hi Guys please look at my dmesg output

Thu Apr 21 05:25:39 PDT 2005

Here it is, I got them when I buildworld, there must be something wrong, and my sound card does not work any more..... so please just look at them and give me some advise. 

%dmesg | more 
Waiting (max 60 seconds) for system process `vnlru' to stop...done 
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done 
Waiting (max 60 seconds) for system process `syncer' to stop... 
Syncing disks, vnodes remaining...1 1 1 1 0 0 done 
No buffers busy after final sync 
Uptime: 7m16s 
Rebooting... 
Copyright (c) 1992-2005 The FreeBSD Project. 
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 
The Regents of the University of California. All rights reserved. 
FreeBSD 5.4-STABLE #1: Sat Apr 9 08:05:30 UTC 2005 
 <mailto:root at FreeBSD.JSARMY.NET> root at FreeBSD.JSARMY.NET:/usr/obj/usr/src/sys/MYKERN 
Timecounter "i8254" frequency 1193182 Hz quality 0 
CPU: Intel Celeron (701.59-MHz 686-class CPU) 
Origin = "GenuineIntel" Id = 0x686 Stepping = 6 
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PA 
T,PSE36,MMX,FXSR,SSE> 
real memory = 201244672 (191 MB) 
avail memory = 191463424 (182 MB) 
npx0: <math processor> on motherboard 
npx0: INT 16 interface 
cpu0 on motherboard 
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> pcibus 0 on motherboard 
pir0: <PCI Interrupt Routing Table: 9 Entries> on motherboard 
pci0: <PCI bus> on pcib0 
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xe0000000-0xe3ffffff at d 
evice 0.0 on pci0 
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0 
pci1: <PCI bus> on pcib1 
pci1: <display, VGA> at device 0.0 (no driver attached) 
cbb0: <TI1420 PCI-CardBus Bridge> irq 11 at device 3.0 on pci0 
cardbus0: <CardBus bus> on cbb0 
pccard0: <16-bit PCCard bus> on cbb0 
cbb1: <TI1420 PCI-CardBus Bridge> irq 11 at device 3.1 on pci0 
cardbus1: <CardBus bus> on cbb1 
pccard1: <16-bit PCCard bus> on cbb1 
isab0: <PCI-ISA bridge> at device 7.0 on pci0 
isa0: <ISA bus> on isab0 
atapci0: <Intel PIIX4 UDMA33 controller> port 0x860-0x86f,0x376,0x170-0x177,0x3f 
6,0x1f0-0x1f7 at device 7.1 on pci0 
ata0: channel #0 on atapci0 
ata1: channel #1 on atapci0 
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xdce0-0xdcff irq 11 at de 
vice 7.2 on pci0 
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 
usb0: USB revision 1.0 
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 
uhub0: 2 ports with 2 removable, self powered 
pci0: <bridge> at device 7.3 (no driver attached) 
pcm0: <ESS Technology Maestro3> port 0xd800-0xd8ff mem 0xfbffe000-0xfbffffff irq 
5 at device 8.0 on pci0 
pcm0: failed: rid 0x10 is ioport, requested 3 
pcm0: <SigmaTel STAC9721/23 AC97 Codec> 
pci0: <simple comms> at device 16.0 (no driver attached) 
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0 
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 
atkbd0: <AT Keyboard> irq 1 on atkbdc0 
kbd0 at atkbd0 
psm0: <PS/2 Mouse> irq 12 on atkbdc0 
psm0: model IntelliMouse, device ID 3 
sc0: <System console> at flags 0x100 on isa0 
sc0: VGA <16 virtual consoles, flags=0x300> 
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 
unknown: <PNP0c01> can't assign resources (port) 
unknown: <PNP0303> can't assign resources (port) 
unknown: <PNP0f13> can't assign resources (irq) 
unknown: <PNP0e03> can't assign resources (irq)Timecounter "TSC" frequency 701592867 Hz quality 800 
Timecounters tick every 10.000 msec 
rl0: <RealTek 8139 10/100BaseTX> port 0x1000-0x10ff mem 0x88000000-0x880001ff ir 
q 11 at device 0.0 on cardbus1 
miibus0: <MII bus> on rl0 
rlphy0: <RealTek internal media interface> on miibus0 
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto 
rl0: Ethernet address: 00:50:22:00:0f:e2 
ad0: 19077MB <ST92011A/3.04> [38760/16/63] at ata0-master UDMA33 
acd0: CDROM <TEAC CD-ROM CD-224E/3.7C> at ata1-master PIO4 
Mounting root from ufs:/dev/ad0s1a 
Waiting (max 60 seconds) for system process `vnlru' to stop...done 
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done 
Waiting (max 60 seconds) for system process `syncer' to stop... 
Syncing disks, vnodes remaining...1 0 0 0 done 
No buffers busy after final sync 
Uptime: 1m46s 
Rebooting... 
Copyright (c) 1992-2005 The FreeBSD Project. 
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 
The Regents of the University of California. All rights reserved. 
FreeBSD 5.4-STABLE #1: Sat Apr 9 08:05:30 UTC 2005 
 <mailto:root at FreeBSD.JSARMY.NET> root at FreeBSD.JSARMY.NET:/usr/obj/usr/src/sys/MYKERN 
Timecounter "i8254" frequency 1193182 Hz quality 0 
CPU: Intel Celeron (701.59-MHz 686-class CPU) 
Origin = "GenuineIntel" Id = 0x686 Stepping = 6 
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PA 
T,PSE36,MMX,FXSR,SSE> 
...skipping... 
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 
atkbd0: <AT Keyboard> irq 1 on atkbdc0 
kbd0 at atkbd0 
psm0: <PS/2 Mouse> irq 12 on atkbdc0 
psm0: model IntelliMouse, device ID 3 
sc0: <System console> at flags 0x100 on isa0 
sc0: VGA <16 virtual consoles, flags=0x300> 
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 
unknown: <PNP0c01> can't assign resources (port) 
unknown: <PNP0303> can't assign resources (port) 
unknown: <PNP0f13> can't assign resources (irq) 
unknown: <PNP0e03> can't assign resources (irq) 
Timecounter "TSC" frequency 701593882 Hz quality 800 
Timecounters tick every 10.000 msec 
rl0: <RealTek 8139 10/100BaseTX> port 0x1000-0x10ff mem 0x88000000-0x880001ff ir 
q 11 at device 0.0 on cardbus1 
miibus0: <MII bus> on rl0 
rlphy0: <RealTek internal media interface> on miibus0 
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto 
rl0: Ethernet address: 00:50:22:00:0f:e2 
ad0: 19077MB <ST92011A/3.04> [38760/16/63] at ata0-master UDMA33 
acd0: CDROM <TEAC CD-ROM CD-224E/3.7C> at ata1-master PIO4 
Mounting root from ufs:/dev/ad0s1a 
....

my kernel configure is here:

machine i386 
#cpu I486_CPU 
cpu I586_CPU 
cpu I686_CPU 
ident GENERIC 

# To statically compile in device wiring instead of /boot/device.hints 
#hints "GENERIC.hints" # Default places to look for devices. 

options SCHED_4BSD # 4BSD scheduler 
options INET # InterNETworking 
#options INET6 # IPv6 communications protocols 
options FFS # Berkeley Fast Filesystem 
options SOFTUPDATES # Enable FFS soft updates support 
options UFS_ACL # Support for access control lists 
options UFS_DIRHASH # Improve performance on big directories 
options MD_ROOT # MD is a potential root device 
#options NFSCLIENT # Network Filesystem Client 
#options NFSSERVER # Network Filesystem Server 
#options NFS_ROOT # NFS usable as /, requires NFSCLIENT 
options MSDOSFS # MSDOS Filesystem 
options CD9660 # ISO 9660 Filesystem 
options PROCFS # Process filesystem (requires PSEUDOFS) 
options PSEUDOFS # Pseudo-filesystem framework 
options GEOM_GPT # GUID Partition Tables. 
options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] 
options COMPAT_FREEBSD4 # Compatible with FreeBSD4 
options SCSI_DELAY=15000 # Delay (in ms) before probing SCSI 
options KTRACE # ktrace(1) support 
options SYSVSHM # SYSV-style shared memory 
options SYSVMSG # SYSV-style message queues 
options SYSVSEM # SYSV-style semaphores 
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions 
options KBD_INSTALL_CDEV # install a CDEV entry in /dev 
options AHC_REG_PRETTY_PRINT # Print register bitfields in debug 
# output. Adds ~128k to driver. 
options AHD_REG_PRETTY_PRINT # Print register bitfields in debug 
# output. Adds ~215k to driver. 
options ADAPTIVE_GIANT # Giant mutex is adaptive. 

device apic # I/O APIC 

# Bus support. Do not remove isa, even if you have no isa slots 
device isa 
device eisa 
device pci 

# Floppy drives 
#device fdc 

# ATA and ATAPI devices 
device ata 
device atadisk # ATA disk drives 
#device ataraid # ATA RAID drives 
device atapicd # ATAPI CDROM drives 
#device atapifd # ATAPI floppy drives 
#device atapist # ATAPI tape drives 
options ATA_STATIC_ID # Static device numbering 

# SCSI Controllers 

# atkbdc0 controls both the keyboard and the PS/2 mouse 
device atkbdc # AT keyboard controller 
device atkbd # AT keyboard 
device psm # PS/2 mouse 

device vga # VGA video card driver 

device splash # Splash screen and screen saver support 

# syscons is the default console driver, resembling an SCO console 
device sc 

# Enable this for the pcvt (VT220 compatible) console driver 
#device vt 
#options XSERVER # support for X server on a vt console 
#options FAT_CURSOR # start with block cursor 

device agp # support several AGP chipsets 

# Floating point support - do not disable. 
device npx 

# Power management support (see NOTES for more options) 
#device apm 
# Add suspend/resume support for the i8254. 
#device pmtimer 

# PCCARD (PCMCIA) support 
# PCMCIA and cardbus bridge support 
device cbb # cardbus (yenta) bridge 
device pccard # PC Card (16-bit) bus 
device cardbus # CardBus (32-bit) bus 

# If you've got a "dumb" serial or parallel PCI card that is 
# supported by the puc(4) glue driver, uncomment the following 
# line to enable it (connects to the sio and/or ppc drivers): 
#device puc 

# PCI Ethernet NICs. 

# PCI Ethernet NICs that use the common MII bus controller code. 
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! 
device miibus # MII bus support 

device re # RealTek 8139C+/8169/8169S/8110S 
device rl # RealTek 8129/8139 

# Pseudo devices. 
device loop # Network loopback 
device mem # Memory and kernel memory devices 
device io # I/O device 
device random # Entropy device 
device ether # Ethernet support 
device sl # Kernel SLIP 
device ppp # Kernel PPP 
device tun # Packet tunnel. 
device pty # Pseudo-ttys (telnet etc) 
device md # Memory "disks" 
device gif # IPv6 and IPv4 tunneling 
device faith # IPv6-to-IPv4 relaying (translation) 

# The `bpf' device enables the Berkeley Packet Filter. 
# Be aware of the administrative consequences of enabling this! 
device bpf # Berkeley packet filter 

# USB support 
device uhci # UHCI PCI->USB interface 
device ohci # OHCI PCI->USB interface 
device usb # USB Bus (required) 
#device udbp # USB Double Bulk Pipe devices 
device ugen # Generic 
device uhid # "Human Interface Devices" 
device ukbd # Keyboard 
device ulpt # Printer 
#device umass # Disks/Mass storage - Requires scbus and da 
device ums # Mouse 
#device urio # Diamond Rio 500 MP3 player 
#device uscanner # Scanners 
# USB Ethernet, requires mii 

device rue # RealTek RTL8150 USB Ethernet 

# FireWire support 
device sound #sound support