Building custom kernel - 'make' fails in FreeBSD 5.3

Fred Patmore freefred at bluebottle.com
Wed Dec 15 08:10:06 PST 2004


Hi,
I've just installed FreeBSD (after removing it due to portupgrade gone 
awry), did CVSup and now trying to build a custom kernel.

make depend was successful

but I get the following error messages when doing 'make'

[root at whitemoon /usr/src/sys/i386/compile/C-KERNEL#] make
linking kernel
umass.o(.text+0x1ab3): In function `umass_cam_attach_sim':
: undefined reference to `cam_simq_alloc'
umass.o(.text+0x1b04): In function `umass_cam_attach_sim':
: undefined reference to `cam_sim_alloc'
umass.o(.text+0x1b13): In function `umass_cam_attach_sim':
: undefined reference to `cam_simq_free'
umass.o(.text+0x1b35): In function `umass_cam_attach_sim':
: undefined reference to `xpt_bus_register'
umass.o(.text+0x1b61): In function `umass_cam_rescan_callback':
: undefined reference to `xpt_free_path'
umass.o(.text+0x1bd4): In function `umass_cam_rescan':
: undefined reference to `xpt_periph'
umass.o(.text+0x1be3): In function `umass_cam_rescan':
: undefined reference to `xpt_create_path'
umass.o(.text+0x1bff): In function `umass_cam_rescan':
: undefined reference to `xpt_setup_ccb'
umass.o(.text+0x1c1c): In function `umass_cam_rescan':
: undefined reference to `xpt_action'
umass.o(.text+0x1cfa): In function `umass_cam_detach_sim':
: undefined reference to `xpt_bus_deregister'
umass.o(.text+0x1d16): In function `umass_cam_detach_sim':
: undefined reference to `cam_sim_free'
umass.o(.text+0x1d5d): In function `umass_cam_action':
: undefined reference to `xpt_done'
umass.o(.text+0x1dd6): In function `umass_cam_action':
: undefined reference to `xpt_done'
umass.o(.text+0x1df5): In function `umass_cam_action':
: undefined reference to `xpt_done'
umass.o(.text+0x1e9d): In function `umass_cam_action':
: undefined reference to `xpt_done'
umass.o(.text+0x1f71): In function `umass_cam_action':
: undefined reference to `xpt_done'
umass.o(.text+0x1fbf): more undefined references to `xpt_done' follow
umass.o(.text+0x2185): In function `umass_cam_action':
: undefined reference to `cam_calc_geometry'
umass.o(.text+0x218d): In function `umass_cam_action':
: undefined reference to `xpt_done'
umass.o(.text+0x219e): In function `umass_cam_action':
: undefined reference to `xpt_done'
umass.o(.text+0x21af): In function `umass_cam_action':
: undefined reference to `xpt_done'
umass.o(.text+0x2221): In function `umass_cam_cb':
: undefined reference to `xpt_done'
umass.o(.text+0x231b): In function `umass_cam_cb':
: undefined reference to `xpt_done'
umass.o(.text+0x233f): more undefined references to `xpt_done' follow
*** Error code 1

'make'

Stop in /usr/src/sys/i386/compile/C-KERNEL.
[root at whitemoon /usr/src/sys/i386/compile/C-KERNEL#]
--------------

This is my kernel conf

#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
# 
http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
# in NOTES.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.413.2.6.2.2 2004/10/24 
18:02:52 scottl Exp $

machine i386
#cpu I486_CPU
#cpu I586_CPU
cpu I686_CPU
ident C-KERNEL

# To statically compile in device wiring instead of /boot/device.hints
#hints "GENERIC.hints" # Default places to look for devices.

options SCHED_4BSD # 4BSD scheduler
options INET # InterNETworking
options INET6 # IPv6 communications protocols
options FFS # Berkeley Fast Filesystem
options SOFTUPDATES # Enable FFS soft updates support
options UFS_ACL # Support for access control lists
options UFS_DIRHASH # Improve performance on big directories
options MD_ROOT # MD is a potential root device
#options NFSCLIENT # Network Filesystem Client
#options NFSSERVER # Network Filesystem Server
#options NFS_ROOT # NFS usable as /, requires NFSCLIENT
options MSDOSFS # MSDOS Filesystem
#options CD9660 # ISO 9660 Filesystem
options PROCFS # Process filesystem (requires PSEUDOFS)
options PSEUDOFS # Pseudo-filesystem framework
options GEOM_GPT # GUID Partition Tables.
options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!]
options COMPAT_FREEBSD4 # Compatible with FreeBSD4
options SCSI_DELAY=15000 # Delay (in ms) before probing SCSI
options KTRACE # ktrace(1) support
options SYSVSHM # SYSV-style shared memory
options SYSVMSG # SYSV-style message queues
options SYSVSEM # SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~128k to driver.
options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~215k to driver.
options ADAPTIVE_GIANT # Giant mutex is adaptive.

device apic # I/O APIC

# Bus support. Do not remove isa, even if you have no isa slots
device isa
#device eisa
device pci
device agp

# Floppy drives
device fdc

# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
#device ataraid # ATA RAID drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
#device atapist # ATAPI tape drives
options ATA_STATIC_ID # Static device numbering

# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse

device vga # VGA video card driver

device splash # Splash screen and screen saver support

# syscons is the default console driver, resembling an SCO console
device sc

# Enable this for the pcvt (VT220 compatible) console driver
#device vt
#options XSERVER # support for X server on a vt console
#options FAT_CURSOR # start with block cursor

device agp # support several AGP chipsets

# Floating point support - do not disable.
device npx

# Power management support (see NOTES for more options)
#device apm
# Add suspend/resume support for the i8254.
device pmtimer

# PCCARD (PCMCIA) support
# PCMCIA and cardbus bridge support
#device cbb # cardbus (yenta) bridge
#device pccard # PC Card (16-bit) bus
#device cardbus # CardBus (32-bit) bus

# Serial (COM) ports
device sio # 8250, 16[45]50 based serial ports

# Parallel port
device ppc
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da

# If you've got a "dumb" serial or parallel PCI card that is
# supported by the puc(4) glue driver, uncomment the following
# line to enable it (connects to the sio and/or ppc drivers):
#device puc

# PCI Ethernet NICs.
device de # DEC/Intel DC21x4x (``Tulip'')
device em # Intel PRO/1000 adapter Gigabit Ethernet Card
device ixgb # Intel PRO/10GbE Ethernet Card
device txp # 3Com 3cR990 (``Typhoon'')
device vx # 3Com 3c590, 3c595 (``Vortex'')

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
#device bfe # Broadcom BCM440x 10/100 Ethernet
#device bge # Broadcom BCM570xx Gigabit Ethernet
#device dc # DEC/Intel 21143 and various workalikes
device fxp # Intel EtherExpress PRO/100B (82557, 82558)
#device lge # Level 1 LXT1001 gigabit ethernet
#device nge # NatSemi DP83820 gigabit ethernet
#device pcn # AMD Am79C97x PCI 10/100 (precedence over 'lnc')
device re # RealTek 8139C+/8169/8169S/8110S
device rl # RealTek 8129/8139
#device sf # Adaptec AIC-6915 (``Starfire'')
device sis # Silicon Integrated Systems SiS 900/SiS 7016
#device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet
#device ste # Sundance ST201 (D-Link DFE-550TX)
#device ti # Alteon Networks Tigon I/II gigabit Ethernet
#device tl # Texas Instruments ThunderLAN
#device tx # SMC EtherPower II (83c170 ``EPIC'')
#device vge # VIA VT612x gigabit ethernet
#device vr # VIA Rhine, Rhine II
#device wb # Winbond W89C840F
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')

# ISA Ethernet NICs. pccard NICs included.
#device cs # Crystal Semiconductor CS89x0 NIC
# 'device ed' requires 'device miibus'
device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards
device ex # Intel EtherExpress Pro/10 and Pro/10+
#device ep # Etherlink III based cards
#device fe # Fujitsu MB8696x based cards
#device ie # EtherExpress 8/16, 3C507, StarLAN 10 etc.
device lnc # NE2100, NE32-VL Lance Ethernet cards
#device sn # SMC's 9000 series of Ethernet chips
#device xe # Xircom pccard Ethernet

# ISA devices that use the old ISA shims
#device le

# Wireless NIC cards
#device wlan # 802.11 support
#device an # Aironet 4500/4800 802.11 wireless NICs.
#device awi # BayStack 660 and others
#device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
#device wl # Older non 802.11 Wavelan wireless NIC.

# Pseudo devices.
device loop # Network loopback
device mem # Memory and kernel memory devices
device io # I/O device
device random # Entropy device
device ether # Ethernet support
#device sl # Kernel SLIP
#device ppp # Kernel PPP
#device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
device md # Memory "disks"
device gif # IPv6 and IPv4 tunneling
device faith # IPv6-to-IPv4 relaying (translation)

# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
device bpf # Berkeley packet filter

# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device usb # USB Bus (required)
#device udbp # USB Double Bulk Pipe devices
device ugen # Generic
#device uhid # "Human Interface Devices"
device ukbd # Keyboard
#device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and da
device ums # Mouse
#device urio # Diamond Rio 500 MP3 player
#device uscanner # Scanners
# USB Ethernet, requires mii
#device aue # ADMtek USB Ethernet
#device axe # ASIX Electronics USB Ethernet
#device cue # CATC USB Ethernet
#device kue # Kawasaki LSI USB Ethernet
#device rue # RealTek RTL8150 USB Ethernet

# FireWire support
#device firewire # FireWire bus code
#device sbp # SCSI over FireWire (Requires scbus and da)
#device fwe # Ethernet over FireWire (non-standard!)

--
Since I have no SCSI devices, I've removed anything that has something 
to do with SCSI from the conf files. Could that be it ? (if you cant 
tell by now, I am fairly new to this :-)



More information about the freebsd-questions mailing list