FreeBSD 5.1 Kernel Linking Error

linguae at lycos.com linguae at lycos.com
Tue Dec 28 12:19:49 PST 2004


Hello.  I am using FreeBSD 5.1 on my Compaq Armada 7400.  I was trying to recompile my kernel.  What happened was during the buildkernel phase (I use make buildkernel KERNCONF=ARMADA7400), when it was time to link the kernel modules, it ended in an error.

Here is my kernel configuration:

machine		i386
cpu		I586_CPU
cpu		I686_CPU
ident		ARMADA7400
maxusers	10	
device		npx
device		loop
options		INET
options		INET6
options		FFS
options		UFS_ACL
options		UFS_DIRHASH
options		SOFTUPDATES
options		MSDOSFS
options		CD9660
options		PSEUDOFS
options		COMPAT_43
options		COMPAT_FREEBSD4
options		SYSVSHM
options		SYSVSEM
options		SYSVMSG
options		_KPOSIX_PRIORITY_SCHEDULING

device		isa
device		eisa
device		pci
device		agp
device		fdc
device		ata
device		atadisk
device		atapicd
device		atapifd
device		scbus
device		da
device		sa
device		cd
device		pass
device		atkbdc
device		atkbd
device		psm
device		vga
device		splash
device		sc
device		vt
device		apm
device		cbb
device		pcic
device		pccard
device		cardbus
device		sio
device		ppc
device		ppbus
device		lpt
device		plip
device		ppi
device		vpo
device		miibus
device		ep
device		ether
device		tun
device		pty
device		gif
device		faith
device		bpf

# USB Support
device		uhci
device		ohci
device		ehci
device		usb
device		ugen
device		uhid
device		umass

# Sound Support
device		pcm
device		midi
device		seq

Here is my dmesg output:

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.1-RELEASE #0: Thu Jun  5 02:55:42 GMT 2003
    root at wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0689000.
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 266677191 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (266.68-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x652  Stepping = 2
  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory  = 67067904 (63 MB)
avail memory = 58134528 (55 MB)
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
Using $PIR table, 7 entries at 0xc00f0970
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 0.1 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
cbb0: <TI1250 PCI-CardBus Bridge> mem 0x7fffe000-0x7fffefff irq 11 at device 12.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <TI1250 PCI-CardBus Bridge> mem 0x7ffff000-0x7fffffff irq 11 at device 12.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
isab0: <PCI-ISA bridge> at device 14.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <GENERIC ATA controller> port 0x1000-0x100f,0-0x3,0-0x7,0-0x3,0-0x7 at device 14.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ohci0: <OHCI (generic) USB controller> mem 0x44080000-0x44080fff irq 11 at device 14.2 on pci0
usb0: OHCI version 1.0
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x0e11) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
eisa0: <EISA bus> on motherboard
mainboard0: <D@@0000 (System Board)> on eisa0 slot 0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0x200
sio1: port may not be enabled
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <SMCf010> can't assign resources (port)
Timecounters tick every 10.000 msec
ep0: <3Com Megahertz 3CXEM556 B> at port 0x100-0x10f irq 11 function 0 config 7 on pccard0
ep0: eeprom failed to come ready.
device_probe_and_attach: ep0 attach returned 6
sio4: <3Com Megahertz 3CXEM556 B> at port 0x110-0x117 irq 11 function 1 config 39 on pccard0
sio4: type 16550A with a bogus IIR_TXRDY register
sio4: unable to activate interrupt in fast mode - using normal mode
ad0: 4108MB <IBM-DKLA-24320> [8905/15/63] at ata0-master BIOSDMA
acd0: CDROM <COMPAQ CD-ROM CDRU241> at ata0-slave BIOSPIO
Mounting root from ufs:/dev/ad0s2a

Here is the kernel's error message (I won't post the entire kernel compilation process because that would result in a 400K message):

linking kernel
init_main.o: In function `proc0_init':
init_main.o(.text+0x2b9): undefined reference to `kse0_sched'
init_main.o(.text+0x2c3): undefined reference to `ksegrp0_sched'
init_main.o(.text+0x2cd): undefined reference to `proc0_sched'
init_main.o(.text+0x2d7): undefined reference to `thread0_sched'
kern_clock.o: In function `statclock':
kern_clock.o(.text+0x6a4): undefined reference to `sched_clock'
kern_condvar.o: In function `cv_waitq_add':
kern_condvar.o(.text+0x1353): undefined reference to `sched_sleep'
kern_exit.o: In function `exit1':
kern_exit.o(.text+0x1358): undefined reference to `sched_exit'
kern_fork.o: In function `fork1':
kern_fork.o(.text+0xc55): undefined reference to `sched_fork'
kern_idle.o: In function `idle_proc':
kern_idle.o(.text+0x1d6): undefined reference to `sched_runnable'
kern_thr.o: In function `thr_exit1':
kern_thr.o(.text+0xe8): undefined reference to `sched_exit_kse'
kern_thr.o(.text+0x17b): undefined reference to `sched_exit_thread'
kern_thr.o: In function `thr_create':
kern_thr.o(.text+0x46f): undefined reference to `sched_fork_kse'
kern_thr.o(.text+0x481): undefined reference to `sched_fork_thread'
kern_mutex.o: In function `propagate_priority':
kern_mutex.o(.text+0x7a): undefined reference to `sched_prio'
kern_proc.o: In function `procinit':
kern_proc.o(.text+0xe3): undefined reference to `sched_sizeof_proc'
kern_proc.o: In function `fill_kinfo_proc':
kern_proc.o(.text+0x1666): undefined reference to `sched_pctcpu'
kern_resource.o: In function `donice':
kern_resource.o(.text+0x968): undefined reference to `sched_nice'
kern_resource.o: In function `rtp_to_pri':
kern_resource.o(.text+0xd25): undefined reference to `sched_class'
kern_subr.o: In function `uio_yield':
kern_subr.o(.text+0x57e): undefined reference to `sched_prio'
kern_switch.o: In function `choosethread':
kern_switch.o(.text+0x11): undefined reference to `sched_choose'
kern_switch.o: In function `kse_reassign':
kern_switch.o(.text+0xea): undefined reference to `sched_add'
kern_switch.o: In function `adjustrunqueue':
kern_switch.o(.text+0x168): undefined reference to `sched_rem'
kern_switch.o(.text+0x170): undefined reference to `sched_add'
kern_switch.o(.text+0x19e): undefined reference to `sched_rem'
kern_switch.o: In function `setrunqueue':
kern_switch.o(.text+0x293): undefined reference to `sched_rem'
kern_switch.o(.text+0x34d): undefined reference to `sched_add'
kern_synch.o: In function `msleep':
kern_synch.o(.text+0x518): undefined reference to `sched_sleep'
kern_synch.o: In function `mi_switch':
kern_synch.o(.text+0xdf6): undefined reference to `sched_switchout'
kern_synch.o(.text+0xe1f): undefined reference to `sched_switchin'
kern_synch.o: In function `setrunnable':
kern_synch.o(.text+0xf1b): undefined reference to `sched_wakeup'
kern_synch.o: In function `yield':
kern_synch.o(.text+0x1169): undefined reference to `sched_prio'
kern_thread.o: In function `threadinit':
kern_thread.o(.text+0x1547): undefined reference to `sched_sizeof_thread'
kern_thread.o(.text+0x1591): undefined reference to `sched_sizeof_ksegrp'
kern_thread.o(.text+0x15db): undefined reference to `sched_sizeof_kse'
subr_trap.o: In function `userret':
subr_trap.o(.text+0x12): undefined reference to `sched_userret'
subr_trap.o: In function `ast':
subr_trap.o(.text+0x67f): undefined reference to `sched_prio'
ksched.o: In function `ksched_attach':
ksched.o(.text+0x2e): undefined reference to `sched_rr_interval'
ksched.o: In function `ksched_setscheduler':
ksched.o(.text+0x2d3): undefined reference to `sched_prio'
ksched.o(.text+0x3c3): undefined reference to `sched_prio'
ffs_snapshot.o: In function `ffs_snapshot':
ffs_snapshot.o(.text+0xb4a): undefined reference to `sched_nice'
ffs_snapshot.o(.text+0x24f4): undefined reference to `sched_nice'
vm_zeroidle.o: In function `vm_pagezero':
vm_zeroidle.o(.text+0x40d): undefined reference to `sched_runnable'
vm_pageout.o: In function `vm_pageout_scan':
vm_pageout.o(.text+0x1c14): undefined reference to `sched_nice'
machdep.o: In function `cpu_idle':
machdep.o(.text+0x16ee): undefined reference to `sched_runnable'
*** Error code 1

Stop in /usr/obj/usr/src/sys/ARMADA7400.
*** Error code 1

Stop in /usr/src.
*** Error code 1

Stop in /usr/src.

Thanks in advance.
----------------------------------------------
An Apple a day keeps the doctor away.
Proud supporter of UNIX-based operating systems.

-- 
_______________________________________________
Find what you are looking for with the Lycos Yellow Pages
http://r.lycos.com/r/yp_emailfooter/http://yellowpages.lycos.com/default.asp?SRC=lycos10



More information about the freebsd-questions mailing list