RAID - can a mirrored disk be used on a non-RAID controller?

[Chris]

On Sunday 28 March 2004 02:11 pm, Dan Langille wrote:
> I had a hard disk failure this weekend.  I had been considering RAID
> mirroring but this has brought the issue forward.
>
> My plan is to create a box with two drives and use a RAID card to
> mirror them.  Should the RAID card die, can I move a drive to another
> box with a standard IDE controller and run the system from there?  In
> short, I'm asking, does the RAID controller create a drive image
> which cannot be used by an IDE controller?

Dan, 
	I assume the RAID card is IDE? If not, then SCSI cant be hooked up to an IDE 
cable - but you knew that.


-- 
Best regards,
Chris