Problem with burning CD-DAs

[Fabian Keil]

Stevan Tiefert <stevan.tiefert at freenet.de> wrote:

> Am Donnerstag, 1. Dezember 2005 14:25 schrieb Fabian Keil:
> > Stevan Tiefert <stevan.tiefert at freenet.de> wrote:
> > > Fabian Keil schrieb:
> > > > Stevan Tiefert <stevan.tiefert at freenet.de> wrote:
> > > >>Fabian Keil schrieb:
> > > >>>Stevan Tiefert <stevan.tiefert at freenet.de> wrote:
> > > >>>>I can rip without problems a CD-DA to a wav-file (cdda2wav). I
> > > >>>>played this file in a wav-player without problems. When I burn
> > > >>>>these wav-files with cdrecord to a CD-R and then play this
> > > >>>>CD-R on a CD-Player I hear the songs but with a disturbing
> > > >>>>rushing! No klicks! I hear the song with a rush like a storm!
> > > >>>>All Audio-Tracks, the whole CD, rushing!
> > > >>>
> > > >>>Did you check with readcd -c2scan if the burned disc is c2
> > > >>>error free?
> > > >>>
> > > >>>If you rip the burned disc with cdda2wav -paranoia, do you get
> > > >>>any suspicious error messages? Do the ripped wavs still have
> > > >>>the problems you described?

> > > >>With:
> > > >>cdda2wav -v255 -D3,0,0 -B -Owav -paranoia
> > > >>I got 60 % korrekt read *.wav-files the others have minor
> > > >>problems, rereads and so on...

> > > Third, the output of "readcd dev=1,0,0 -c2scan":
> > >
> > > Read speed: 5645 kB/s (CD 32x, DVD 4x).
> > > Write speed: 1411 kB/s (CD 8x, DVD 1x).
> > > Capacity: 198010 Blocks = 396020 kBytes = 386 MBytes = 405 prMB
> > > Sectorsize: 2048 Bytes
> > > Copy from SCSI (1,0,0) disk to file ´/dev/null´
> > > end: 198010
> > > addr: 198010 cnt: 10
> > > Time total: 225.993sec
> > > Read 511654.75 kB at 2264.0 kB/sec.
> > > Total of 0 hard read errors.
> > > C2 errors total: 0 bytes in 0 sectors on disk
> > > C2 errors rate: 0.000000%
> > > C2 errors on worst sector: 0, sectors with 100+ C2 errors: 0
> >
> > If you try cdda2wav -B dev=1,0,0 -paranoia, do you get
> > as bad results as with 3,0,0?
> >
> > What is the result of readcd dev=3,0,0 -c2scan?

> When I used dev=3,0,0 the CD-RW was connected on a
> PCI-EIDE-Host-Adapter. I thought that the chipset of my mainboard
> don't support any correct writing of CD-DAs. But the EIDE-Controller
> of the mainboard and the Host-Adapter do have both the same
> results... dev=1,0,0 is the same CD-RW connected on the mainboard.

It is strange, that your drive can read the disc without c2 errors,
but you still don't get clean results with cdda2wav.

Do you have any scratched discs to try if c2 errors are reported
correctly by the drive?

Also please post the complete cdda2wav output.

Fabian
-- 
http://www.fabiankeil.de/
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 187 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-questions/attachments/20051201/ed521b05/signature.bin