Problem with printing-scanning..combo..

[Danny Pansters]

You probably want these (both are from HP ported from Linux):

/usr/ports/print/hpijs
/usr/ports/graphics/hpoj

The first has the foomatic drivers for optimal printing, the second includes 
scanning support. It's very well documented, our HP photosmart 2610 prints 
and scans fine from kde using cups and kooka.

In short: 

ptal-init setup
scanimage --list-devices

HTH,

Dan

On Wednesday 30 November 2005 20:17, Lucas Fol wrote:
> Welcome
>
> I own a HP PSC 1610 all-in-one. I've plugged it (USB) to my notebook
> (Acer TM 212 TX). The printing stuff goes ok. It prints well with cups
> and ulpt driver. The problem is with scanning. The BSD doesn't see the
> scanner. sane-find-scanner can't do do it. The uscanner module is
> compiled in kernel. That's the 6.0 Release of FreeBSD. I've tried to
> solve it for whole three days and i still don't get it.
> That's my dmesg:
>
> Copyright (c) 1992-2005 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>         The Regents of the University of California. All rights
> reserved.
> FreeBSD 6.0-RELEASE #0: Sun Nov 27 17:33:48 CET 2005
>     lucas at lucas:/usr/src/sys/i386/compile/A-GENERIC
> module nfslock already present!
> module_register: module uhub/uhid already exists!
> Module uhub/uhid failed to register: 17
> module_register: module pci/rl already exists!
> Module pci/rl failed to register: 17
> module_register: module cardbus/rl already exists!
> Module cardbus/rl failed to register: 17
> module_register: module rl/miibus already exists!
> Module rl/miibus failed to register: 17
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel Celeron (797.05-MHz 686-class CPU)
>   Origin = "GenuineIntel"  Id = 0x68a  Stepping = 10
>
> Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV
>,PAT,PSE36,MMX,FXSR,SSE> real memory  = 259981312 (247 MB)
> avail memory = 240738304 (229 MB)
> npx0: [FAST]
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> acpi0: <Acer FALCON2M> on motherboard
> acpi0: Power Button (fixed)
> pci_link0: <ACPI PCI Link PILA> irq 11 on acpi0
> pci_link1: <ACPI PCI Link PILB> irq 11 on acpi0
> pci_link2: <ACPI PCI Link PILC> irq 10 on acpi0
> pci_link3: <ACPI PCI Link PILD> irq 11 on acpi0
> pci_link4: <ACPI PCI Link PILE> on acpi0
> pci_link5: <ACPI PCI Link PILF> on acpi0
> pci_link6: <ACPI PCI Link PILG> irq 10 on acpi0
> pci_link7: <ACPI PCI Link PILH> irq 10 on acpi0
> pci_link8: <ACPI PCI Link PILI> irq 11 on acpi0
> acpi_ec0: <Embedded Controller: GPE 0x22> port 0x62,0x66 on acpi0
> Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
> acpi_timer0: <32-bit timer at 3.579545MHz> port 0xf108-0xf10b on acpi0
> cpu0: <ACPI CPU> on acpi0
> acpi_button0: <Sleep Button> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib0: no PRT entry for 0.16.INTAagp0: <Ali M1621 host to AGP bridge>
> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
> pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> pci1: <display, VGA> at device 0.0 (no driver attached)
> pcm0: <Acer Labs M5451> port 0x8000-0x80ff mem 0x81a00000-0x81a00fff irq
> 10 at device 6.0 on pci0
> pcm0: <Cirrus Logic CS4299 AC97 Codec>
> pcm0: [GIANT-LOCKED]
> isab0: <PCI-ISA bridge> at device 7.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <AcerLabs M5229 UDMA66 controller> port
> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x7050-0x705f irq 15 at device 16.0
> on pci0
> atapci0: using PIO transfers above 137GB as workaround for 48bit DMA
> access bug, expect reduced performance
> ata0: <ATA channel 0> on atapci0
> ata1: <ATA channel 1> on atapci0
> pci0: <bridge> at device 17.0 (no driver attached)
> cbb0: <O2Micro OZ6812/6872 PCI-CardBus Bridge> irq 11 at device 19.0 on
> pci0
> cardbus0: <CardBus bus> on cbb0
> pccard0: <16-bit PCCard bus> on cbb0
> ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem
> 0x81c00000-0x81c00fff irq 11 at device 20.0 on pci0
> ohci0: [GIANT-LOCKED]
> usb0: OHCI version 1.0, legacy support
> usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
> usb0: USB revision 1.0
> uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> acpi_lid0: <Control Method Lid Switch> on acpi0
> acpi_acad0: <AC Adapter> on acpi0
> battery0: <ACPI Control Method Battery> on acpi0
> acpi_tz0: <Thermal Zone> on acpi0
> fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
> acpi0
> fdc0: [FAST]
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
> acpi0
> sio0: type 16550A
> ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
> ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
> ppbus0: <Parallel port bus> on ppc0
> plip0: <PLIP network interface> on ppbus0
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: [GIANT-LOCKED]
> psm0: model Generic PS/2 mouse, device ID 0
> pmtimer0 on isa0
> orm0: <ISA Option ROM> at iomem 0xc0000-0xcbfff on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
> isa0
> ulpt0: HP PSC 1600 series, rev 2.00/1.00, addr 2, iclass 255/204
> ulpt0: using bi-directional mode
> umass0: HP PSC 1600 series, rev 2.00/1.00, addr 2
> Timecounter "TSC" frequency 797050193 Hz quality 800
> Timecounters tick every 1.000 msec
> rl0: <RealTek 8139 10/100BaseTX> port 0x1100-0x11ff mem
> 0x88000000-0x880001ff irq 11 at device 0.0 on cardbus0
> miibus0: <MII bus> on rl0
> rlphy0: <RealTek internal media interface> on miibus0
> rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> rl0: Ethernet address: 00:50:fc:b9:8a:30
> ad0: 9590MB <TOSHIBA MK1016GAP U1.14 A> at ata0-master UDMA66
> acd0: CDRW <HL-DT-STCD-RW/DVD DRIVE GCC-4241N/0H33> at ata1-slave UDMA33
> acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
> error=4<ABORTED>
> acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
> error=4<ABORTED>
> acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
> error=4<ABORTED>
> acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
> error=4<ABORTED>
> acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
> error=4<ABORTED>
> acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
> error=4<ABORTED>
> acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
> error=4<ABORTED>
> acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
> error=4<ABORTED>
> cd0 at ata1 bus 0 target 1 lun 0
> cd0: <HL-DT-ST RW/DVD GCC-4241N 0H33> Removable CD-ROM SCSI-0 device
> cd0: 33.000MB/s transfers
> cd0: cd present [80250 x 2048 byte records]
> da0 at umass-sim0 bus 0 target 0 lun 0
> da0: <HP PSC 1610 1.00> Removable Direct Access SCSI-2 device
> da0: 1.000MB/s transfers
> da0: Attempt to query device size failed: NOT READY, Medium not present
> (cd0:ata1:0:1:0): READ(10). CDB: 28 0 0 0 0 0 0 0 1 0
> (cd0:ata1:0:1:0): CAM Status: SCSI Status Error
> (cd0:ata1:0:1:0): SCSI Status: Check Condition
> (cd0:ata1:0:1:0): ILLEGAL REQUEST asc:64,0
> (cd0:ata1:0:1:0): Illegal mode for this track
> (cd0:ata1:0:1:0): Unretryable error
> (cd0:ata1:0:1:0): cddone: got error 0x6 back
> (cd0:ata1:0:1:0): READ(10). CDB: 28 0 0 0 0 1 0 0 1 0
> (cd0:ata1:0:1:0): CAM Status: SCSI Status Error
> (cd0:ata1:0:1:0): SCSI Status: Check Condition
> (cd0:ata1:0:1:0): ILLEGAL REQUEST asc:64,0
> (cd0:ata1:0:1:0): Illegal mode for this track
> (cd0:ata1:0:1:0): Unretryable error
> (cd0:ata1:0:1:0): cddone: got error 0x6 back
> (cd0:ata1:0:1:0): READ(10). CDB: 28 0 0 0 0 0 0 0 1 0
> (cd0:ata1:0:1:0): CAM Status: SCSI Status Error
> (cd0:ata1:0:1:0): SCSI Status: Check Condition
> (cd0:ata1:0:1:0): ILLEGAL REQUEST asc:64,0
> (cd0:ata1:0:1:0): Illegal mode for this track
> (cd0:ata1:0:1:0): Unretryable error
> (cd0:ata1:0:1:0): cddone: got error 0x6 back
> (cd0:ata1:0:1:0): READ(10). CDB: 28 0 0 0 0 0 0 0 2 0
> (cd0:ata1:0:1:0): CAM Status: SCSI Status Error
> (cd0:ata1:0:1:0): SCSI Status: Check Condition
> (cd0:ata1:0:1:0): ILLEGAL REQUEST asc:64,0
> (cd0:ata1:0:1:0): Illegal mode for this track
> (cd0:ata1:0:1:0): Unretryable error
> (cd0:ata1:0:1:0): cddone: got error 0x6 back
> (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
> (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (da0:umass-sim0:0:0:0): SCSI Status: Check Condition
> (da0:umass-sim0:0:0:0): NOT READY asc:3a,0
> (da0:umass-sim0:0:0:0): Medium not present
> (da0:umass-sim0:0:0:0): Unretryable error
> Opened disk da0 -> 6
> (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
> (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (da0:umass-sim0:0:0:0): SCSI Status: Check Condition
> (da0:umass-sim0:0:0:0): NOT READY asc:3a,0
> (da0:umass-sim0:0:0:0): Medium not present
> (da0:umass-sim0:0:0:0): Unretryable error
> Opened disk da0 -> 6
> (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
> (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (da0:umass-sim0:0:0:0): SCSI Status: Check Condition
> (da0:umass-sim0:0:0:0): NOT READY asc:3a,0
> (da0:umass-sim0:0:0:0): Medium not present
> (da0:umass-sim0:0:0:0): Unretryable error
> Opened disk da0 -> 6
> Trying to mount root from ufs:/dev/ad0s1a
>
> Maybe the scanner is wrongfully attached? I don't know.
> I would really appreciate if you help me .
>
> Łukasz Foluśniak
>
> _______________________________________________
> freebsd-questions at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to
> "freebsd-questions-unsubscribe at freebsd.org"