vinum sd length and stripesize questions

[freebsd_daemon]

Dear list

I have three partition of the same size on different disks (ad0, ad1 and
ad2). In disklabel they show up as 

e:  2097152   720896    4.2BSD     2048 16384    89   # (Cyl.  715*- 2795*)

(f: ... for ad1 and ad2)

In df they show up as:

Filesystem  1K-blocks   Used  Avail Capacity  Mounted on
/dev/ad0s1e   1032142      2 949570     0%    /data0
/dev/ad1s1f   1032142      2 949570     0%    /data1
/dev/ad2s1f   1032142      2 949570     0%    /data2

MY FIRST QUESTION IS:

In the vinum configuration's sd length attribute am I to use the df 1K-block
or the df Avail size? (e.g. sd length 1032142 drive ... or sd lenth 949570
drive ...). I am asking because Lucas writes in AbsoluteBSD df Avail, but I
used accidently 1k-block. I don't want to keep on installing and configuring
and later on run into trouble. I cross checked on Lehey's web page but did not
find any information.

MY SECOND QUESTION IS:

vinum(8) stated:

"org organization [stripesize ]
[stipesize] For type raid5, it specifies the size of a group. A group is a
portion of a plex which stores the parity bits all in the same subdisk. It
must be a factor of the plex size (in other words, the result of dividing the
plex size by the stripe size must be an integer), and it must be a multiple of
a disk sector (512 bytes)."

I understand this as stripesize has to devide sd length by ) AND 512k has to
devide stripesize by 0 is that true?

TIA

zheyu

-- 
+++ NEU bei GMX und erstmalig in Deutschland: TÜV-geprüfter Virenschutz +++
100% Virenerkennung nach Wildlist. Infos: http://www.gmx.net/virenschutz