UPDATING on AMD Processor

[Odhiambo Washington]

PS: I asked this Q stupidly before... No wonder I did not
get any responses ;)


 When it comes to the Intel platform, I can always find my way around,
 but in this one case of AMD, I am purely clueless. I don't even know
 what keyword to search for in the handbook, FAQ, google.
 
 Attached you will find the dmesg output of an oldish box on which I
 just installed FreeBSD 5.x, and I would like to:
 
 make buildworld
 make kernel
 make installworld
 
 I want to use this box as a firewall on my network. Can someone
 please point me to the relevant documentation that will guide me
 in the above process.


-Wash

http://www.netmeister.org/news/learn2quote.html

--
+======================================================================+
    |\      _,,,---,,_     | Odhiambo Washington    <wash at wananchi.com>
Zzz /,`.-'`'    -.  ;-;;,_ | Wananchi Online Ltd.   www.wananchi.com
   |,4-  ) )-,_. ,\ (  `'-'| Tel: +254 20 313985-9  +254 20 313922
  '---''(_/--'  `-'\_)     | GSM: +254 722 743223   +254 733 744121
+======================================================================+
	WARNING TO ALL PERSONNEL:

Firings will continue until morale improves.
-------------- next part --------------
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.3-RC2 #0: Sun Oct 31 08:32:33 UTC 2004
    root at harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD-K6(tm) 3D processor (451.03-MHz 586-class CPU)
  Origin = "AuthenticAMD"  Id = 0x58c  Stepping = 12
  Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
  AMD Features=0x80000800<SYSCALL,3DNow!>
real memory  = 134217728 (128 MB)
avail memory = 121696256 (116 MB)
K6-family MTRR support enabled (2 registers)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 8 Entries> on motherboard
pci0: <PCI bus> on pcib0
$PIR: No matching entry for 0.7.INTD
agp0: <VIA 82C597 (Apollo VP3) host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
$PIR: ROUTE_INTERRUPT failed.
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C586B UDMA33 controller> port 0xe800-0xe80f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xe000-0xe01f irq 10 at device 7.2 on pci0
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
rl0: <RealTek 8139 10/100BaseTX> port 0xe400-0xe4ff mem 0xe6100000-0xe61000ff irq 9 at device 12.0 on pci0
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:e0:4c:45:0c:c4
pcib2: <PCI-PCI bridge> at device 19.0 on pci0
pci2: <PCI bus> on pcib2
$PIR: ROUTE_INTERRUPT failed.
$PIR: ROUTE_INTERRUPT failed.
$PIR: ROUTE_INTERRUPT failed.
vr0: <VIA VT6105M Rhine III 10/100BaseTX> port 0xd000-0xd0ff mem 0xe6000000-0xe60000ff irq 12 at device 8.0 on pci2
miibus1: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus1
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:0c:42:02:16:27
vr1: <VIA VT6105M Rhine III 10/100BaseTX> port 0xd400-0xd4ff mem 0xe6001000-0xe60010ff irq 5 at device 9.0 on pci2
miibus2: <MII bus> on vr1
ukphy1: <Generic IEEE 802.3u media interface> on miibus2
ukphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr1: Ethernet address: 00:0c:42:02:16:28
vr2: <VIA VT6105M Rhine III 10/100BaseTX> port 0xd800-0xd8ff mem 0xe6002000-0xe60020ff irq 11 at device 10.0 on pci2
miibus3: <MII bus> on vr2
ukphy2: <Generic IEEE 802.3u media interface> on miibus3
ukphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr2: Ethernet address: 00:0c:42:02:16:29
vr3: <VIA VT6105M Rhine III 10/100BaseTX> port 0xdc00-0xdcff mem 0xe6003000-0xe60030ff irq 9 at device 11.0 on pci2
miibus4: <MII bus> on vr3
ukphy3: <Generic IEEE 802.3u media interface> on miibus4
ukphy3:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr3: Ethernet address: 00:0c:42:02:16:2a
cpu0 on motherboard
orm0: <ISA Option ROM> at iomem 0xc0000-0xcbfff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0400> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
Timecounter "TSC" frequency 451025199 Hz quality 800
Timecounters tick every 10.000 msec
ad0: 9641MB <QUANTUM FIREBALLlct10 10/A03.0900> [19590/16/63] at ata0-master UDMA33
Mounting root from ufs:/dev/ad0s1a