ping command question
Bill Moran
wmoran at potentialtech.com
Mon Jun 21 05:28:22 PDT 2004
adrian kok <adriankok2000 at yahoo.com.hk> wrote:
> Hi all
>
> Do you know why the command "ping" in unix and window
> is different?
Yes.
> I start from one ISP to ping other ISP
>
> 1/ If the following result from window, it is good or
> not?
> lost = 7 within 3 thousand packets
No, that's not good. There's no reason to be losing any
packets, unless there's a network problems.
However, depending on who those two ISPs are and how far
away from each other, that may be acceptable.
> 2/ how do I kow the average ms is good or not?
Is it fast enough?
> 3/ Which one (unix or window) is best for testing?
The Unix one. Last I checked, the windows one rounded off
the RTTs, thus making it inaccurate for testing.
> Thank you very much for your advice
>
> Reply from 66.49.4.148: bytes=32 time=99ms TTL=57
> Reply from 66.49.4.148: bytes=32 time=109ms TTL=57
> Reply from 66.49.4.148: bytes=32 time=100ms TTL=57
> Reply from 66.49.4.148: bytes=32 time=95ms TTL=57
>
> Ping statistics for 66.49.4.148:
> Packets: Sent = 3534, Received = 3527, Lost = 7
> (0% loss),
> Approximate round trip times in milli-seconds:
> Minimum = 89ms, Maximum = 640ms, Average = 102ms
> Control-C
It seems like you've got a LOT of variation. Either your sharing that net
connection with a lot of other services, or you've got problems.
--
Bill Moran
Potential Technologies
http://www.potentialtech.com
More information about the freebsd-questions
mailing list