MPD running multilink with modems
leo luis
leo_luis99 at yahoo.com
Sat Mar 27 08:55:00 PST 2004
HI,
I'm trying to configure 2 freeBSD boxes with mpd. I have installed version 3.9. I'm don't really know if it is a failure or just a wrong configuration in the server, because when I do a dialup attempt the first modem answers the call and I can run traffic as well, but the second alway go immediatly in the way that there is no time to start LCP in the client, but LCP start in the server. I could see the server is trying to send LCP packete itselve.
Thanks
Leo
Configuration for server:
dialin:
new -i ng0 dialin modem2 modem1
set iface addrs 1.1.1.1 2.2.2.2
#set iface idle 900
set debug 8
set bundle enable noretry
set bundle enable multilink
set ipcp ranges 1.1.1.1/32 2.2.2.2/32
set ipcp yes vjcomp
set link enable chap
set link enable pap
set link disable check-magic
set link yes acfcomp protocomp
link modem2
set modem idle-script AnswerCall
link modem1
set modem idle-script AnswerCall
modem1:
set link type modem
set modem speed 115200
set modem device /dev/cuaa0
modem2:
set link type modem
set modem speed 115200
set modem device /dev/cuaa1
configuration for client:
multi:
new -i ng0 multi salida1 salida2
set iface route default
#set iface addrs 172.25.10.10 10.0.0.97
set iface disable on-demand
set iface idle 900
#set debug 8
set bundle enable multilink
set bundle accept multilink
set bundle authname admin
set ipcp ranges 1.0.0.0/0 1.0.0.0/0
set ipcp yes vjcomp
set link disable chap pap
set link accept chap pap
set link yes acfcomp protocomp
link salida2
set modem script DialPeer
set modem var $Telephone "40187"
link salida1
set modem script DialPeer
set modem var $Telephone "40091"
open
mpd.links file
salida1:
set link type modem
set modem speed 115200
set modem device /dev/cuaa1
set modem var $DialPrefix "DT"
salida2:
set link type modem
set modem speed 115200
set modem device /dev/cuaa0
set modem var $DialPrefix "DT"
[dialin] ppp node is "mpd944-dialin"
[dialin] using interface ng0
mpd: option "noretry" unknown
[dialin:modem1] [modem2] chat: Detected USR Sportster modem.
[modem1] chat: Detected USR U.S. Robotics 56K modem.
[modem2] chat: Waiting for ring...
[modem1] chat: Waiting for ring...
[modem1] chat: Incoming call detected...
[modem2] chat: Incoming call detected...
[modem1] chat: Connected at .
[modem1] idle script succeeded, action=answer
[modem1] opening link in answer mode
[dialin] IPCP: Open event
[dialin] IPCP: state change Initial --> Starting
[dialin] IPCP: LayerStart
[dialin] bundle: OPEN event in state CLOSED
[dialin] opening link "modem2"...
[dialin] opening link "modem1"...
[modem2] link: OPEN event
[modem2] LCP: Open event
[modem2] LCP: state change Initial --> Starting
[modem2] LCP: LayerStart
[modem1] link: OPEN event
[modem1] LCP: Open event
[modem1] LCP: state change Initial --> Starting
[modem1] LCP: LayerStart
[modem2] device: OPEN event in state DOWN
[modem2] device is now in state OPENING
[modem1] device: OPEN event in state DOWN
[modem1] chat script succeeded
[modem1] device is now in state OPENING
[modem1] device: UP event in state OPENING
[modem1] device is now in state UP
[modem1] link: UP event
[modem1] link: origination is remote
[modem1] LCP: Up event
[modem1] LCP: state change Starting --> Req-Sent
[modem1] LCP: phase shift DEAD --> ESTABLISH
[modem1] LCP: SendConfigReq #1
ACCMAP 0x000a0000
MRU 1500
MAGICNUM 024ce600
AUTHPROTO CHAP MSOFTv2
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 60 8c 34 b4 41
[modem1] LCP: rec'd Configure Reject #172 link 1 (Req-Sent)
Wrong id#, expecting 1
[modem1] LCP: rec'd Configure Request #1 link 1 (Req-Sent)
ACFCOMP
PROTOCOMP
ACCMAP 0x000a0000
MRU 1500
MAGICNUM 12ee3ecb
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 60 8c eb 7c 5c
[modem1] LCP: SendConfigRej #1
ACFCOMP
PROTOCOMP
[modem1] LCP: rec'd Configure Request #2 link 1 (Req-Sent)
ACCMAP 0x000a0000
MRU 1500
MAGICNUM 12ee3ecb
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 60 8c eb 7c 5c
[modem1] LCP: SendConfigAck #2
ACCMAP 0x000a0000
MRU 1500
MAGICNUM 12ee3ecb
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 60 8c eb 7c 5c
[modem1] LCP: state change Req-Sent --> Ack-Sent
[modem1] LCP: SendConfigReq #2
ACCMAP 0x000a0000
MRU 1500
MAGICNUM 024ce600
AUTHPROTO CHAP MSOFTv2
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 60 8c 34 b4 41
[modem1] LCP: rec'd Configure Ack #2 link 1 (Ack-Sent)
ACCMAP 0x000a0000
MRU 1500
MAGICNUM 024ce600
AUTHPROTO CHAP MSOFTv2
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 60 8c 34 b4 41
[modem1] LCP: state change Ack-Sent --> Opened
[modem1] LCP: phase shift ESTABLISH --> AUTHENTICATE
[modem1] LCP: auth: peer wants nothing, I want CHAP
[modem1] CHAP: sending CHALLENGE
[modem1] LCP: LayerUp
[modem1] CHAP: rec'd RESPONSE #1
Name: "admin"
Peer name: "admin"
Response is valid
[modem1] CHAP: sending SUCCESS
[modem1] LCP: authorization successful
[modem1] LCP: phase shift AUTHENTICATE --> NETWORK
[dialin] up: 1 link, total bandwidth 28800 bps
[dialin] IPCP: Up event
[dialin] IPCP: state change Starting --> Req-Sent
[dialin] IPCP: SendConfigReq #1
IPADDR 1.1.1.1
COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
[dialin] error writing len 20 frame to bypass: Network is down
[modem1] LCP: SendIdent #1
MESG: RSG_TCP
[dialin] IPCP: rec'd Configure Request #1 link 1 (Req-Sent)
IPADDR 1.0.0.0
NAKing with 10.0.0.97
COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
[dialin] IPCP: SendConfigNak #1
IPADDR 10.0.0.97
[dialin] IPCP: rec'd Configure Request #2 link -1 (Req-Sent)
IPADDR 10.0.0.97
10.0.0.97 is OK
COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
[dialin] IPCP: SendConfigAck #2
IPADDR 10.0.0.97
COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
[dialin] IPCP: state change Req-Sent --> Ack-Sent
[modem2] chat script succeeded
[modem2] device: UP event in state OPENING
[modem2] device is now in state UP
[modem2] link: UP event
[modem2] link: origination is remote
[modem2] LCP: Up event
[modem2] LCP: state change Starting --> Req-Sent
[modem2] LCP: phase shift DEAD --> ESTABLISH
[modem2] LCP: SendConfigReq #1
ACFCOMP
PROTOCOMP
ACCMAP 0x000a0000
MRU 1500
MAGICNUM 043c7a70
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 60 8c 34 b4 41
[modem2] LCP: rec'd Configure Request #1 link 0 (Req-Sent)
ACFCOMP
PROTOCOMP
ACCMAP 0x000a0000
MRU 1500
MAGICNUM 043c7a70
Same magic! Detected loopback condition
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 60 8c 34 b4 41
[modem2] LCP: SendConfigNak #1
MAGICNUM fbc3858f
[modem2] LCP: rec'd Configure Nak #1 link 0 (Req-Sent)
MAGICNUM fbc3858f
[modem2] LCP: SendConfigReq #2
ACFCOMP
PROTOCOMP
ACCMAP 0x000a0000
MRU 1500
MAGICNUM 04df6410
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 60 8c 34 b4 41
[modem2] LCP: rec'd Configure Request #2 link 0 (Req-Sent)
ACFCOMP
PROTOCOMP
ACCMAP 0x000a0000
MRU 1500
MAGICNUM 04df6410
Same magic! Detected loopback condition
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 60 8c 34 b4 41
[modem2] LCP: SendConfigNak #2
MAGICNUM fb209bef
[modem2] LCP: rec'd Configure Nak #2 link 0 (Req-Sent)
MAGICNUM fb209bef
[modem2] LCP: SendConfigReq #3
ACFCOMP
PROTOCOMP
ACCMAP 0x000a0000
MRU 1500
MAGICNUM 023ae0f0
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 60 8c 34 b4 41
[modem2] LCP: rec'd Configure Request #3 link 0 (Req-Sent)
ACFCOMP
PROTOCOMP
ACCMAP 0x000a0000
MRU 1500
MAGICNUM 023ae0f0
Same magic! Detected loopback condition
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 60 8c 34 b4 41
[modem2] LCP: SendConfigNak #3
MAGICNUM fdc51f0f
[modem2] LCP: rec'd Configure Nak #3 link 0 (Req-Sent)
MAGICNUM fdc51f0f
[modem2] LCP: SendConfigReq #4
ACFCOMP
PROTOCOMP
ACCMAP 0x000a0000
MRU 1500
MAGICNUM 02d81a00
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 60 8c 34 b4 41
[modem2] LCP: rec'd Configure Request #4 link 0 (Req-Sent)
ACFCOMP
PROTOCOMP
ACCMAP 0x000a0000
MRU 1500
MAGICNUM 02d81a00
Same magic! Detected loopback condition
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 60 8c 34 b4 41
[modem2] LCP: SendConfigNak #4
MAGICNUM fd27e5ff
[modem2] LCP: rec'd Configure Nak #4 link 0 (Req-Sent)
MAGICNUM fd27e5ff
[modem2] LCP: SendConfigReq #5
ACFCOMP
PROTOCOMP
ACCMAP 0x000a0000
MRU 1500
MAGICNUM ffbb5b50
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 60 8c 34 b4 41
[modem2] LCP: rec'd Configure Request #5 link 0 (Req-Sent)
ACFCOMP
PROTOCOMP
ACCMAP 0x000a0000
MRU 1500
MAGICNUM ffbb5b50
Same magic! Detected loopback condition
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 60 8c 34 b4 41
[modem2] LCP: SendConfigNak #5
MAGICNUM 0044a4af
[modem2] LCP: rec'd Configure Nak #5 link 0 (Req-Sent)
MAGICNUM 0044a4af
[modem2] LCP: SendConfigReq #6
ACFCOMP
PROTOCOMP
ACCMAP 0x000a0000
MRU 1500
MAGICNUM ed6d5270
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 60 8c 34 b4 41
[modem2] LCP: rec'd Configure Request #6 link 0 (Req-Sent)
ACFCOMP
PROTOCOMP
ACCMAP 0x000a0000
MRU 1500
MAGICNUM ed6d5270
Same magic! Detected loopback condition
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 60 8c 34 b4 41
[modem2] LCP: not converging
[modem2] LCP: parameter negotiation failed
[modem2] LCP: state change Req-Sent --> Stopped
[modem2] LCP: LayerFinish
[modem2] device: CLOSE event in state UP
[modem2] device is now in state CLOSING
[modem2] device: DOWN event in state CLOSING
[modem2] device is now in state DOWN
[modem2] link: DOWN event
[modem2] LCP: Down event
[modem2] LCP: state change Stopped --> Starting
[modem2] LCP: phase shift ESTABLISH --> DEAD
[modem2] LCP: LayerStart
[modem2] device: OPEN event in state DOWN
[modem2] pausing 7 seconds before open
[modem2] device is now in state DOWN
[modem2] device: OPEN event in state DOWN
[modem2] device is now in state DOWN
[dialin] IPCP: SendConfigReq #2
IPADDR 1.1.1.1
COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
[dialin] IPCP: rec'd Configure Ack #2 link -1 (Ack-Sent)
IPADDR 1.1.1.1
COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
[dialin] IPCP: state change Ack-Sent --> Opened
[dialin] IPCP: LayerUp
1.1.1.1 -> 10.0.0.97
[dialin] IFACE: Up event
[dialin] IFACE: Opening
[dialin] exec: /sbin/ifconfig ng0 1.1.1.1 10.0.0.97 netmask 0xffffffff -link0
[dialin] IFACE: Up event
[modem2] chat: Detected USR Sportster modem.
[modem2] chat: Waiting for ring...
[modem2] device: OPEN event in state DOWN
[modem2] pausing 1 seconds before open
[modem2] device is now in state DOWN
[modem2] device: OPEN event in state DOWN
[modem2] device is now in state OPENING
[modem2] chat script succeeded
[modem2] device: UP event in state OPENING
[modem2] device is now in state UP
[modem2] link: UP event
[modem2] link: origination is remote
[modem2] LCP: Up event
[modem2] LCP: state change Starting --> Req-Sent
[modem2] LCP: phase shift DEAD --> ESTABLISH
[modem2] LCP: SendConfigReq #7
ACFCOMP
PROTOCOMP
ACCMAP 0x000a0000
MRU 1500
MAGICNUM e93d5350
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 60 8c 34 b4 41
[modem2] LCP: rec'd Configure Request #7 link 0 (Req-Sent)
ACFCOMP
PROTOCOMP
ACCMAP 0x000a0000
MRU 1500
MAGICNUM e93d5350
Same magic! Detected loopback condition
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 60 8c 34 b4 41
[modem2] LCP: SendConfigNak #7
MAGICNUM 16c2acaf
[modem2] LCP: rec'd Configure Nak #7 link 0 (Req-Sent)
MAGICNUM 16c2acaf
[modem2] LCP: SendConfigReq #8
ACFCOMP
PROTOCOMP
ACCMAP 0x000a0000
MRU 1500
MAGICNUM f4ebd490
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 60 8c 34 b4 41
[modem2] LCP: rec'd Configure Request #8 link 0 (Req-Sent)
ACFCOMP
PROTOCOMP
ACCMAP 0x000a0000
MRU 1500
MAGICNUM f4ebd490
Same magic! Detected loopback condition
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 60 8c 34 b4 41
[modem2] LCP: SendConfigNak #8
MAGICNUM 0b142b6f
[modem2] LCP: rec'd Configure Nak #8 link 0 (Req-Sent)
MAGICNUM 0b142b6f
[modem2] LCP: SendConfigReq #9
ACFCOMP
PROTOCOMP
ACCMAP 0x000a0000
MRU 1500
MAGICNUM f5f55840
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 60 8c 34 b4 41
[modem2] LCP: rec'd Configure Request #9 link 0 (Req-Sent)
ACFCOMP
PROTOCOMP
ACCMAP 0x000a0000
MRU 1500
MAGICNUM f5f55840
Same magic! Detected loopback condition
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 60 8c 34 b4 41
[modem2] LCP: SendConfigNak #9
MAGICNUM 0a0aa7bf
[modem2] LCP: rec'd Configure Nak #9 link 0 (Req-Sent)
MAGICNUM 0a0aa7bf
[modem2] LCP: SendConfigReq #10
ACFCOMP
PROTOCOMP
ACCMAP 0x000a0000
MRU 1500
MAGICNUM f2ddd7d0
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 60 8c 34 b4 41
[modem2] LCP: rec'd Configure Request #10 link 0 (Req-Sent)
ACFCOMP
PROTOCOMP
ACCMAP 0x000a0000
MRU 1500
MAGICNUM f2ddd7d0
Same magic! Detected loopback condition
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 60 8c 34 b4 41
[modem2] LCP: SendConfigNak #10
MAGICNUM 0d22282f
[modem2] LCP: rec'd Configure Nak #10 link 0 (Req-Sent)
MAGICNUM 0d22282f
[modem2] LCP: SendConfigReq #11
ACFCOMP
PROTOCOMP
ACCMAP 0x000a0000
MRU 1500
MAGICNUM f3e9b490
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 60 8c 34 b4 41
[modem2] LCP: rec'd Configure Request #11 link 0 (Req-Sent)
ACFCOMP
PROTOCOMP
ACCMAP 0x000a0000
MRU 1500
MAGICNUM f3e9b490
Same magic! Detected loopback condition
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 60 8c 34 b4 41
[modem2] LCP: SendConfigNak #11
MAGICNUM 0c164b6f
[modem2] LCP: rec'd Configure Nak #11 link 0 (Req-Sent)
MAGICNUM 0c164b6f
[modem2] LCP: SendConfigReq #12
ACFCOMP
PROTOCOMP
ACCMAP 0x000a0000
MRU 1500
MAGICNUM f2afe100
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 60 8c 34 b4 41
[modem2] LCP: rec'd Configure Request #12 link 0 (Req-Sent)
ACFCOMP
PROTOCOMP
ACCMAP 0x000a0000
MRU 1500
MAGICNUM f2afe100
Same magic! Detected loopback condition
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 60 8c 34 b4 41
[modem2] LCP: not converging
[modem2] LCP: parameter negotiation failed
[modem2] LCP: state change Req-Sent --> Stopped
[modem2] LCP: LayerFinish
[modem2] device: CLOSE event in state UP
[modem2] device is now in state CLOSING
[modem2] device: DOWN event in state CLOSING
[modem2] device is now in state DOWN
[modem2] link: DOWN event
[modem2] LCP: Down event
[modem2] LCP: state change Stopped --> Starting
[modem2] LCP: phase shift ESTABLISH --> DEAD
[modem2] LCP: LayerStart
[modem2] device: OPEN event in state DOWN
[modem2] pausing 9 seconds before open
[modem2] device is now in state DOWN
[modem2] device: OPEN event in state DOWN
[modem2] device is now in state DOWN
[dialin:modem1]
[dialin:modem1]
[dialin:modem1]
[dialin:modem1] [modem2] chat: Detected USR Sportster modem.
[modem2] chat: Waiting for ring...
[dialin:modem1]
[dialin:modem1]
[dialin:modem1]
[dialin:modem1]
[dialin:modem1]
[dialin:modem1] [modem2] device: OPEN event in state DOWN
[modem2] device is now in state OPENING
[modem2] chat script succeeded
[modem2] device: UP event in state OPENING
[modem2] device is now in state UP
[modem2] link: UP event
[modem2] link: origination is remote
[modem2] LCP: Up event
[modem2] LCP: state change Starting --> Req-Sent
[modem2] LCP: phase shift DEAD --> ESTABLISH
[modem2] LCP: SendConfigReq #13
ACFCOMP
PROTOCOMP
ACCMAP 0x000a0000
MRU 1500
MAGICNUM dd31d390
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 60 8c 34 b4 41
[modem2] LCP: rec'd Configure Request #13 link 0 (Req-Sent)
ACFCOMP
PROTOCOMP
ACCMAP 0x000a0000
MRU 1500
MAGICNUM dd31d390
Same magic! Detected loopback condition
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 60 8c 34 b4 41
[modem2] LCP: SendConfigNak #13
MAGICNUM 22ce2c6f
[modem2] LCP: rec'd Configure Nak #13 link 0 (Req-Sent)
MAGICNUM 22ce2c6f
[modem2] LCP: SendConfigReq #14
ACFCOMP
PROTOCOMP
ACCMAP 0x000a0000
MRU 1500
MAGICNUM de3ff6f0
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 60 8c 34 b4 41
[modem2] LCP: rec'd Configure Request #14 link 0 (Req-Sent)
ACFCOMP
PROTOCOMP
ACCMAP 0x000a0000
MRU 1500
MAGICNUM de3ff6f0
Same magic! Detected loopback condition
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 60 8c 34 b4 41
[modem2] LCP: SendConfigNak #14
MAGICNUM 21c0090f
[modem2] LCP: rec'd Configure Nak #14 link 0 (Req-Sent)
MAGICNUM 21c0090f
[modem2] LCP: SendConfigReq #15
ACFCOMP
PROTOCOMP
ACCMAP 0x000a0000
MRU 1500
MAGICNUM db25c140
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 60 8c 34 b4 41
[modem2] LCP: rec'd Configure Request #15 link 0 (Req-Sent)
ACFCOMP
PROTOCOMP
ACCMAP 0x000a0000
MRU 1500
MAGICNUM db25c140
Same magic! Detected loopback condition
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 60 8c 34 b4 41
[modem2] LCP: SendConfigNak #15
MAGICNUM 24da3ebf
[modem2] LCP: rec'd Configure Nak #15 link 0 (Req-Sent)
MAGICNUM 24da3ebf
[modem2] LCP: SendConfigReq #16
ACFCOMP
PROTOCOMP
ACCMAP 0x000a0000
MRU 1500
MAGICNUM dc369630
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 60 8c 34 b4 41
[modem2] LCP: rec'd Configure Request #16 link 0 (Req-Sent)
ACFCOMP
PROTOCOMP
ACCMAP 0x000a0000
MRU 1500
MAGICNUM dc369630
Same magic! Detected loopback condition
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 60 8c 34 b4 41
[modem2] LCP: SendConfigNak #16
MAGICNUM 23c969cf
[modem2] LCP: rec'd Configure Nak #16 link 0 (Req-Sent)
MAGICNUM 23c969cf
[modem2] LCP: SendConfigReq #17
ACFCOMP
PROTOCOMP
ACCMAP 0x000a0000
MRU 1500
MAGICNUM d916fd60
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 60 8c 34 b4 41
[modem2] LCP: rec'd Configure Request #17 link 0 (Req-Sent)
ACFCOMP
PROTOCOMP
ACCMAP 0x000a0000
MRU 1500
MAGICNUM d916fd60
Same magic! Detected loopback condition
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 60 8c 34 b4 41
[modem2] LCP: SendConfigNak #17
MAGICNUM 26e9029f
[modem2] LCP: rec'd Configure Nak #17 link 0 (Req-Sent)
MAGICNUM 26e9029f
[modem2] LCP: SendConfigReq #18
ACFCOMP
PROTOCOMP
ACCMAP 0x000a0000
MRU 1500
MAGICNUM e69c7c80
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 60 8c 34 b4 41
[modem2] LCP: rec'd Configure Request #18 link 0 (Req-Sent)
ACFCOMP
PROTOCOMP
ACCMAP 0x000a0000
MRU 1500
MAGICNUM e69c7c80
Same magic! Detected loopback condition
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 60 8c 34 b4 41
[modem2] LCP: not converging
[modem2] LCP: parameter negotiation failed
[modem2] LCP: state change Req-Sent --> Stopped
[modem2] LCP: LayerFinish
[modem2] device: CLOSE event in state UP
[modem2] device is now in state CLOSING
[modem2] device: DOWN event in state CLOSING
[modem2] device is now in state DOWN
[modem2] link: DOWN event
[modem2] LCP: Down event
[modem2] LCP: state change Stopped --> Starting
[modem2] LCP: phase shift ESTABLISH --> DEAD
[modem2] LCP: LayerStart
[modem2] device: OPEN event in state DOWN
[modem2] pausing 9 seconds before open
[modem2] device is now in state DOWN
[modem2] device: OPEN event in state DOWN
[modem2] device is now in state DOWN
^Cmpd: caught fatal signal int
mpd: fatal error, exiting
[dialin] IPCP: Down event
[dialin] IPCP: state change Opened --> Starting
[dialin] IPCP: LayerDown
[dialin] IFACE: Down event
[dialin] exec: /sbin/ifconfig ng0 down delete -link0
[dialin] IFACE: Close event
[dialin] IPCP: Close event
[dialin] IPCP: state change Starting --> Initial
[dialin] IPCP: LayerFinish
mpd: process 944 terminated
Thanks
---------------------------------
Do you Yahoo!?
Yahoo! Finance Tax Center - File online. File on time.
More information about the freebsd-questions
mailing list