FreeBSD 5.2.1-RELEASE-p3 spontaneous reboots

Wed Mar 24 01:52:35 PST 2004

Hi all,

I'm running 5.2.1-RELEASE-p3 on my server, but it reboots under heavy
(disk/cpu) load. The problem can be reproduced.
Running with my kernel or the GENERIC kernel makes no difference.
Unfortunately the crash dumps somehow don't work.

Here is some info about the server (Compaq Proliant 400, P3-550, 512Mb ECC
memory, 2x 18Gb with Mylex DAC-960 RAID 1):

FreeBSD defiant.unix-asp.com 5.2.1-RELEASE-p3 FreeBSD 5.2.1-RELEASE-p3 #9:
Mon Mar 22 12:51:19 CET 2004
root at defiant.unix-asp.com:/usr/obj/usr/src/sys/DEFIANT  i386

acpidump.txt available upon request.

defiant# less hw.acpi.txt
hw.acpi.supported_sleep_state:
hw.acpi.power_button_state: S5
hw.acpi.sleep_button_state: S1
hw.acpi.lid_switch_state: S1
hw.acpi.standby_state: S1
hw.acpi.suspend_state: S3
hw.acpi.sleep_delay: 5
hw.acpi.s4bios: 0
hw.acpi.verbose: 0
hw.acpi.disable_on_poweroff: 1
hw.acpi.reset_video: 1

Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
 The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE-p2 #8: Wed Mar 17 11:56:21 CET 2004
    root at defiant.unix-asp.com:/usr/obj/usr/src/sys/DEFIANT
Preloaded elf kernel "/boot/kernel/kernel" at 0xc082a000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc082a0cc.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium III/Pentium III Xeon/Celeron (497.84-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x673  Stepping = 3

Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,
PAT,PSE36,MMX,FXSR,SSE>
real memory  = 536870912 (512 MB)
avail memory = 511844352 (488 MB)
Pentium Pro MTRR support enabled
VESA: v2.0, 16384k memory, flags:0x1, mode table:0xc00c0cfd (c0000cfd)
VESA: S3 Incorporated. Savage4
    ACPI-0264: *** Error: Looking up [\\_SB_.PCI0.IBRG.ECP0] in namespace,
AE_NOT_FOUND
    ACPI-1287: *** Error: , AE_NOT_FOUND
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <COMPAQ CONTACT > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 6 entries at 0xc00edb90
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
    ACPI-0438: *** Error: Looking up [MLEN] in namespace, AE_NOT_FOUND
SearchNode 0xc1cea780 StartNode 0xc1cea780 ReturnNode 0
    ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0._CRS] (Node
0xc1cea780), AE_NOT_FOUND
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xf808-0xf80b on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 15 INTA is routed to irq 11
pcib0: slot 16 INTA is routed to irq 9
pcib0: slot 20 INTD is routed to irq 9
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0x44000000-0x47ffffff
at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcib0: slot 1 INTA is routed to irq 11
pcib1: slot 0 INTA is routed to irq 11
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <PCI-PCI bridge> at device 13.0 on pci0
pci2: <PCI bus> on pcib2
pcib0: slot 13 INTA is routed to irq 11
pcib2: slot 4 INTA is routed to irq 11
pcib0: slot 13 INTB is routed to irq 10
pcib2: slot 5 INTA is routed to irq 10
pcib0: slot 13 INTD is routed to irq 9
pcib2: slot 7 INTA is routed to irq 9
sym0: <895> port 0x1000-0x10ff mem
0x40100000-0x40100fff,0x40300000-0x403000ff irq 11 at device 4.0 on pci2
sym0: No NVRAM, ID 7, Fast-40, SE, parity checking
fxp0: <Intel 82558 Pro/100 Ethernet> port 0x1c00-0x1c1f mem
0x40000000-0x400fffff,0x40500000-0x40500fff irq 10 at device 5.0 on pci2
fxp0: Ethernet address 00:50:8b:2e:70:2d
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci2: <display, VGA> at device 6.0 (no driver attached)
pci2: <base peripheral> at device 7.0 (no driver attached)
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x2000-0x207f mem
0x42100000-0x4210007f irq 11 at device 15.0 on pci0
xl0: Ethernet address: 00:01:02:9c:3e:cc
miibus1: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus1
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
mlx0: <Mylex version 2 RAID interface> port 0x2080-0x20ff mem
0x42200000-0x4220007f irq 9 at device 16.0 on pci0
mlx0: DAC960P/PD, 2 channels, firmware 2.73-0-00, 32MB RAM
mlxd0: <Mylex System Drive> on mlx0
mlxd0: 17357MB (35547136 sectors) RAID 1 (online)
GEOM: create disk mlxd0 dp=0xc4794a8c
isab0: <PCI-ISA bridge> at device 20.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x2420-0x242f at device 20.1
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x2400-0x241f irq 9 at
device 20.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 20.3 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
orm0: <Option ROMs> at iomem
0xe0000-0xe7fff,0xd0000-0xd07ff,0xca000-0xcffff,0xc0000-0xc9fff on isa0
pmtimer0 on isa0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 497837655 Hz quality 800
Timecounters tick every 10.000 msec
IP Filter: v3.4.31 initialized.  Default = block all, Logging = enabled
acd0: CDROM <CD-ROM 40X/AKU> at ata0-slave PIO4
Waiting 5 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS mode change from SE to SE.
sa0 at sym0 bus 0 target 4 lun 0
sa0: <SONY SDT-5200 3.30> Removable Sequential Access SCSI-2 device 
sa0: 5.000MB/s transfers (5.000MHz, offset 8)
Mounting root from ufs:/dev/mlxd0s1a
WARNING: / was not properly dismounted
WARNING: /tmp was not properly dismounted
/tmp: mount pending error: blocks 992 files 0
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
WARNING: /var/ftp was not properly dismounted
WARNING: /home was not properly dismounted

met vriendelijke groet / with kind regards,

Remy de Ruysscher
 <blocked::mailto:rdr at xs4all.nl> rdr at xs4all.nl 
remy at unix-asp.com <blocked::mailto:remy at unix-asp.com> 

----

Microsoft: Where do you want to go today?
Linux: Where do you want to go tomorrow?
FreeBSD: Are you guys coming or what?
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/x-pkcs7-signature
Size: 3061 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-questions/attachments/20040324/f4ef4059/smime.bin