Boot Problem

[Kris Davidson]

Okay I've checked my BIOS. I'm using Phoenix BIOS Setup version 4.0 with 
  the bwlo versions

BIOS Version: R216B1
EC BIOS Version: R216B1
Video BIOS Version: BOAM7_12

I can't seem to find the option specified below or something similar.

Hidetoshi Shimokawa wrote:
> It seems that fwohci registers are not mapped correctly.
> If your BIOS has a option for `PnP OS', try to set it to 'no'.
> 
> /\ Hidetoshi Shimokawa
> \/  simokawa at sat.t.u-tokyo.ac.jp
> PGP public key: http://www.sat.t.u-tokyo.ac.jp/~simokawa/pgp.html
> 
> At Sat, 25 Oct 2003 16:32:30 +0100,
> Kris Davidson wrote:
> 
>>I'm trying to install 5.1 release and am in the process of downloading 
>>version 4.8
>>
>>Hidetoshi Shimokawa wrote:
>>
>>>Which version of FreeBSD are you trying to install?
>>>
>>>/\ Hidetoshi Shimokawa
>>>\/  simokawa at sat.t.u-tokyo.ac.jp
>>>PGP public key: http://www.sat.t.u-tokyo.ac.jp/~simokawa/pgp.html
>>>
>>>At Sat, 25 Oct 2003 15:19:56 +0100,
>>>Kris Davidson wrote:
>>>
>>>
>>>>This may be a complete newbie question, or it may have been answered 
>>>>before but I would appreciate any help or input that can be provided.
>>>>
>>>>I have a Sony VAIO PCG-GRZ615M laptop which I'm trying to install 
>>>>FreeBSD on. I boot from the CD and then try selecting each one of the 7 
>>>>boot options however each option I pick returns the below and then the 
>>>>system reboots, as such I can not start the installation.
>>>>
>>>>----------------------------------------------
>>>>fwohci0: Link S100, max_rec 2 bytes
>>>>fwohci0: max_rec2 -> 512
>>>>fwohci0: bus_OPT 0x0 -> 0xf8008000
>>>>fwohci0: fwohci_set_intr: 1
>>>>
>>>>firewire :<IEEE1394(firewire)Bus> on fwohci0
>>>>fatal trap 12: page fault while in Kernel mode
>>>>
>>>>fault virtual address = 0x2c
>>>>fault code = supervisor read, page not present
>>>>instruction pointer = 0x8 :0xc02e5a50
>>>>Stack pointer = 0x10 :0xc0b2e8c4
>>>>frame pointer = 0x10 :0xc0b2e8c8
>>>>code segment = base 0x0, limit 0xfffff, type 0x1b
>>>>             = DPL0, pres 1, def32 1, gran 1
>>>>processor eflags = interrupte enabled, resume, IOPL=0
>>>>current process = 0 (swapper)
>>>>trap number = 12
>>>>
>>>>Panic: Page fault
>>>>----------------------------------------------
>>>>
>>>>I would appreciate it if anyone could help me with this or provide advice.
>>>>
>>>>Cheers.
>>>>