KVM Switches
Gary Kline
kline at thought.org
Thu May 6 15:05:20 PDT 2004
Please excuse my top-posting. But again, the following
messages show why this list is a major *plus++.
I spent hours digging into various protocols trying
to figure out why my mouse went heywire on my new
platform. From what I read below, it may be my KVM
switch.
I've got a Belkin KVM, Logitech 3-buttom mouse, and IBM
keybd. Go figure...
gary
On Thu, May 06, 2004 at 10:51:53AM -0700, Foster, ThomasX wrote:
> Does your mouse exhibit the behavior of spitting out sync errors from
> the console and sticking in the upper corner of your monitor?
>
> I had this exact problem with an Intellimouse Optical and an Apex
> Outlook KVM. There seems to be an issue with most KVMs not passing the
> protocol correctly when being switched, and psm has issues resyncing. I
> finally resolved the issue by adding the following flags to my device
> hints file for my specific kernel:
>
> hint.psm.0.flags="0x100"
>
> I then enabled device hints in my kernel conf:
>
> hints "mycustomkernel.hints"
>
> I recompiled my kernel and have had no problems since. My mouse now
> works great between my FreeBSD server and my Linux Workstation on the
> Apex KVM.
>
> Hope this helps.
>
> Thomas Foster
> http://www.section6.net
>
>
> -----Original Message-----
> From: owner-freebsd-questions at freebsd.org
> [mailto:owner-freebsd-questions at freebsd.org] On Behalf Of Brent
> Macnaughton
> Sent: Thursday, May 06, 2004 8:42 AM
> To: 'Ron'; freebsd-questions at freebsd.org
> Subject: RE: KVM Switches
>
> I am willing to wager that it is the KVM switch itself that is the
> problem.
> I have had a few problems KVM switches before.
>
> 1) We have a Compaq Proliant 1600. On certain KVMs, the keyboard world
> drop
> keystrokes. It was impossible to use. I switched the KVM out with a
> cheap 2
> port Hawking unit and it worked fine.
>
> 2) We have a Compaq KVM (a very expensive rack-mountable server class
> unit).
> It works great, or so we thought. The other day, we swapped out a two
> button
> mouse with a wheel-mouse. Guess what? Doesn't work at all. The mouse is
> fine, it just won't work through the expensive Compaq KVM.
>
> Are you using Compaq hardware at all? Maybe that is your problem :)
>
> Another thing to mention... When you are booting your FreeBSD box, make
> sure
> you are switched to that box and watch it boot. If you are switched to
> another computer when the mouse daemon loads, I have found that the
> mouse
> won't function at all.
>
> Brent.
>
> -----Original Message-----
> From: Ron [mailto:ron at icrsystems.net]
> Sent: Wednesday, March 31, 2004 5:20 PM
> To: freebsd-questions at FreeBSD.ORG
> Subject: KVM Switches
>
>
> Need information on how to get a KVM switch to work with the FreeBSD
> mouse
> driver.
>
> The Monitor and keyboard work fine but I have to hook a mouse directly
> to
> the box for it to work.
>
> Thanks,
>
> Ron Martin
>
> _______________________________________________
> freebsd-questions at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to
> "freebsd-questions-unsubscribe at freebsd.org"
> _______________________________________________
> freebsd-questions at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to
> "freebsd-questions-unsubscribe at freebsd.org"
> _______________________________________________
> freebsd-questions at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "freebsd-questions-unsubscribe at freebsd.org"
>
--
Gary Kline kline at thought.org www.thought.org Public service Unix
More information about the freebsd-questions
mailing list