ISP Connection problem - ADSL

[Bryce]

Hi,

Im a freeBSD newbie & have been struggling for some
time to get my adsl connection working on Freebsd
5.2.1 Release. I've tried many suggested
configurations for /etc/ppp/ppp.conf, and /etc/rc.conf
& read relevant chapters from 'Complete FreeBSD' & the
handbook, but my connection still dies before reaching
the LCP phase. 

Im using an Alcatel Speedtouch 530 Modem connected to
Ethernet. My ADSL connection is fine in Windoze
however the configuration for the modem is usually set
through a web-browser. Do the modem settings(done via
browser) affect the connection in FBSD or does the
system simply take the settings from ppp.conf etc? Im
somewhat confused on this point. I can ping the modem
at 10.0.0.138 and can open the web interface in X.

The log reads:

Jun 25 20:00:26 brycepc ppp[801]: tun1: Phase: bundle:
Establish 
Jun 25 20:00:26 brycepc ppp[801]: tun1: Phase:
deflink: closed -> opening 
Jun 25 20:00:26 brycepc ppp[801]: tun1: Debug: List of
netgraph node ``sis0:'' (id 1) hooks: 
Jun 25 20:00:26 brycepc ppp[801]: tun1: Debug:   Found
orphans -> ethernet 
Jun 25 20:00:26 brycepc ppp[801]: tun1: Debug:
Connecting netgraph socket .:tun1 -> [3]::tun1 
Jun 25 20:00:26 brycepc ppp[801]: tun1: Debug: Sending
PPPOE_CONNECT to .:tun1 
Jun 25 20:00:26 brycepc ppp[801]: tun1: Debug: Found
the following interfaces: 
Jun 25 20:00:26 brycepc ppp[801]: tun1: Debug:  Index
1, name "sis0" 
Jun 25 20:00:26 brycepc ppp[801]: tun1: Debug:  Index
2, name "lp0" 
Jun 25 20:00:26 brycepc ppp[801]: tun1: Debug:  Index
3, name "lo0" 
Jun 25 20:00:26 brycepc ppp[801]: tun1: Debug:  Index
4, name "tun0" 
Jun 25 20:00:26 brycepc ppp[801]: tun1: Debug:  Index
5, name "tun1" 
Jun 25 20:00:26 brycepc ppp[801]: tun1: Phase:
deflink: Connected! 
Jun 25 20:00:26 brycepc ppp[801]: tun1: Phase:
deflink: opening -> dial 
Jun 25 20:00:26 brycepc ppp[801]: tun1: Chat: deflink:
Dial attempt 1 of 1 
Jun 25 20:00:26 brycepc ppp[801]: tun1: Phase:
deflink: dial -> carrier 
Jun 25 20:00:26 brycepc ppp[801]: tun1: Debug: Waiting
for carrier 
Jun 25 20:00:30 brycepc last message repeated 4 times
Jun 25 20:00:31 brycepc ppp[801]: tun1: Phase:
deflink: Disconnected! 
Jun 25 20:00:31 brycepc ppp[801]: tun1: Phase:
deflink: carrier -> hangup 
Jun 25 20:00:31 brycepc ppp[801]: tun1: Debug:
deflink: Close 
Jun 25 20:00:31 brycepc ppp[801]: tun1: Phase:
deflink: Connect time: 5 secs: 0 octets in, 0 octets
out 
Jun 25 20:00:31 brycepc ppp[801]: tun1: Phase:
deflink: 0 packets in, 0 packets out 

Any help is greatly appreciated I really would like to
end my reliance on M$ and get going with BSD :)

Bryce


		
__________________________________
Do you Yahoo!?
New and Improved Yahoo! Mail - Send 10MB messages!
http://promotions.yahoo.com/new_mail