Vinum Problem(?)

Erik Mossberg omicron at krokk.org
Wed Jun 2 02:55:50 PDT 2004


Hello,

I have a really weird problem, I don't know if it is software or 
hardware related. When I am in the process of extracting a multivolume 
archive (rar) it goes on for a while, then stops, then continues and 
then all of the sudden the computer reboots.

The volume which I try to extract files on is a Vinum volume containing 
2 Western Digital 36gb SATA raptor disks (striped) connected via a 
Tekram TR822 SATA-controller. Upon reboot it complains about / not being 
properly unmounted, and fsck says something about SUPERBLK, or similar.

-------------
ws01-omi# vinum list
2 drives:
D vinumdrive1           State: up       /dev/ad6s1d     A: 0/35299 MB (0%)
D vinumdrive0           State: up       /dev/ad4s1d     A: 0/35299 MB (0%)

1 volumes:
V hm                    State: up       Plexes:       1 Size:         68 GB

1 plexes:
P hm.p0               S State: up       Subdisks:     2 Size:         68 GB

2 subdisks:
S hm.p0.s0              State: up       D: vinumdrive0  Size:         34 GB
S hm.p0.s1              State: up       D: vinumdrive1  Size:         34 GB

----------

Can this just be a h/w problem due to overheating? Even though the 
disks  don't feel very varm on touch.


I'm not completely sure what details might be needed, but heres my dmesg:

----------------------
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
    The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE-p8 #7: Wed May 26 22:11:10 CEST 2004
    root at ws01-omi.anime-only.net:/usr/obj/usr/src/sys/omi
Preloaded elf kernel "/boot/kernel/kernel" at 0xc084f000.
Preloaded elf module "/boot/kernel/snd_cmi.ko" at 0xc084f26c.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc084f318.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc084f3c4.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.53GHz (2558.53-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf24  Stepping = 4
  
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory  = 1073659904 (1023 MB)
avail memory = 1033490432 (985 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS   P4B533  > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 10 entries at 0xc00f2400
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 29 INTA is routed to irq 11
pcib0: slot 29 INTB is routed to irq 5
pcib0: slot 29 INTC is routed to irq 10
pcib0: slot 31 INTA is routed to irq 10
agp0: <Intel 82845 host to AGP bridge> mem 0xf8000000-0xfbffffff at 
device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib1: slot 0 INTA is routed to irq 11
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xd800-0xd81f 
irq 11 at device 29.0 on pci0
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ugen0: Logitech product 0x08b4, rev 1.10/0.03, addr 2
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xd400-0xd41f 
irq 5 at device 29.1 on pci0
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uscanner0: EPSON EPSON Scanner, rev 1.10/1.00, addr 2
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xd000-0xd01f 
irq 10 at device 29.2 on pci0
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib2: slot 10 INTA is routed to irq 9
pcib2: slot 11 INTA is routed to irq 9
pcm0: <CMedia CMI8738> port 0xb800-0xb8ff at device 3.0 on pci2
pcib2: slot 3 INTA is routed to irq 5
atapci0: <SiI 3112 SATA150 controller> port 
0xa000-0xa00f,0xa400-0xa403,0xa800-0xa807,0xb000-0xb003,0xb400-0xb407 
mem 0xed000000-0xed0001ff irq 9 at device 10.0 on pci2
atapci0: [MPSAFE]
ata2: at 0xed000000 on atapci0
ata2: [MPSAFE]
ata3: at 0xed000000 on atapci0
ata3: [MPSAFE]
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x9800-0x987f mem 
0xec800000-0xec80007f irq 9 at device 11.0 on pci2
xl0: Ethernet address: 00:04:75:c8:18:d8
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci2: <network> at device 12.0 (no driver attached)
pci2: <multimedia, audio> at device 14.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH4 UDMA100 controller> port 
0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-0x7 irq 10 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci1
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci1
ata1: [MPSAFE]
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
orm0: <Option ROMs> at iomem 0xd8000-0xd87ff,0xd0000-0xd47ff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2558533936 Hz quality 800
Timecounters tick every 10.000 msec
GEOM: create disk ad0 dp=0xc6a00a60
ad0: 117246MB <Maxtor 4G120J6> [238216/16/63] at ata0-master UDMA100
GEOM: create disk ad1 dp=0xc6a00e60
ad1: 117246MB <Maxtor 4G120J6> [238216/16/63] at ata0-slave UDMA100
acd0: CDRW <LG CD-RW CED-8120B> at ata1-master PIO4
acd1: DVDR <PIONEER DVD-RW DVR-104> at ata1-slave PIO4
GEOM: create disk ad4 dp=0xc6a00c60
ad4: 35304MB <WDC WD360GD-00FNA0> [71730/16/63] at ata2-master UDMA100
GEOM: create disk ad6 dp=0xc6b55960
ad6: 35304MB <WDC WD360GD-00FNA0> [71730/16/63] at ata3-master UDMA100
Mounting root from ufs:/dev/ad0s2a
WARNING: / was not properly dismounted
---------------------

Regards,
Erik


More information about the freebsd-questions mailing list