DVD burner error

Wed Nov 24 15:05:15 PST 2004

On Wed, Nov 24, 2004 at 11:27:03PM +0200, Edvard Fagerholm wrote:
> Hello!
> 
> I get sometimes the following error when I burn DVDs. Actually it happens
> more often than not... When burning a DVD with growisofs, burning stops with
> the following message:
> 
> acd0 WARNING - removed from configuration
> :-( unable to WRITE at LBA=fb150h: Input/output error
> builtin_dd: 1028432*2KB out @ average 3.5x1385KBps
> :-( write failed: Input/output error
> /dev/pass0: flushing cache
> (cd0:ata1:0:0:0): lost device
> (probe0:ata1:0:0:0): Lost target 0???
> :-( unable to FLUSH CACHE: Input/output error
> :-( unable to SYNCHRONOUS FLUSH CACHE: Input/output error
> (cd0:ata1:0:0:0): removing device entry
> 
> The funny thing is that this seems to be very file dependent. If I create an
> ISO it might work fine and I can burn it many times with no failures. However,
> some files always fail. With burncd I can burn every file, but fixating doesn't
> work. The error message I get with burncd is TEST_UNIT_READY Illegal request. I
> can get the exact data later (i.e. the next time I want to destroy yet another
> DVD).
> 
> My DVD drive is an LG GSA-4160B
> 
> Regards,
> Edvard

Ok, I forgot to add that I'm running FreeBSD 5.3R. I also tried to use burncd
to get the error message I mentioned in my earlier mail, but this time I got a
kernel panic instead. I didn't see exactly what happened, but when I returned
to the computer I saw this:

burncd: ioctl(CDRIOCSETBLOCKSIZE): Device not configured
burncd: ioctl(CDRIOCSETBLOCKSIZE): Device not configured
burncd: ioctl(CDRIOCSETBLOCKSIZE): Device not configured
...
burncd: ioctl(CDRIOCSETBLOCKSIZE): Device not configured

Fatal trap 12: page fault while in kernel mode
fault virtual address	= 0x0
fault code		= supervisor read, page not present
instruction pointer	= 0x8:0xc0440470
stack pointer		= 0x10:0xd4030bfc
frame pointer		= 0x10:0xd4030c08
code segment		= base 0x0, limit 0xffff, type 0x1b
			= DPL 0, pres 1, def32 1, gran 1
processor eflags	= interrupt enabled, resume, IOPL = 0
current process		= 2 (g_event)
trap number		= 12
panic: page fault

I'm happy to provide extra information. I could look up the offending code with
the kernel debugger tomorrow (it's 1AM, so I don't feel like it now).

dmesg output as attachment.

- edvard
-------------- next part --------------
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.3-RELEASE #0: Fri Nov 19 21:38:04 EET 2004
    edu at pam:/usr/src/sys/i386/compile/PAM
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Celeron (902.05-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x68a  Stepping = 10
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 536870912 (512 MB)
avail memory = 519892992 (495 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 7 Entries> on motherboard
pci0: <PCI bus> on pcib0
agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem 0xd8000000-0xdbffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686A UDMA66 controller> port 0xd000-0xd00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f at device 7.2 on pci0
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f at device 7.3 on pci0
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xdc00-0xdc3f mem 0xdf000000-0xdf0fffff,0xdf300000-0xdf300fff irq 11 at device 8.0 on pci0
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:90:27:91:25:f6
fxp1: <Intel 82559 Pro/100 Ethernet> port 0xe000-0xe03f mem 0xdf100000-0xdf1fffff,0xdf302000-0xdf302fff irq 10 at device 9.0 on pci0
miibus1: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> on miibus1
inphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: Ethernet address: 00:90:27:be:ae:49
fxp2: <Intel 82559 Pro/100 Ethernet> port 0xe400-0xe43f mem 0xdf200000-0xdf2fffff,0xdf301000-0xdf301fff irq 11 at device 12.0 on pci0
miibus2: <MII bus> on fxp2
inphy2: <i82555 10/100 media interface> on miibus2
inphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp2: Ethernet address: 00:d0:b7:2e:f5:c4
cpu0 on motherboard
orm0: <ISA Option ROMs> at iomem 0xce000-0xcf7ff,0xcd000-0xcdfff,0xcc000-0xccfff,0xc0000-0xcbfff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
Timecounter "TSC" frequency 902052667 Hz quality 800
Timecounters tick every 10.000 msec
ad0: 39083MB <Maxtor 4D040H2/DAK019K0> [79408/16/63] at ata0-master UDMA66
ad1: 190782MB <WDC WD2000JB-00GVA0/08.02D08> [387621/16/63] at ata0-slave UDMA66
acd0: DVDR <HL-DT-ST DVDRAM GSA-4160B/A300> at ata1-master UDMA66
cd0 at ata1 bus 0 target 0 lun 0
cd0: <HL-DT-ST DVDRAM GSA-4160B A300> Removable CD-ROM SCSI-0 device 
cd0: 66.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Mounting root from ufs:/dev/ad0s1a