Mesa 4.3.2 - Configure failure

[Eduardo Viruena Silva]

On Fri, 9 May 2003, Matthieu Bonavita wrote:

> Hum, I just tried what you suggested....unfortunately nothing
> changes...I think glut isn't installed at all rather than unfound, but
> Mesa should install it, shoudn't it ?

>
>
> Le Fri, 09 May 2003 12:00:49 -0500
> Chris Pressey <cpressey at catseye.mb.ca> frappa sauvagement:
>
> > On Fri, 9 May 2003 18:15:58 +0200
> > Matthieu Bonavita <m.bonavita at free.fr> wrote:
> >
> > > Hello, I need to install a package,which require SDL, which himself
> > > require Mesa3.4.2. While installing this last one, I get a :
> > >
> > > ===>  Script "configure" failed unexpectedly.
> > >       Please report the problem to sobomax at FreeBSD.org [maintainer]
> > >       and attach the
> > >       "/usr/ports/graphics/Mesa3/work/Mesa-3.4.2/config.log" including
> > >       the output of the failure of your make command. Also, it might
> > >       be a good idea to provide an overview of all packages installed
> > >       on your system (e.g. an `ls /var/db/pkg`).
> > > *** Error code 1
> > >
> > > Stop in /usr/ports/graphics/Mesa3.
> > >
> > > For information,I run a FreeBSD RELEASE 5.0 - p7.
> > > I just updated today the ports collection, same effects, with
> > > Mesa3.4.2_2... Attached files : Packages list, Config.log
> > >
> > > If anybody has a clue ...

It happend to me but I don't remember what I was compiling.

Start over, begin compiling Mesa3:

cd /usr/ports/x11/Mesa3
make clean
make install
make clean

It is important "make clean" before compiling,
after cvs-upgrading your ports.

Then, try compiling the port you were compiling in the first place.

Mesa3 can be compiled but, if you cannot, I have it in my box:

	ftp://michelle.esfm.ipn.mx/pub/Mesa-3.4.2_2.tbz

compiled for FreeBSD 5.0-RELEASE.


	Eduardo.

--
2B | ~2B == ?
	Hamlet.