kernel compile error
rfa at msumain.edu.ph
rfa at msumain.edu.ph
Sat Feb 28 16:30:34 PST 2004
Im kinda new at this and
I was compiling my kernel on my Dell Inspiron600m running FreeBSD 5.2
RELEASE when I just remembered[after taking a nap] that I did
#make buildkernel KERNCONF=GENERIC
and I forgot to edit the /usr/src/sys/i386/conf/GENERIC file before
running the process.
anyway, the #make buildkernel completed and i wanted to change the GENERIC
file so i went aroung and commented out all the stuff that i didnt have on
my system and did a #make buildkernel KERNCONF=GENERIC again only to have
errors after about a minute into the process.
My Questions Are:
Is it wrong to do this process again after a successful #make buildkernel?
If so, what should I do to do it successfully? [should i rm -rf /usr/src
&& cvsup -g -L 2 /etc/standard-supfile && make world again?]
Or is it possible that my GENERIC file is wrong?
Here is the GENERIC file[The error output will follow]:
machine i386
#cpu I486_CPU
#cpu I586_CPU
cpu I686_CPU
ident GENERIC
# To statically compile in device wiring instead of /boot/device.hints
#hints "GENERIC.hints" # Default places to look for devices.
makeoptions DEBUG=-g # Build kernel with gdb(1) debug
symbols
options SCHED_ULE # ULE scheduler
options INET # InterNETworking
options INET6 # IPv6 communications protocols
options FFS # Berkeley Fast Filesystem
options SOFTUPDATES # Enable FFS soft updates support
options UFS_ACL # Support for access control lists
options UFS_DIRHASH # Improve performance on big
directories
options MD_ROOT # MD is a potential root device
options NFSCLIENT # Network Filesystem Client
options NFSSERVER # Network Filesystem Server
options NFS_ROOT # NFS usable as /, requires NFSCLIENT
options MSDOSFS # MSDOS Filesystem
options CD9660 # ISO 9660 Filesystem
options PROCFS # Process filesystem (requires
PSEUDOFS)
options PSEUDOFS # Pseudo-filesystem framework
options COMPAT_43 # Compatible with BSD 4.3 [KEEP
THIS!]
options COMPAT_FREEBSD4 # Compatible with FreeBSD4
options SCSI_DELAY=15000 # Delay (in ms) before probing SCSI
options KTRACE # ktrace(1) support
options SYSVSHM # SYSV-style shared memory
options SYSVMSG # SYSV-style message queues
options SYSVSEM # SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time
extensions
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~128k to driver.
options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~215k to driver.
options PFIL_HOOKS # pfil(9) framework
# Debugging for use in -current
options DDB # Enable the kernel debugger
options INVARIANTS # Enable calls of extra sanity
checking
options INVARIANT_SUPPORT # Extra sanity checks of internal
structures, required by INVARIANTS
options WITNESS # Enable checks to detect
deadlocks and cycles
options WITNESS_SKIPSPIN # Don't run witness on spinlocks
for speed
# To make an SMP kernel, the next two are needed
#options SMP # Symmetric MultiProcessor Kernel
device apic # I/O APIC
device isa
#device eisa
device pci
# Floppy drives
#device fdc
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
#device ataraid # ATA RAID drives
device atapicd # ATAPI CDROM drives
#device atapifd # ATAPI floppy drives
#device atapist # ATAPI tape drives
options ATA_STATIC_ID # Static device numbering
# SCSI Controllers
#device ahb # EISA AHA1742 family
#device ahc # AHA2940 and onboard AIC7xxx devices
#device ahd # AHA39320/29320 and onboard AIC79xx devices
#device amd # AMD 53C974 (Tekram DC-390(T))
#device isp # Qlogic family
device mpt # LSI-Logic MPT-Fusion
#device ncr # NCR/Symbios Logic
#device sym # NCR/Symbios Logic (newer chipsets +
those of `ncr')
#device trm # Tekram DC395U/UW/F DC315U adapters
#device adv # Advansys SCSI adapters
#device adw # Advansys wide SCSI adapters
#device aha # Adaptec 154x SCSI adapters
#device aic # Adaptec 15[012]x SCSI adapters,
AIC-6[23]60.
#device bt # Buslogic/Mylex MultiMaster SCSI adapters
#device ncv # NCR 53C500
#device nsp # Workbit Ninja SCSI-3
#device stg # TMC 18C30/18C50
# SCSI peripherals
#device scbus # SCSI bus (required for SCSI)
#device ch # SCSI media changers
#device da # Direct Access (disks)
#device sa # Sequential Access (tape etc)
#device cd # CD
#device pass # Passthrough device (direct SCSI access)
#device ses # SCSI Environmental Services (and SAF-TE)
# RAID controllers interfaced to the SCSI subsystem
#device amr # AMI MegaRAID
#device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
#device ciss # Compaq Smart RAID 5*
#device dpt # DPT Smartcache III, IV - See NOTES for
options
#device iir # Intel Integrated RAID
#device ips # IBM (Adaptec) ServeRAID
#device mly # Mylex AcceleRAID/eXtremeRAID
# RAID controllers
#device aac # Adaptec FSA RAID
#device aacp # SCSI passthrough for aac (requires CAM)
#device ida # Compaq Smart RAID
#device mlx # Mylex DAC960 family
#device pst # Promise Supertrak SX6000
#device twe # 3ware ATA RAID
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
#device psm # PS/2 mouse
device vga # VGA video card driver
device splash # Splash screen and screen saver support
# syscons is the default console driver, resembling an SCO console
device sc
# Enable this for the pcvt (VT220 compatible) console driver
#device vt
#options XSERVER # support for X server on a vt console
#options FAT_CURSOR # start with block cursor
device agp # support several AGP chipsets
# Floating point support - do not disable.
device npx
# Power management support (see NOTES for more options)
#device apm
# Add suspend/resume support for the i8254.
device pmtimer
# PCCARD (PCMCIA) support
# PCMCIA and cardbus bridge support
#device cbb # cardbus (yenta) bridge
#device pcic # ExCA ISA and PCI bridges
#device pccard # PC Card (16-bit) bus
#device cardbus # CardBus (32-bit) bus
# Serial (COM) ports
device sio # 8250, 16[45]50 based serial ports
# Parallel port
device ppc
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# If you've got a "dumb" serial or parallel PCI card that is
# supported by the puc(4) glue driver, uncomment the following
# line to enable it (connects to the sio and/or ppc drivers):
#device puc
# PCI Ethernet NICs.
#device de # DEC/Intel DC21x4x (``Tulip'')
#device em # Intel PRO/1000 adapter Gigabit Ethernet
Card
#device txp # 3Com 3cR990 (``Typhoon'')
#device vx # 3Com 3c590, 3c595 (``Vortex'')
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
device bfe # Broadcom BCM440x 10/100 ethernet
device bge # Broadcom BCM570xx Gigabit Ethernet
#device dc # DEC/Intel 21143 and various workalikes
#device fxp # Intel EtherExpress PRO/100B (82557, 82558)
#device pcn # AMD Am79C97x PCI 10/100 (precedence over
'lnc')
#device re # RealTek 8139C+/8169/8169S/8110S
#device rl # RealTek 8129/8139
#device sf # Adaptec AIC-6915 (``Starfire'')
#device sis # Silicon Integrated Systems SiS 900/SiS 7016
#device sk # SysKonnect SK-984x and SK-982x gigabit
ethernet
#device ste # Sundance ST201 (D-Link DFE-550TX)
#device ti # Alteon Networks Tigon I/II gigabit ethernet
#device tl # Texas Instruments ThunderLAN
#device tx # SMC EtherPower II (83c170 ``EPIC'')
#device vr # VIA Rhine, Rhine II
#device wb # Winbond W89C840F
#device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
# ISA Ethernet NICs. pccard NICs included.
#device cs # Crystal Semiconductor CS89x0 NIC
# 'device ed' requires 'device miibus'
#device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards
#device ex # Intel EtherExpress Pro/10 and Pro/10+
#device ep # Etherlink III based cards
#device fe # Fujitsu MB8696x based cards
#device ie # EtherExpress 8/16, 3C507, StarLAN 10 etc.
#device lnc # NE2100, NE32-VL Lance Ethernet cards
#device sn # SMC's 9000 series of ethernet chips
#device xe # Xircom pccard ethernet
# ISA devices that use the old ISA shims
#device le
# Wireless NIC cards
#device wlan # 802.11 support
#device an # Aironet 4500/4800 802.11 wireless NICs.
#device awi # BayStack 660 and others
#device wi # WaveLAN/Intersil/Symbol 802.11 wireless
NICs.
#device wl # Older non 802.11 Wavelan wireless NIC.
# Pseudo devices - the number indicates how many units to allocate.
device random # Entropy device
device loop # Network loopback
device ether # Ethernet support
device sl # Kernel SLIP
device ppp # Kernel PPP
device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
device md # Memory "disks"
device gif # IPv6 and IPv4 tunneling
device faith # IPv6-to-IPv4 relaying (translation)
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
device bpf # Berkeley packet filter
# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device usb # USB Bus (required)
#device udbp # USB Double Bulk Pipe devices
device ugen # Generic
device uhid # "Human Interface Devices"
device ukbd # Keyboard
device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and da
device ums # Mouse
#device urio # Diamond Rio 500 MP3 player
#3device uscanner # Scanners
# USB Ethernet, requires mii
#device aue # ADMtek USB ethernet
#device axe # ASIX Electronics USB ethernet
#device cue # CATC USB ethernet
#device kue # Kawasaki LSI USB ethernet
# FireWire support
#device firewire # FireWire bus code
#device sbp # SCSI over FireWire (Requires scbus and da)
#device fwe # Ethernet over FireWire (non-standard!)
AND HERE ARE THE ERRORS:
linking kernel.debug
mpt_freebsd.o: In function `mpt_cam_attach':
/usr/src/sys/dev/mpt/mpt_freebsd.c:60: undefined reference to
`cam_simq_alloc'
/usr/src/sys/dev/mpt/mpt_freebsd.c:68: undefined reference to `cam_sim_alloc'
/usr/src/sys/dev/mpt/mpt_freebsd.c:71: undefined reference to `cam_simq_free'
/usr/src/sys/dev/mpt/mpt_freebsd.c:79: undefined reference to
`xpt_bus_register'
mpt_freebsd.o: In function `mpt_cam_attach':
/usr/src/sys/cam/cam_sim.h:106: undefined reference to `xpt_create_path'
/usr/src/sys/cam/cam_sim.h:106: undefined reference to `xpt_bus_deregister'
mpt_freebsd.o: In function `mpt_cam_attach':
/usr/src/sys/dev/mpt/mpt_freebsd.c:87: undefined reference to `cam_sim_free'
mpt_freebsd.o: In function `mpt_cam_detach':
/usr/src/sys/dev/mpt/mpt_freebsd.c:97: undefined reference to `xpt_free_path'
mpt_freebsd.o: In function `mpt_cam_detach':
/usr/src/sys/cam/cam_sim.h:106: undefined reference to `xpt_bus_deregister'
mpt_freebsd.o: In function `mpt_cam_detach':
/usr/src/sys/dev/mpt/mpt_freebsd.c:99: undefined reference to `cam_sim_free'
mpt_freebsd.o: In function `mpttimeout':
/usr/src/sys/dev/mpt/mpt_freebsd.c:163: undefined reference to `xpt_done'
mpt_freebsd.o: In function `mpt_execute_req':
/usr/src/sys/dev/mpt/mpt_freebsd.c:211: undefined reference to
`xpt_freeze_devq'
/usr/src/sys/dev/mpt/mpt_freebsd.c:219: undefined reference to `xpt_done'
/usr/src/sys/dev/mpt/mpt_freebsd.c:362: undefined reference to `xpt_done'
mpt_freebsd.o: In function `mpt_start':
/usr/src/sys/dev/mpt/mpt_freebsd.c:398: undefined reference to
`xpt_freeze_simq'
/usr/src/sys/dev/mpt/mpt_freebsd.c:405: undefined reference to `xpt_done'
/usr/src/sys/dev/mpt/mpt_freebsd.c:508: undefined reference to
`xpt_freeze_simq'
mpt_freebsd.o: In function `mpt_done':
/usr/src/sys/dev/mpt/mpt_freebsd.c:1004: undefined reference to
`xpt_freeze_devq'
/usr/src/sys/dev/mpt/mpt_freebsd.c:1018: undefined reference to `xpt_done'
mpt_freebsd.o: In function `mpt_action':
/usr/src/sys/dev/mpt/mpt_freebsd.c:1057: undefined reference to
`xpt_freeze_simq'
/usr/src/sys/dev/mpt/mpt_freebsd.c:1103: undefined reference to `xpt_done'
/usr/src/sys/dev/mpt/mpt_freebsd.c:1413: undefined reference to
`cam_calc_geometry'
/usr/src/sys/dev/mpt/mpt_freebsd.c:1414: undefined reference to `xpt_done'
/usr/src/sys/dev/mpt/mpt_freebsd.c:1450: undefined reference to `xpt_done'
umass.o: In function `umass_cam_attach_sim':
/usr/src/sys/dev/usb/umass.c:2124: undefined reference to `cam_simq_alloc'
/usr/src/sys/dev/usb/umass.c:2128: undefined reference to `cam_sim_alloc'
/usr/src/sys/dev/usb/umass.c:2136: undefined reference to `cam_simq_free'
/usr/src/sys/dev/usb/umass.c:2140: undefined reference to `xpt_bus_register'
umass.o: In function `umass_cam_rescan_callback':
/usr/src/sys/dev/usb/umass.c:2161: undefined reference to `xpt_free_path'
umass.o: In function `umass_cam_rescan':
/usr/src/sys/cam/cam_sim.h:106: undefined reference to `xpt_periph'
/usr/src/sys/cam/cam_sim.h:106: undefined reference to `xpt_create_path'
umass.o: In function `umass_cam_rescan':
/usr/src/sys/dev/usb/umass.c:2184: undefined reference to `xpt_setup_ccb'
/usr/src/sys/dev/usb/umass.c:2188: undefined reference to `xpt_action'
umass.o: In function `umass_cam_detach_sim':
/usr/src/sys/cam/cam_sim.h:106: undefined reference to `xpt_bus_deregister'
umass.o: In function `umass_cam_detach_sim':
/usr/src/sys/dev/usb/umass.c:2232: undefined reference to `cam_sim_free'
umass.o: In function `umass_cam_action':
/usr/src/sys/dev/usb/umass.c:2412: undefined reference to `xpt_done'
/usr/src/sys/dev/usb/umass.c:2506: undefined reference to `cam_calc_geometry'
/usr/src/sys/dev/usb/umass.c:2507: undefined reference to `xpt_done'
/usr/src/sys/dev/usb/umass.c:2530: undefined reference to `xpt_done'
umass.o: In function `umass_cam_cb':
/usr/src/sys/dev/usb/umass.c:2622: undefined reference to `xpt_done'
umass.o: In function `umass_cam_sense_cb':
/usr/src/sys/dev/usb/umass.c:2717: undefined reference to `xpt_done'
umass.o: In function `umass_cam_quirk_cb':
/usr/src/sys/dev/usb/umass.c:2739: undefined reference to `xpt_done'
*** Error code 1
Stop in /usr/obj/usr/src/sys/GENERIC.
*** Error code 1
Stop in /usr/src.
*** Error code 1
Stop in /usr/src.
More information about the freebsd-questions
mailing list