can not make ltmdm ports
User &
pirat at access.inet.co.th
Fri Jul 30 15:15:21 PDT 2004
On Saturday, 26 June 2004 at 8:35:53 +0700, pirat wrote:
> Date: Sat, 26 Jun 2004 08:35:53 +0700
> From: pirat <pirat at access.inet.co.th>
> To: freebsd-questions at freebsd.org
> Cc: freebsd-stable at freebsd.org
> Subject: can not make ltmdm ports
>
> hi sirs,
>
> my laptop is dell inspiron 1100 with Conexant D480 MDC modem controller.
> i tried to compile ltmdm from ports but strange enough, it failed. i spent
> about 2 months in looking or searching from internet if there were
> any one else can use that modem in that machin with freebsd.
>
> finally, i have to come back to my box and decide to make from ports.
> as mentioned above, make failed. can any one please helps me or explains me
> why do make failed ?
>
> other informations about dell inspiron 1100 are attached.
> thanks in advanced fro any helps and hints.
>
>
> --
> with best regards,
> psr
>
> http://www.thai-aec.org
> http://www.thai.net/makham
> >From root at inspiron.thai-aec.org Sat Jun 26 08:13:35 2004
> Return-Path: <root at inspiron.thai-aec.org>
> Received: from inspiron.thai-aec.org (inspiron.thai-aec.org [192.168.1.70])
> by firak.thai-aec.org (8.12.11/8.12.11) with ESMTP id i5Q1DZmA022143
> for <pirat at firak.thai-aec.org>; Sat, 26 Jun 2004 08:13:35 +0700 (ICT)
> (envelope-from root at inspiron.thai-aec.org)
> Received: from inspiron.thai-aec.org (localhost [127.0.0.1])
> by inspiron.thai-aec.org (8.12.11/8.12.11) with ESMTP id i5Q17ZHP001148
> for <pirat at firak.thai-aec.org>; Sat, 26 Jun 2004 08:07:35 +0700 (ICT)
> (envelope-from root at inspiron.thai-aec.org)
> Received: (from root at localhost)
> by inspiron.thai-aec.org (8.12.11/8.12.11/Submit) id i5Q17Y9b001147
> for pirat at firak.thai-aec.org; Sat, 26 Jun 2004 08:07:34 +0700 (ICT)
> (envelope-from root)
> Date: Sat, 26 Jun 2004 08:07:34 +0700 (ICT)
> From: Charlie Root <root at inspiron.thai-aec.org>
> Message-Id: <200406260107.i5Q17Y9b001147 at inspiron.thai-aec.org>
> To: pirat at firak.thai-aec.org
> Status: RO
> Content-Length: 2910
> Lines: 64
>
> hostb0 at pci0:0:0: class=0x060000 card=0x00000000 chip=0x25608086 rev=0x03 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82845G/GL/GV/GE/PE DRAM Controller / Host-Hub I/F Bridge'
> class = bridge
> subclass = HOST-PCI
> agp0 at pci0:2:0: class=0x030000 card=0x01491028 chip=0x25628086 rev=0x03 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82845G/GL/GV/GE/PE Integrated Graphics Device'
> class = display
> subclass = VGA
> uhci0 at pci0:29:0: class=0x0c0300 card=0x24c08086 chip=0x24c28086 rev=0x02 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801DB/DBM (ICH4/M) USB UHCI Controller #1'
> class = serial bus
> subclass = USB
> uhci1 at pci0:29:1: class=0x0c0300 card=0x24c08086 chip=0x24c48086 rev=0x02 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801DB/DBM (ICH4/M) USB UHCI Controller #2'
> class = serial bus
> subclass = USB
> uhci2 at pci0:29:2: class=0x0c0300 card=0x24c08086 chip=0x24c78086 rev=0x02 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801DB/DBM (ICH4/M) USB UHCI Controller #3'
> class = serial bus
> subclass = USB
> none0 at pci0:29:7: class=0x0c0320 card=0x24c08086 chip=0x24cd8086 rev=0x02 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801DB/DBM (ICH4/M) USB EHCI Controller'
> class = serial bus
> subclass = USB
> pcib1 at pci0:30:0: class=0x060400 card=0x00000000 chip=0x244e8086 rev=0x82 hdr=0x01
> vendor = 'Intel Corporation'
> device = '82801BA/CA/DB/EB/ER (ICH2/3/4/5/5R) Hub Interface to PCI Bridge'
> class = bridge
> subclass = PCI-PCI
> isab0 at pci0:31:0: class=0x060100 card=0x00000000 chip=0x24c08086 rev=0x02 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801DB (ICH4) LPC Interface Bridge'
> class = bridge
> subclass = PCI-ISA
> atapci0 at pci0:31:1: class=0x01018a card=0x24c08086 chip=0x24cb8086 rev=0x02 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801DB (ICH4) UltraATA/100 EIDE Controller'
> class = mass storage
> subclass = ATA
> pcm0 at pci0:31:5: class=0x040100 card=0x01491028 chip=0x24c58086 rev=0x02 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801DB/DBM (ICH4/M) AC'97 Audio Controller'
> class = multimedia
> subclass = audio
>
> none1 at pci0:31:6: class=0x070300 card=0x542214f1 chip=0x24c68086 rev=0x02 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801DB/DBM (ICH4/M) AC'97 Modem Controller'
> class = simple comms
>
> bfe0 at pci2:1:0: class=0x020000 card=0x10284401 chip=0x440114e4 rev=0x01 hdr=0x00
> vendor = 'Broadcom Corporation'
> device = 'BCM440x 10/100 Integrated Ethernet Controller'
> class = network
> subclass = ethernet
> cbb0 at pci2:4:0: class=0x060700 card=0x01491028 chip=0xac56104c rev=0x00 hdr=0x02
> vendor = 'Texas Instruments (TI)'
> device = 'PCI1510 PC card CardBus Controller'
> class = bridge
> subclass = PCI-CardBus
>
>
> /usr/ports/comms/ltmdm# uname -a
> FreeBSD inspiron.thai-aec.org 5.2-CURRENT FreeBSD 5.2-CURRENT #1: Tue Jun 22 16:41:37 ICT 2004 pirat at inspiron.thai-aec.org:/usr/obj/usr/src/sys/INSPIRON i386
>
> /usr/ports/comms/ltmdm# dmesg
>
> Copyright (c) 1992-2004 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD 5.2-CURRENT #1: Tue Jun 22 16:41:37 ICT 2004
> pirat at inspiron.thai-aec.org:/usr/obj/usr/src/sys/INSPIRON
> Preloaded elf kernel "/boot/kernel/kernel" at 0xc08d3000.
> Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc08d31f4.
> Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc08d32a0.
> Preloaded acpi_dsdt "/boot/Dell.aml" at 0xc08d334c.
> Preloaded elf module "/boot/kernel/acpi.ko" at 0xc08d3390.
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Celeron(R) CPU 2.20GHz (2192.89-MHz 686-class CPU)
> Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
> Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
> real memory = 267161600 (254 MB)
> avail memory = 251756544 (240 MB)
> random: <entropy source, Software, Yarrow>
> Pentium Pro MTRR support enabled
> ACPI: DSDT was overridden.
> ACPI-0374: *** Info: Table [DSDT] replaced by host OS
> npx0: [FAST]
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> acpi0: <DELL CPi R > on motherboard
> acpi0: [GIANT-LOCKED]
> pcibios: BIOS version 2.10
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
> cpu0: <ACPI CPU> on acpi0
> acpi_tz0: <Thermal Zone> on acpi0
> acpi_acad0: <AC Adapter> on acpi0
> acpi_cmbat0: <Control Method Battery> on acpi0
> acpi_lid0: <Control Method Lid Switch> on acpi0
> acpi_button0: <Power Button> on acpi0
> acpi_button1: <Sleep Button> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib0: slot 2 INTA is routed to irq 11
> pcib0: slot 29 INTA is routed to irq 11
> pcib0: slot 29 INTB is routed to irq 11
> pcib0: slot 29 INTC is routed to irq 11
> pcib0: slot 29 INTD is routed to irq 11
> pcib0: slot 31 INTB is routed to irq 11
> pcib0: slot 31 INTB is routed to irq 11
> agp0: <Intel 82845G (845G GMCH) SVGA controller> mem 0xf6f80000-0xf6ffffff,0xe0000000-0xe7ffffff irq 11 at device 2.0 on pci0
> agp0: detected 892k stolen memory
> agp0: aperture size is 128M
> uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xbf80-0xbf9f irq 11 at device 29.0 on pci0
> uhci0: [GIANT-LOCKED]
> usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xbf40-0xbf5f irq 11 at device 29.1 on pci0
> uhci1: [GIANT-LOCKED]
> usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
> usb1: USB revision 1.0
> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xbf20-0xbf3f irq 11 at device 29.2 on pci0
> uhci2: [GIANT-LOCKED]
> usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
> usb2: USB revision 1.0
> uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> pci0: <serial bus, USB> at device 29.7 (no driver attached)
> pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci2: <ACPI PCI bus> on pcib1
> pcib1: slot 1 INTA is routed to irq 11
> bfe0: <Broadcom BCM4401 Fast Ethernet> mem 0xfcffe000-0xfcffffff irq 11 at device 1.0 on pci2
> miibus0: <MII bus> on bfe0
> bmtphy0: <BCM4401 10/100baseTX PHY> on miibus0
> bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> bfe0: Ethernet address: 00:0d:56:31:fe:79
> bfe0: [GIANT-LOCKED]
> cbb0: <TI1510 PCI-CardBus Bridge> at device 4.0 on pci2
> cardbus0: <CardBus bus> on cbb0
> pccard0: <16-bit PCCard bus> on cbb0
> pcib1: slot 4 INTA is routed to irq 11
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel ICH4 UDMA100 controller> port 0xbfa0-0xbfaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
> ata0: at 0x1f0 irq 14 on atapci0
> ata1: at 0x170 irq 15 on atapci0
> pcm0: <Intel ICH4 (82801DB)> port 0xcc40-0xcc7f,0xc800-0xc8ff mem 0xf6f7f400-0xf6f7f4ff,0xf6f7f800-0xf6f7f9ff irq 11 at device 31.5 on pci0
> pcm0: [GIANT-LOCKED]
> pcm0: <SigmaTel STAC9750/51 AC97 Codec>
> pci0: <simple comms> at device 31.6 (no driver attached)
> atkbdc0: <Keyboard controller (i8042)> port 0x66,0x62,0x64,0x60 irq 1 on acpi0
> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> psm0: <PS/2 Mouse> flags 0x1000 irq 12 on atkbdc0
> psm0: [GIANT-LOCKED]
> psm0: model Generic PS/2 mouse, device ID 0
> orm0: <Option ROMs> at iomem 0xcf800-0xcffff,0xcf000-0xcf7ff,0xce800-0xcefff,0xce000-0xce7ff,0xcd800-0xcdfff,0xcd000-0xcd7ff,0xcc800-0xccfff,0xc0000-0xcc7ff on isa0
> pmtimer0 on isa0
> ppc0: parallel port not found.
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> Timecounter "TSC" frequency 2192893820 Hz quality 800
> Timecounters tick every 10.000 msec
> acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
> acd0: CDROM <LG CD-ROM CRN-8245B> at ata0-master PIO4
> ad2: 38154MB <IC25N040ATMR04-0> [77520/16/63] at ata1-master UDMA100
> Mounting root from ufs:/dev/ad2s1a
> pid 443 (845patch): trap 9 with interrupts disabled
> pid 443 (845patch): trap 9 with interrupts disabled
> pid 443 (845patch): trap 9 with interrupts disabled
> pid 443 (845patch): trap 9 with interrupts disabled
> pid 443 (845patch): trap 9 with interrupts disabled
> pid 443 (845patch): trap 9 with interrupts disabled
> pid 443 (845patch): trap 9 with interrupts disabled
> pid 443 (845patch): trap 9 with interrupts disabled
> pid 443 (845patch): trap 9 with interrupts disabled
>
> Script done on Sat Jun 26 08:10:59 2004
>
On Saturday, 26 June 2004 at 6:56:54 +0300, Stas D. Myasnikov wrote:
> From: "Stas D. Myasnikov" <myst at tut.by>
> Subject: Re: can not make ltmdm ports
> To: pirat <pirat at access.inet.co.th>
> X-Mailer: CommuniGate Pro WebUser Interface v.4.1.8
> Date: Sat, 26 Jun 2004 06:56:54 +0300
>
> >> > my laptop is dell inspiron 1100 with Conexant D480 MDC modem
> >> > controller. i tried to compile ltmdm from ports but strange
> >> > enough, it failed. i spent about 2 months in looking or
> >>
> >> Are you sure that your modem controller (Conexant) is supported by
> >> ltmdm port? AFAIK it only supports Xircom and Lucent controllers.
> >
> >in this case i really do no know.
>
> I think it hardly will work for you but...
>
> >> > searching from internet if there were any one else can use
> >> > that modem in that machin with freebsd.
> >> > finally, i have to come back to my box and decide to make
> >> > from ports. as mentioned above, make failed. can any one
> >> > please helps me or explains me why do make failed?
> >>
> >> To answer this question it will be good to see the output of
> >> failed make.
> >
> >yes, please have a look at an attachment.
>
> a-ha! For what I can see: you tarball is ok, since checksum is ok (I
> use the same tarball and for me it worked without a question), so
> the bug is in patches I think. The best what you can do is to
> cvsup the ports or simply download this port (not the source tarball),
> and put it into ports inplace of old one. And try to make once more.
>
> Have a nice day.
>
On Saturday, 26 June 2004 at 9:07:35 -0400, JJB wrote:
> From: "JJB" <Barbish3 at adelphia.net>
> To: "pirat" <pirat at access.inet.co.th>
> Subject: RE: can not make ltmdm ports
> Date: Sat, 26 Jun 2004 09:07:35 -0400
> X-Mailer: Microsoft Outlook IMO, Build 9.0.6604 (9.0.2911.0)
>
> Psr;
>
> You have couple different problems with what you are trying to do.
> First you are running 5.2. This was an very dirty development
> version release that has been withdrawn and is not supported. Second
> the 5.x versions are all from the development branch and contain
> untested new code. 5.x versions are intended only for users who can
> debug kernel code to help the developers burn in new code. This does
> not sound like you. You should be using the 4.10 stable release.
>
> Next the ltmdm port is not the blanket solution for all winmodem
> usage on FBSD. FBSD does not work with winmodems period. The ltmdm
> port only works for an limited number of winmodems that use chips
> manufactured by lucent and them only for some of the older lucent
> chips versions. FBSD only works with PCI modems with onboard DSP
> and controllers or external serial modems.
>
> I see you are from Thailand. I am moving to Pattata Thailand as soon
> as my house here sells. Where are you located?
>
> Joe
>
On Sunday, 27 June 2004 at 14:08:06 +0930, Daniel O'Connor wrote:
> From: "Daniel O'Connor" <doconnor at gsoft.com.au>
> To: freebsd-stable at freebsd.org
> Subject: Re: can not make ltmdm ports
> Date: Sun, 27 Jun 2004 14:08:06 +0930
> Cc: pirat <pirat at access.inet.co.th>, freebsd-questions at freebsd.org
>
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> On Sat, 26 Jun 2004 11:05, pirat wrote:
> > my laptop is dell inspiron 1100 with Conexant D480 MDC modem controller.
> > i tried to compile ltmdm from ports but strange enough, it failed. i spent
> > about 2 months in looking or searching from internet if there were
> > any one else can use that modem in that machin with freebsd.
>
> That modem isn't supported by the ltmdm port (and never will be)
>
> > finally, i have to come back to my box and decide to make from ports.
> > as mentioned above, make failed. can any one please helps me or explains
> > me why do make failed ?
>
> Recent changes to the kernel broke it, I have a patch, but as I said above it
> won't help you anyway.
>
> PS if you'd asked me (as the port maintainer) directly I could have answered
> it faster.
>
> - --
> Daniel O'Connor software and network engineer
> for Genesis Software - http://www.gsoft.com.au
> "The nice thing about standards is that there
> are so many of them to choose from."
> -- Andrew Tanenbaum
> GPG Fingerprint - 5596 B766 97C0 0E94 4347 295E E593 DC20 7B3F CE8C
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.2.4 (FreeBSD)
>
hi sirs,
sorry for a very long delay in answering since i had a nuclear and
radiological trainging and exercises for a week and had problems
with my isp for sending e-mail.
thanks to all helps and hints passed to me indeed. my purpose is that
i want to write that driver as my hobby(?) during the last 10 years
of working. so that i need to have as much informations as possible.
may be that the driver violates some of freebsd security or stability
but once i have any progression, i will inform this lovely community.
once again thanks to all helps and suggestions and welcome to any one
who may come to thailand.
--
with best regards,
psr
http://www.thai-aec.org
http://www.thai.net/makham
More information about the freebsd-questions
mailing list