"
###Viewport 0 0
###Depth 8
###Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
###EndSubSection
###EndSection
Section "Monitor"
#DisplaySize 360 270 # mm
Identifier "Monitor0"
VendorName "HTC"
ModelName "CM751"
### Uncomment if you don't want to default to DDC:
HorizSync 30.0 - 94.0
# HorizSync 0.0 - 0.0
VertRefresh 50.0 - 160.0
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "accel" # [<bool>]
#Option "crt_display" # [<bool>]
#Option "composite_sync" # [<bool>]
#Option "hw_cursor" # [<bool>]
#Option "linear" # [<bool>]
#Option "mmio_cache" # [<bool>]
#Option "test_mmio_cache" # [<bool>]
#Option "panel_display" # [<bool>]
#Option "probe_clocks" # [<bool>]
#Option "reference_clock" # <freq>
#Option "shadow_fb" # [<bool>]
#Option "sw_cursor" # [<bool>]
Identifier "Card0"
Driver "ati"
VendorName "ATI"
BoardName "3D Rage Pro AGP 1X/2X"
ChipSet "ati"
ChipId 0x4742
ChipRev 0x5c
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
More information about the freebsd-questions
mailing list