Stop. in installworld (4.9)
Ewald Jenisch
a at jenisch.at
Thu May 6 09:45:41 PDT 2004
Hi,
Upon trying to upgrade a 4.9 system to the most recent version I ended
up with a "Stop." during "make installworld".
Here's what I did:
cvsup ... stable-supfile
cd /usr/src
make buildworld
make buildkernel KERNCONF=... (Kernel-config-file below)
make installkernel KERNCONF=...
reboot to single-mode (no errors booting with the new kernel)
mergemaster -p
cd /usr/src
make installworld
Installworld ends with a "Stop." (see below).
Anybody else already seen this?
What can I do against it?
BTW, cvsup-ing again about an hour later didn't help.
TIA for your help,
-ewald
PS: I'm including the full text of the error message as well as my
kernel config and the /var/log/messages below.
------------------------------ < Cut here > ------------------------------
# cd /usr/src
# make installworld
mkdir -p /tmp/install.42
for prog in [ awk cap_mkdb cat chflags chmod chown date echo egrep find grep ln make makewhatis mkdir mtree mv pwd_mkdb rm sed sh sysctl test true uname wc zic; do cp `which $prog` /tmp/install.42; done
cd /usr/src; MAKEOBJDIRPREFIX=/usr/obj MACHINE_ARCH=i386 MACHINE=i386 OBJFORMAT_PATH=/usr/obj/usr/src/i386/usr/libexec GROFF_BIN_PATH=/usr/obj/usr/src/i386/usr/bin GROFF_FONT_PATH=/usr/obj/usr/src/i386/usr/share/groff_font GROFF_TMAC_PATH=/usr/obj/usr/src/i386/usr/share/tmac PERL5LIB=/usr/obj/usr/src/i386/usr/libdata/perl/5.00503 PATH=/usr/obj/usr/src/i386/usr/sbin:/usr/obj/usr/src/i386/usr/bin:/usr/obj/usr/src/i386/usr/games:/tmp/install.42 make -f Makefile.inc1 reinstall
--------------------------------------------------------------
>>> Making hierarchy
--------------------------------------------------------------
cd /usr/src; make -f Makefile.inc1 hierarchy
cd /usr/src/etc; make distrib-dirs
set - `grep "^[a-zA-Z]" /usr/src/etc/locale.deprecated`; while [ $# -gt 0 ] ; do for dir in /usr/share/locale /usr/share/nls /usr/local/share/nls; do test -d /${dir} && cd /${dir}; test -L "$2" && rm -rf "$2"; test \! -L "$1" && test -d "$1" && mv "$1" "$2"; done; shift; shift; done
mtree -deU -f /usr/src/etc/mtree/BSD.root.dist -p /
mtree -deU -f /usr/src/etc/mtree/BSD.var.dist -p /var
mtree -deU -f /usr/src/etc/mtree/BSD.usr.dist -p /usr
mtree -deU -f /usr/src/etc/mtree/BSD.include.dist -p /usr/include
mtree -deU -f /usr/src/etc/mtree/BSD.include.dist -p /usr/libdata/perl/5.00503/mach
mtree -deU -f /usr/src/etc/mtree/BSD.sendmail.dist -p /
cd /; rm -f /sys; ln -s usr/src/sys sys
cd /usr/share/man/en.ISO8859-1; ln -sf ../man* .
cd /usr/share/man; set - `grep "^[a-zA-Z]" /usr/src/etc/man.alias`; while [ $# -gt 0 ] ; do rm -rf "$1"; ln -s "$2" "$1"; shift; shift; done
cd /usr/share/locale; set - `grep "^[a-zA-Z]" /usr/src/etc/locale.alias`; while [ $# -gt 0 ] ; do rm -rf "$1"; ln -s "$2" "$1"; shift; shift; done
cd /usr/share/openssl/man/en.ISO8859-1; ln -sf ../man* .
cd /usr/share/nls; set - `grep "^[a-zA-Z]" /usr/src/etc/nls.alias`; while [ $# -gt 0 ] ; do rm -rf "$1"; ln -s "$2" "$1"; shift; shift; done
--------------------------------------------------------------
>>> Installing everything..
--------------------------------------------------------------
cd /usr/src; make -f Makefile.inc1 install
===> share/info
===> include
creating osreldate.h from newvers.sh
setvar PARAMFILE /usr/src/include/../sys/sys/param.h; . /usr/src/include/../sys/conf/newvers.sh; echo "$COPYRIGHT" > osreldate.h; echo "#ifdef _KERNEL" >> osreldate.h; echo '#error "osreldate.h must not be used in the kernel, use sys/param.h"' >> osreldate.h; echo "#else" >> osreldate.h; echo \#'undef __FreeBSD_version' >> osreldate.h; echo \#'define __FreeBSD_version' $RELDATE >> osreldate.h; echo "#endif" >> osreldate.h
touch: not found
*** Error code 127
Stop in /usr/src/include.
*** Error code 1
Stop in /usr/src.
*** Error code 1
Stop in /usr/src.
*** Error code 1
Stop in /usr/src.
*** Error code 1
Stop in /usr/src.
# exit
Script done on Wed Jan 28 04:57:15 2004
------------------------------ < Cut here > ------------------------------
Kernel-config-file:
machine i386
# cpu I386_CPU
# cpu I486_CPU
# cpu I586_CPU
cpu I686_CPU
ident EJ
maxusers 0
#makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
options MATH_EMULATE #Support for x87 emulation
options INET #InterNETworking
options INET6 #IPv6 communications protocols
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep this!]
options SOFTUPDATES #Enable FFS soft updates support
options UFS_DIRHASH #Improve performance on big directories
options MFS #Memory Filesystem
options MD_ROOT #MD is a potential root device
options NFS #Network Filesystem
options NFS_ROOT #NFS usable as root device, NFS required
options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
options CD9660_ROOT #CD-ROM usable as root, CD9660 required
options PROCFS #Process filesystem
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI
options UCONSOLE #Allow users to grab the console
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options P1003_1B #Posix P1003_1B real-time extensions
options _KPOSIX_PRIORITY_SCHEDULING
options ICMP_BANDLIM #Rate limit bad replies
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~128k to driver.
options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~215k to driver.
# To make an SMP kernel, the next two are needed
options SMP # Symmetric MultiProcessor Kernel
options APIC_IO # Symmetric (APIC) I/O
device isa
device eisa
device pci
# Floppy drives
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
device fd1 at fdc0 drive 1
#
# If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
# don't use the above line for fdc0 but the following one:
#device fdc0
# ATA and ATAPI devices
device ata0 at isa? port IO_WD1 irq 14
device ata1 at isa? port IO_WD2 irq 15
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
device atapist # ATAPI tape drives
options ATA_STATIC_ID #Static device numbering
# SCSI Controllers
device ahb # EISA AHA1742 family
device ahc # AHA2940 and onboard AIC7xxx devices
device ahd # AHA39320/29320 and onboard AIC79xx devices
device amd # AMD 53C974 (Tekram DC-390(T))
device isp # Qlogic family
device mpt # LSI-Logic MPT/Fusion
device ncr # NCR/Symbios Logic
device sym # NCR/Symbios Logic (newer chipsets)
options SYM_SETUP_LP_PROBE_MAP=0x40
# Allow ncr to attach legacy NCR devices when
# both sym and ncr are configured
device adv0 at isa?
device adw
device bt0 at isa?
device aha0 at isa?
device aic0 at isa?
device ncv # NCR 53C500
device nsp # Workbit Ninja SCSI-3
device stg # TMC 18C30/18C50
# SCSI peripherals
device scbus # SCSI bus (required)
device da # Direct Access (disks)
device sa # Sequential Access (tape etc)
device cd # CD
device pass # Passthrough device (direct SCSI access)
# RAID controllers interfaced to the SCSI subsystem
device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
device dpt # DPT Smartcache - See LINT for options!
device iir # Intel Integrated RAID
device mly # Mylex AcceleRAID/eXtremeRAID
device ciss # Compaq SmartRAID 5* series
device twa # 3ware 9000 series PATA/SATA RAID
# RAID controllers
device aac # Adaptec FSA RAID, Dell PERC2/PERC3
#device aacp # SCSI passthrough for aac (requires CAM)
device ida # Compaq Smart RAID
device amr # AMI MegaRAID
device mlx # Mylex DAC960 family
device pst # Promise Supertrak SX6000
device twe # 3ware Escalade
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1 flags 0x1
device psm0 at atkbdc? irq 12
device vga0 at isa?
# splash screen/screen saver
pseudo-device splash
# syscons is the default console driver, resembling an SCO console
device sc0 at isa? flags 0x100
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device vt0 at isa?
#options XSERVER # support for X server on a vt console
#options FAT_CURSOR # start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
#options PCVT_SCANSET=2 # IBM keyboards are non-std
device agp # support several AGP chipsets
# Floating point support - do not disable.
device npx0 at nexus? port IO_NPX irq 13
# Power management support (see LINT for more options)
device apm0 at nexus? disable flags 0x20 # Advanced Power Management
# PCCARD (PCMCIA) support
device card
device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000
device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000 disable
# Serial (COM) ports
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
device sio1 at isa? port IO_COM2 irq 3
device sio2 at isa? disable port IO_COM3 irq 5
device sio3 at isa? disable port IO_COM4 irq 9
# Parallel port
device ppc0 at isa? irq 7
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# PCI Ethernet NICs.
device de # DEC/Intel DC21x4x (``Tulip'')
device em # Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'')
device txp # 3Com 3cR990 (``Typhoon'')
device vx # 3Com 3c590, 3c595 (``Vortex'')
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
device dc # DEC/Intel 21143 and various workalikes
device fxp # Intel EtherExpress PRO/100B (82557, 82558)
device pcn # AMD Am79C97x PCI 10/100 NICs
device rl # RealTek 8129/8139
device sf # Adaptec AIC-6915 (``Starfire'')
device sis # Silicon Integrated Systems SiS 900/SiS 7016
device ste # Sundance ST201 (D-Link DFE-550TX)
device tl # Texas Instruments ThunderLAN
device tx # SMC EtherPower II (83c170 ``EPIC'')
device vr # VIA Rhine, Rhine II
device wb # Winbond W89C840F
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
device bge # Broadcom BCM570x (``Tigon III'')
# ISA Ethernet NICs.
# 'device ed' requires 'device miibus'
device ed0 at isa? disable port 0x280 irq 10 iomem 0xd8000
device ex
device ep
device fe0 at isa? disable port 0x300
# Xircom Ethernet
device xe
# PRISM I IEEE 802.11b wireless NIC.
device awi
# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
# exists only as a PCMCIA device, so there is no ISA attachment needed
# and resources will always be dynamically assigned by the pccard code.
device wi
# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
# mode (the factory default). If you set the switches on your ISA
# card for a manually chosen I/O address and IRQ, you must specify
# those parameters here.
device an
# The probe order of these is presently determined by i386/isa/isa_compat.c.
device ie0 at isa? disable port 0x300 irq 10 iomem 0xd0000
#device le0 at isa? disable port 0x300 irq 5 iomem 0xd0000
device lnc0 at isa? disable port 0x280 irq 10 drq 0
device cs0 at isa? disable port 0x300
device sn0 at isa? disable port 0x300 irq 10
# Pseudo devices - the number indicates how many units to allocate.
pseudo-device loop # Network loopback
pseudo-device ether # Ethernet support
pseudo-device sl 1 # Kernel SLIP
pseudo-device ppp 1 # Kernel PPP
pseudo-device tun # Packet tunnel.
pseudo-device pty # Pseudo-ttys (telnet etc)
pseudo-device md # Memory "disks"
pseudo-device gif # IPv6 and IPv4 tunneling
pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device bpf #Berkeley packet filter
# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device usb # USB Bus (required)
device ugen # Generic
device uhid # "Human Interface Devices"
device ukbd # Keyboard
device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and da
device ums # Mouse
device uscanner # Scanners
device urio # Diamond Rio MP3 Player
# USB Ethernet, requires mii
device aue # ADMtek USB ethernet
device cue # CATC USB ethernet
device kue # Kawasaki LSI USB ethernet
# FireWire support
device firewire # FireWire bus code
device sbp # SCSI over FireWire (Requires scbus and da)
device fwe # Ethernet over FireWire (non-standard!)
------------------------------ < Cut here > ------------------------------
Jan 28 03:57:32 io /kernel: 0x000f0011, at 0xfec02000
Jan 28 03:57:32 io /kernel: io3 (APIC): apic id: 5, version: 0x000f0011, at 0xfec03000
Jan 28 03:57:32 io /kernel: Preloaded elf kernel "kernel" at 0xc0561000.
Jan 28 03:57:32 io /kernel: Warning: Pentium 4 CPU: PSE disabled
Jan 28 03:57:32 io /kernel: Pentium Pro MTRR support enabled
Jan 28 03:57:32 io /kernel: md0: Malloc disk
Jan 28 03:57:32 io /kernel: npx0: <math processor> on motherboard
Jan 28 03:57:32 io /kernel: npx0: INT 16 interface
Jan 28 03:57:33 io /kernel: pcib0: <Host to PCI bridge> on motherboard
Jan 28 03:57:33 io /kernel: pci0: <PCI bus> on pcib0
Jan 28 03:57:33 io /kernel: pci0: <ATI Mach64-GR graphics accelerator> at 3.0
Jan 28 03:57:33 io /kernel: ciss0: <Compaq Smart Array 5i> port 0x2800-0x28ff mem 0xf5df0000-0xf5df3fff,0xf5f80000-0xf5fbffff irq 3 at device 4.0 on pci0
Jan 28 03:57:33 io /kernel: pci0: <unknown card> (vendor=0x0e11, dev=0xb203) at 5.0 irq 5
Jan 28 03:57:33 io /kernel: pci0: <unknown card> (vendor=0x0e11, dev=0xb204) at 5.2 irq 7
Jan 28 03:57:33 io /kernel: isab0: <PCI to ISA bridge (vendor=1166 device=0201)> at device 15.0 on pci0
Jan 28 03:57:33 io /kernel: isa0: <ISA bus> on isab0
Jan 28 03:57:33 io /kernel: atapci0: <ServerWorks CSB5 ATA100 controller> port 0x2000-0x200f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 15.1 on pci0
Jan 28 03:57:33 io /kernel: ata0: at 0x1f0 irq 14 on atapci0
Jan 28 03:57:33 io /kernel: ata1: at 0x170 irq 15 on atapci0
Jan 28 03:57:33 io /kernel: ohci0: <OHCI (generic) USB controller> mem 0xf5e70000-0xf5e70fff irq 10 at device 15.2 on pci0
Jan 28 03:57:33 io /kernel: usb0: OHCI version 1.0, legacy support
Jan 28 03:57:33 io /kernel: usb0: SMM does not respond, resetting
Jan 28 03:57:33 io /kernel: usb0: <OHCI (generic) USB controller> on ohci0
Jan 28 03:57:33 io /kernel: usb0: USB revision 1.0
Jan 28 03:57:33 io /kernel: uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
Jan 28 03:57:33 io /kernel: uhub0: 4 ports with 4 removable, self powered
Jan 28 03:57:33 io /kernel: pcib1: <Host to PCI bridge> on motherboard
Jan 28 03:57:33 io /kernel: pci1: <PCI bus> on pcib1
Jan 28 03:57:33 io /kernel: bge0: <Broadcom BCM5703 Gigabit Ethernet, ASIC rev. 0x1002> mem 0xf7ef0000-0xf7efffff irq 11 at device 2.0 on pci1
Jan 28 03:57:33 io /kernel: bge0: Ethernet address: 00:0f:20:79:1c:c3
Jan 28 03:57:33 io /kernel: miibus0: <MII bus> on bge0
Jan 28 03:57:33 io /kernel: brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0
Jan 28 03:57:33 io /kernel: brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
Jan 28 03:57:33 io /kernel: pcib2: <Host to PCI bridge> on motherboard
Jan 28 03:57:33 io /kernel: pci2: <PCI bus> on pcib2
Jan 28 03:57:33 io /kernel: pcib3: <Host to PCI bridge> on motherboard
Jan 28 03:57:33 io /kernel: pci3: <PCI bus> on pcib3
Jan 28 03:57:33 io /kernel: pcib4: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard
Jan 28 03:57:33 io /kernel: pci4: <PCI bus> on pcib4
Jan 28 03:57:33 io /kernel: bge1: <Broadcom BCM5703 Gigabit Ethernet, ASIC rev. 0x1002> mem 0xf7ff0000-0xf7ffffff irq 15 at device 2.0 on pci4
Jan 28 03:57:33 io /kernel: bge1: Ethernet address: 00:0f:20:79:1c:c5
Jan 28 03:57:33 io /kernel: miibus1: <MII bus> on bge1
Jan 28 03:57:33 io /kernel: brgphy1: <BCM5703 10/100/1000baseTX PHY> on miibus1
Jan 28 03:57:33 io /kernel: brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
Jan 28 03:57:33 io /kernel: pcib5: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard
Jan 28 03:57:33 io /kernel: pci5: <PCI bus> on pcib5
Jan 28 03:57:33 io /kernel: eisa0: <EISA bus> on motherboard
Jan 28 03:57:33 io /kernel: mainboard0: <CPQ0733 (System Board)> on eisa0 slot 0
Jan 28 03:57:33 io /kernel: eisa0: unknown card AHC0000 (0x05030000) at slot 2
Jan 28 03:57:33 io /kernel: orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xee000-0xeffff on isa0
Jan 28 03:57:33 io /kernel: pmtimer0 on isa0
Jan 28 03:57:33 io /kernel: fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
Jan 28 03:57:33 io /kernel: fdc0: FIFO enabled, 8 bytes threshold
Jan 28 03:57:33 io /kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0
Jan 28 03:57:33 io /kernel: atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
Jan 28 03:57:33 io /kernel: atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
Jan 28 03:57:33 io /kernel: kbd0 at atkbd0
Jan 28 03:57:33 io /kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Jan 28 03:57:33 io /kernel: sc0: <System console> at flags 0x100 on isa0
Jan 28 03:57:33 io /kernel: sc0: VGA <16 virtual consoles, flags=0x300>
Jan 28 03:57:33 io /kernel: sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
Jan 28 03:57:33 io /kernel: sio0: type 16550A
Jan 28 03:57:33 io /kernel: sio1: configured irq 3 not in bitmap of probed irqs 0
Jan 28 03:57:33 io /kernel: ppc0: parallel port not found.
Jan 28 03:57:33 io /kernel: APIC_IO: Testing 8254 interrupt delivery
Jan 28 03:57:33 io /kernel: APIC_IO: routing 8254 via IOAPIC #0 intpin 2
Jan 28 03:57:33 io /kernel: SMP: AP CPU #3 Launched!
Jan 28 03:57:33 io /kernel: SMP: AP CPU #1 Launched!
Jan 28 03:57:33 io /kernel: SMP: AP CPU #2 Launched!
Jan 28 03:57:33 io /kernel: acd0: CDROM <CRN-8245B> at ata0-master PIO4
Jan 28 03:57:33 io /kernel: Mounting root from ufs:/dev/da0s1a
Jan 28 03:57:33 io /kernel: da0 at ciss0 bus 0 target 0 lun 0
Jan 28 03:57:33 io /kernel: da0: <COMPAQ RAID 1 VOLUME OK> Fixed Direct Access SCSI-0 device
Jan 28 03:57:33 io /kernel: da0: 135.168MB/s transfers
Jan 28 03:57:33 io /kernel: da0: 140006MB (286734240 512 byte sectors: 255H 32S/T 35139C)
Jan 28 03:57:33 io /kernel: libio/PlotFile.h /usr/src
Jan 28 03:57:33 io /kernel: sr/src/gnu/lib/libstdc++/
Jan 28 03:57:33 io /kernel: stdc++/stl/set.h /usr/src
Jan 28 03:57:33 io /kernel: ./../../contrib/libstdc++
Jan 28 03:58:15 io su: ej to root on /dev/ttyp0
More information about the freebsd-questions
mailing list