floppy drive not configured

[Aggelos]

I just intalled freebsd 5.2.1-RELEASE, and cannot access my floppy disk 
drive, as you can see from attached dmesg.
(fdc0: cannot reserve I/O port range...)
-------------- next part --------------
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE #0: Mon Feb 23 20:45:55 GMT 2004
    root at wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a35000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a351f4.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium III/Pentium III Xeon/Celeron (451.02-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x673  Stepping = 3
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 335478784 (319 MB)
avail memory = 316243968 (301 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ABIT   AWRDACPI> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 8 entries at 0xc00fdef0
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
    ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.ISA_.FDC0._CRS] (Node 0xc33e8d60), AE_AML_UNINITIALIZED_LOCAL
    ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.ISA_.FDC0._CRS] (Node 0xc33e8d60), AE_AML_UNINITIALIZED_LOCAL
can't fetch resources for \\_SB_.PCI0.ISA_.FDC0 - AE_AML_UNINITIALIZED_LOCAL
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x5000-0x500f,0x4000-0x4041,0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 7 INTD is routed to irq 10
pcib0: slot 11 INTA is routed to irq 11
pcib0: slot 19 INTA is routed to irq 11
pcib0: slot 19 INTB is routed to irq 11
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xd0000000-0xd3ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcib0: slot 1 INTA is routed to irq 9
pcib1: slot 0 INTA is routed to irq 9
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xd000-0xd01f irq 10 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xd400-0xd47f mem 0xd9000000-0xd900007f irq 11 at device 11.0 on pci0
xl0: Ethernet address: 00:10:4b:45:63:b8
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atapci1: <HighPoint HPT366 UDMA66 controller> port 0xe000-0xe0ff,0xdc00-0xdc03,0xd800-0xd807 irq 11 at device 19.0 on pci0
atapci1: [MPSAFE]
ata2: at 0xd800 on atapci1
ata2: [MPSAFE]
atapci2: <HighPoint HPT366 UDMA66 controller> port 0xec00-0xecff,0xe800-0xe803,0xe400-0xe407 irq 11 at device 19.1 on pci0
atapci2: [MPSAFE]
ata3: at 0xe400 on atapci2
ata3: [MPSAFE]
fdc0: cannot reserve I/O port range (1 ports)
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
fdc0: cannot reserve I/O port range (1 ports)
orm0: <Option ROMs> at iomem 0xd0000-0xd17ff,0xc0000-0xcffff on isa0
pmtimer0 on isa0
fdc0: cannot reserve I/O port range (6 ports)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 451024533 Hz quality 800
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
GEOM: create disk ad0 dp=0xc34c8a60
ad0: 4121MB <Maxtor 90432D2> [8374/16/63] at ata0-master UDMA33
GEOM: create disk ad1 dp=0xc34c8760
ad1: 3079MB <QUANTUM FIREBALL ST3.2A> [6256/16/63] at ata0-slave UDMA33
acd0: CDROM <CD-532E-B> at ata1-master PIO4
GEOM: create disk ad4 dp=0xc3444c60
ad4: 19092MB <WDC WD200EB-00CSF0> [38792/16/63] at ata2-master UDMA66
GEOM: create disk ad6 dp=0xc34dcc60
ad6: 8063MB <QUANTUM FIREBALL CR8.4A> [16383/16/63] at ata3-master UDMA66
Mounting root from ufs:/dev/ad1s1a