touchpad not recognized and USB mouse doesn't work ...

[Astrodog]

On Tue,  1 Feb 2005 05:35:24 +0200, dkouroun at cc.uoi.gr
<dkouroun at cc.uoi.gr> wrote:
> Dear FreeBSD users,
> Once more I am asking  your advice with a old Laptop
> I have. Pressario 1230. Nothing worked as fast as FreeBSD
> in that thing! It was amazing how quickly it booted when
> compared with SuSE or Windows. Help me to fix 2 things
> though so it becomes useful!
> 
> 1) In FreeBSD 4.10 there are no problems with the time;
>   the clock works fine. Unfortunately in 5.3 Release
>   you see the clock running instead one-by-one second
>   5-by-5 seconds. I do not know why! Any ideas?
> 
> 2) Both 4.9, 4.10, 5.0, 5.2.1, 5.3 Releases cannot
>   use the touchpad. The touchpad is invisible to them.
>   Even from the time when installation is perfomed! You
>   remember that you asked to test the mouse daemon
>   if there any non-usb mices during installation don't you?
>   In Linux the touchpad is recognized and works fine
>   and that is with all Fedora and SuSE versions.
> 
> 3) As an alternative to touchpad I am using a USB mouse.
>   But this only works under 5.3 Release. It can't work
>   with 4.10 or any of the 4.X series.
> 
> I did:
> #ls /dev/
> 
> and I saw the devices therein! Nowhere isnide /dev/ I could find
> /dev/psm0. Everything existed except /dev/psm0. Is it possible that
> for some reason it is assigned a wrong IRQ number and it conflicts
> with some other device? Undr Linux /dev/psm0 is /dev/psaux and it is
> assigned an IRQ number 12. I've attached my dmesg and my /etc/rc.conf.
> 
> # -- sysinstall generated deltas -- # Sun Dec 12 15:06:12 2004
> # Created: Sun Dec 12 15:06:12 2004
> # Enable network daemons for user convenience.
> # Please make all changes to this file, not to /etc/defaults/rc.conf.
> # This file now contains just the overrides from /etc/defaults/rc.conf.
> #defaultrouter="195.130.113.200"
> hostname="nevrologia"
> fconfig_ed1="inet 192.168.0.1"
> keyrate="fast"
> moused_enable="YES"
> sshd_enable="YES"
> usbd_enable="YES"
> font8x16="grfixed-8x16"
> keymap="keramida.el-iso"
> 
> Copyright (c) 1992-2004 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>        The Regents of the University of California. All rights reserved.
> FreeBSD 5.3-RELEASE #0: Fri Nov  5 04:19:18 UTC 2004
>    root at harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Cyrix GXm (26.23-MHz 586-class CPU)
>  Origin = "CyrixInstead"  Id = 0x540  DIR=0x3544  Stepping=3  Revision=5
> real memory  = 100663296 (96 MB)
> avail memory = 88834048 (84 MB)
> pnpbios: Bad PnP BIOS data checksum
> npx0: [FAST]
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> pcib0: <Host to PCI bridge> pcibus 0 on motherboard
> pir0: <PCI Interrupt Routing Table: 5 Entries> on motherboard
> pci0: <PCI bus> on pcib0
> cbb0: <TI1221 PCI-CardBus Bridge> at device 17.0 on pci0
> cardbus0: <CardBus bus> on cbb0
> pccard0: <16-bit PCCard bus> on cbb0
> cbb1: <TI1221 PCI-CardBus Bridge> at device 17.1 on pci0
> cardbus1: <CardBus bus> on cbb1
> pccard1: <16-bit PCCard bus> on cbb1
> isab0: <PCI-ISA bridge> port 0x5000-0x500f,0x4000-0x401f,0x3000-0x307f mem
> 0x40010000-0x40010fff at device 18.0 on pci0
> isa0: <ISA bus> on isab0
> ohci0: <OHCI (generic) USB controller> mem 0xfedfe000-0xfedfefff irq 9 at device
> 19.0 on pci0
> ohci0: [GIANT-LOCKED]
> usb0: OHCI version 1.0, legacy support
> usb0: <OHCI (generic) USB controller> on ohci0
> usb0: USB revision 1.0
> uhub0: (0x0e11) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhub1: Atmel product 0x3311, class 9/0, rev 1.00/3.00, addr 2
> uhub1: 4 ports with 4 removable, self powered
> pci0: <display, VGA> at device 20.0 (no driver attached)
> cpu0 on motherboard
> orm0: <ISA Option ROM> at iomem 0xc0000-0xc9fff on isa0
> pmtimer0 on isa0
> ata0 at port 0x3f6,0x1f0-0x1f7 irq 14 on isa0
> ata1 at port 0x376,0x170-0x177 irq 15 on isa0
> atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5 irq 6 drq 2 on isa0
> fdc0: [FAST]
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> ppc0: parallel port not found.
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio0: configured irq 4 not in bitmap of probed irqs 0
> sio0: port may not be enabled
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 8250 or not responding
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> Timecounter "TSC" frequency 26233012 Hz quality 800
> Timecounters tick every 10.000 msec
> ad0: 3100MB <FUJITSU MHA2032AT/8211> [6300/16/63] at ata0-master PIO4
> acd0: CDROM <TOSHIBA CD-ROM XM-1702BC/1261> at ata1-master PIO4
> ed1: <PCMCIA Ethernet Card> at port 0x300-0x31f irq 9 function 0 config 32 on
> pccard0
> ed1: [GIANT-LOCKED]
> ed1: Ethernet address: 00:a0:0c:12:74:2e
> ed1: if_start running deferred for Giant
> type NE2000 (16 bit)
> Mounting root from ufs:/dev/ad0s1a
> WARNING: /usr was not properly dismounted
> WARNING: /var was not properly dismounted
> 
> Any suggestions?
> 
> _______________________________________________
> freebsd-mobile at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
> To unsubscribe, send any mail to "freebsd-mobile-unsubscribe at freebsd.org"
> 

You might try 4.11 for some of this. re the mouse, Do you happen to
remember what its detected as under Windows (If you've ever tried
that... *shudder*)