Ndisulator - Linksys wireless-g PCI card Project Evil

[Jon Knight]

James,
No, nothing is on 10.x.x.x my lan is using 192.168.0.x
It was an example that the ndis0 does not become live.
I don't have DHCP turned on. I usually would try 192.168.0.8 but its
currently connected by cat5 in interface xl0

I tried changing to ch 10, no difference.

It is only until I try adhoc mode that it starts working - see here:
wireless# ifconfig ndis0 mediaopt adhoc

ndis0: flags=8c43<UP,BROADCAST,RUNNING,OACTIVE,SIMPLEX,MULTICAST> mtu 1500
        inet 10.0.0.1 netmask 0xffffff00 broadcast 10.0.0.255
        inet6 fe80::20f:66ff:fe6e:edf7%ndis0 prefixlen 64 scopeid 0x4
        ether 00:0f:66:6e:ed:f7
        media: IEEE 802.11 Wireless Ethernet autoselect (DS/11Mbps <adhoc>)
        status: associated
        ssid linksys-jon 1:linksys-jon
        channel 10 authmode OPEN powersavemode OFF powersavesleep 100
        rtsthreshold 2312 protmode CTS
        wepmode OFF weptxkey 1


/var/log/messages says

Dec 30 17:33:26 wireless kernel: ndis0: <Wireless-G PCI Adapter> mem
0xff000000-0xff001fff irq 10 at device 14.0 on pci0
Dec 30 17:33:26 wireless kernel: ndis0: NDIS API version: 5.0
Dec 30 17:33:26 wireless kernel: ndis0: Ethernet address: 00:0f:66:6e:ed:f7
Dec 30 17:33:26 wireless kernel: ndis0: 11b rates: 1Mbps 2Mbps 5.5Mbps
11Mbps
Dec 30 17:33:26 wireless kernel: ndis0: 11g rates: 6Mbps 9Mbps 12Mbps 18Mbps
36Mbps 48Mbps 54Mbps
Dec 30 18:44:46 wireless kernel: ndis0: link up
Dec 30 18:44:51 wireless kernel: ndis0: watchdog timeout



-----Original Message-----
From: owner-freebsd-questions at freebsd.org
[mailto:owner-freebsd-questions at freebsd.org] On Behalf Of James Jhai
Sent: Thursday, 30 December 2004 6:29 PM
To: freebsd-questions at freebsd.org
Subject: Re: Ndisulator - Linksys wireless-g PCI card Project Evil

Jon,

Is your router ip set to 10.0.0.*? Or is there a route for 10.0.0.0 on it...
Is dhcp enabled on the router? (disable it if so, I have had problems with
some dhcp not allowing ips if it didn't set them)
I noticed the channel is -1 as well, not sure if that matters...
I am far from an expert, so your have to forgive me if I am not much help.
-- 
- James
_______________________________________________
freebsd-questions at freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscribe at freebsd.org"