emulators/vmware2 broken...

[Alexandre Biancalana]

Hi All,

    I'm fighting with the following problem to install emulators/vmware2.

    cc -O -pipe   
-I/usr/ports/emulators/vmware2/work/vmware-distrib/vmmon-only/include 
-I/usr/ports/emulators/vmwa
e2/work/vmware-distrib/vmmon-only/common 
-I/usr/ports/emulators/vmware2/work/vmware-distrib/vmmon-only/freebsd
I/usr/ports/emulators/vmware2/work/vmware-distrib/vmmon-only/export/include 
-I/sys -I/usr/ports/emulators/vmwar
2/work/vmware-distrib/vmmon-only/../vmnet-only/freebsd/ 
-DCDEV_MAJOR_=200 -DSMP -DAPIC_IO  -D_KERNEL -Wall -Wre
undant-decls -Wnested-externs -Wstrict-prototypes  -Wmissing-prototypes 
-Wpointer-arith -Winline -Wcast-qual  -
format-extensions -ansi -DKLD_MODULE -nostdinc -I- 
-I/usr/ports/emulators/vmware2/work/vmware-distrib/vmmon-onl
/include 
-I/usr/ports/emulators/vmware2/work/vmware-distrib/vmmon-only/common 
-I/usr/ports/emulators/vmware2/wo
k/vmware-distrib/vmmon-only/freebsd 
-I/usr/ports/emulators/vmware2/work/vmware-distrib/vmmon-only/export/includ
 -I/sys 
-I/usr/ports/emulators/vmware2/work/vmware-distrib/vmmon-only/../vmnet-only/freebsd/ 
-I. -I@ -I@/../inc
ude -I/usr/include  -mpreferred-stack-boundary=2 -Wall -Wredundant-decls 
-Wnested-externs -Wstrict-prototypes 
Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual  
-fformat-extensions -ansi -c /usr/ports/emulators/vmw
re2/work/vmware-distrib/vmmon-only/freebsd/hostif.c
/usr/ports/emulators/vmware2/work/vmware-distrib/vmmon-only/freebsd/hostif.c: 
In function `FindMPN':
/usr/ports/emulators/vmware2/work/vmware-distrib/vmmon-only/freebsd/hostif.c:184: 
invalid operands to binary >>
/usr/ports/emulators/vmware2/work/vmware-distrib/vmmon-only/freebsd/hostif.c:188: 
invalid type argument of `una
y *'
/usr/ports/emulators/vmware2/work/vmware-distrib/vmmon-only/freebsd/hostif.c: 
In function `HostIF_LookupUserMPN
:
/usr/ports/emulators/vmware2/work/vmware-distrib/vmmon-only/freebsd/hostif.c:185: 
warning: `pte' might be used
ninitialized in this function
/usr/ports/emulators/vmware2/work/vmware-distrib/vmmon-only/freebsd/hostif.c: 
In function `HostIF_LockPage':
/usr/ports/emulators/vmware2/work/vmware-distrib/vmmon-only/freebsd/hostif.c:185: 
warning: `pte' might be used
ninitialized in this function
/usr/ports/emulators/vmware2/work/vmware-distrib/vmmon-only/freebsd/hostif.c:185: 
warning: `pte' might be used
ninitialized in this function
/usr/ports/emulators/vmware2/work/vmware-distrib/vmmon-only/freebsd/hostif.c: 
In function `CheckFunc':
/usr/ports/emulators/vmware2/work/vmware-distrib/vmmon-only/freebsd/hostif.c:185: 
warning: `pte' might be used
ninitialized in this function
*** Error code 1

Stop in /usr/ports/emulators/vmware2/work/vmware-distrib/vmmon-only.
*** Error code 1

Stop in /usr/ports/emulators/vmware2/work/vmware-distrib/vmmon-only.
*** Error code 1

Stop in /usr/ports/emulators/vmware2/work/vmware-distrib.
*** Error code 1

Stop in /usr/ports/emulators/vmware2.
*** Error code 1

Stop in /usr/ports/emulators/vmware2.


That's my machine:

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.9-PRERELEASE #0: Sat Aug 30 17:49:40 BRT 2003
    root at Cruel:/usr/src/sys/compile/Cruel
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 860884854 Hz
CPU: Intel Pentium III (860.88-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x686  Stepping = 6
  
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 268091392 (261808K bytes)
avail memory = 257105920 (251080K bytes)
Preloaded elf kernel "kernel" at 0xc03b5000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 9 entries at 0xc00fbc30
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82820 host to AGP bridge> mem 0xf4000000-0xf7ffffff at 
device 0.0 on pci0
pcib1: <PCI to PCI bridge (vendor=8086 device=250f)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia Riva Ultra Vanta TNT2 graphics accelerator> at 0.0 irq 9
pcib2: <Intel 82801AA (ICH) Hub to PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xec80-0xecff mem 
0xfbfffc00-0xfbfffc7f irq 5 at device 12.0 on pci2
xl0: Ethernet address: 00:b0:d0:50:c9:a7
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <Intel 82801AA (ICH) PCI to LPC bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH ATA66 controller> port 0xffa0-0xffaf at device 31.1 
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82801AA (ICH) USB controller> port 0xff80-0xff9f irq 11 at 
device 31.2 on pci0
usb0: <Intel 82801AA (ICH) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <unknown card> (vendor=0x8086, dev=0x2413) at 31.3 irq 10
pcm0: <Intel ICH (82801AA)> port 0xdc80-0xdcbf,0xd800-0xd8ff irq 10 at 
device 31.5 on pci0
pcm0: <Analog Devices AD1881 AC97 Codec>
orm0: <Option ROMs> at iomem 0xc0000-0xc97ff,0xc9800-0xcbfff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: parallel port not found.
IP packet filtering initialized, divert enabled, rule-based forwarding 
enabled, default to deny, unlimited logging
ad0: 39205MB <Maxtor 6E040L0> [79656/16/63] at ata0-master UDMA66
acd0: CDROM <LTN485> at ata1-master PIO4
acd1: CD-RW <Hewlett-Packard CD-Writer Plus 9100> at ata1-slave PIO4

 I cvsup'ed my ports tree today.  Some sugestion/advise ?!

  Regards,

Alexandre