dvd drive

Wed Dec 28 07:07:17 PST 2005

On 12/28/05, eoghan <freebsd at redry.net> wrote:
> On 28 Dec 2005, at 15:55, Tofik Suleymanov wrote:
>
> > eoghan wrote:
> >
> >> Hello
> >> Im wondering how to tell freeBSD about my 2 dvd drives. k3b
> >> automatically detects them but it hasnt found either.
> >> Thanks
> >> Eoghan
> >> _______________________________________________
> >> freebsd-questions at freebsd.org mailing list
> >> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> >> To unsubscribe, send any mail to "freebsd-questions-
> >> unsubscribe at freebsd.org"
> >>
> > Post your dmesg output here.
> >
>
> I have copied it below, thanks:
>
> Copyright (c) 1992-2005 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>          The Regents of the University of California. All rights
> reserved.
> FreeBSD 6.0-RELEASE #0: Sun Dec  4 17:43:10 UTC 2005
>      root at nathaniel:/usr/obj/usr/src/sys/GENERIC
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Pentium(R) 4 CPU 1400MHz (1395.76-MHz 686-class CPU)
>    Origin = "GenuineIntel"  Id = 0xf07  Stepping = 7
>
> Features=0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,
> CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
> real memory  = 402157568 (383 MB)
> avail memory = 384102400 (366 MB)
> npx0: [FAST]
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> acpi0: <DELL DIM 8100> on motherboard
> acpi0: Power Button (fixed)
> pci_link0: <ACPI PCI Link LNKA> irq 3 on acpi0
> pci_link1: <ACPI PCI Link LNKB> irq 10 on acpi0
> pci_link2: <ACPI PCI Link LNKC> irq 11 on acpi0
> pci_link3: <ACPI PCI Link LNKD> irq 11 on acpi0
> pci_link4: <ACPI PCI Link LNKE> on acpi0
> pci_link5: <ACPI PCI Link LNKF> on acpi0
> pci_link6: <ACPI PCI Link LNKG> on acpi0
> pci_link7: <ACPI PCI Link LNKH> irq 9 on acpi0
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
> cpu0: <ACPI CPU> on acpi0
> acpi_button0: <Power Button> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> agp0: <Intel 82850 host to AGP bridge> mem 0xe8000000-0xefffffff at
> device 0.0 on pci0
> pcib1: <PCI-PCI bridge> at device 1.0 on pci0
> pci1: <PCI bus> on pcib1
> pci1: <display, VGA> at device 0.0 (no driver attached)
> pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci2: <ACPI PCI bus> on pcib2
> fwohci0: <VIA Fire II (VT6306)> port 0xec80-0xecff mem
> 0xff1ff800-0xff1fffff irq 10 at device 8.0 on pci2
> fwohci0: OHCI version 1.0 (ROM=1)
> fwohci0: No. of Isochronous channels is 8.
> fwohci0: EUI64 00:11:06:00:00:99:d9:eb
> fwohci0: Phy 1394a available S400, 3 ports.
> fwohci0: Link S400, max_rec 2048 bytes.
> firewire0: <IEEE1394(FireWire) bus> on fwohci0
> fwe0: <Ethernet over FireWire> on firewire0
> if_fwe0: Fake Ethernet address: 02:11:06:99:d9:eb
> fwe0: Ethernet address: 02:11:06:99:d9:eb
> fwe0: if_start running deferred for Giant
> sbp0: <SBP-2/SCSI over FireWire> on firewire0
> fwohci0: Initiate bus reset
> fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
> firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
> firewire0: bus manager 0 (me)
> pci2: <multimedia, audio> at device 10.0 (no driver attached)
> pci2: <simple comms> at device 11.0 (no driver attached)
> xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xe880-0xe8ff mem
> 0xff1ff400-0xff1ff47f irq 11 at device 12.0 on pci2
> miibus0: <MII bus> on xl0
> ukphy0: <Generic IEEE 802.3u media interface> on miibus0
> ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> xl0: Ethernet address: 00:b0:d0:e7:e9:7d
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel ICH2 UDMA100 controller> port
> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
> ata0: <ATA channel 0> on atapci0
> ata1: <ATA channel 1> on atapci0
> uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port
> 0xff80-0xff9f irq 11 at device 31.2 on pci0
> uhci0: [GIANT-LOCKED]
> usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port
> 0xff60-0xff7f irq 9 at device 31.4 on pci0
> uhci1: [GIANT-LOCKED]
> usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
> usb1: USB revision 1.0
> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
> acpi0
> fdc0: [FAST]
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: [GIANT-LOCKED]
> psm0: model IntelliMouse, device ID 3
> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10
> on acpi0
> sio0: type 16550A
> ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7
> on acpi0
> ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/8 bytes threshold
> ppbus0: <Parallel port bus> on ppc0
> plip0: <PLIP network interface> on ppbus0
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> pmtimer0 on isa0
> orm0: <ISA Option ROMs> at iomem 0xc0000-0xca7ff,0xca800-0xcbfff on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
> isa0
> Timecounter "TSC" frequency 1395762544 Hz quality 800
> Timecounters tick every 1.000 msec
> ad0: FAILURE - SET_MULTI status=51<READY,DSC,ERROR> error=4<ABORTED>
> ad0: 19470MB <QUANTUM FIREBALLlct20 20 APL.0900> at ata0-master UDMA100
> ad1: 78167MB <Maxtor 4R080J0 RAMB1TU0> at ata0-slave UDMA100
> acd0: DVDROM <NEC DV-5800A/1.07> at ata1-master UDMA33
> acd1: DVDR <NEC DVD RW ND-3500AG/2.16> at ata1-slave UDMA33
> Trying to mount root from ufs:/dev/ad0s1a
>
> _______________________________________________
> freebsd-questions at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "freebsd-questions-unsubscribe at freebsd.org"
>

I can see that the drives have been detected as acd0 and acd1 and
everything seems to be working normally.

Can you describe your problem in more detail ?

Are you not able to mount a data cd-rom when then latter  is in the drive?

Have you created  mount points for your cd-rom drives e.g /cdrom and
/cdrom1 and tried mounting them ?

Roshan