FW: 2 PS/2 keyboards == trouble

stan stanb at awod.com
Wed May 7 15:40:22 PDT 2003

On Wed, May 07, 2003 at 12:21:50PM +0200, Sondre R?njom wrote:
> On Tue, 6 May 2003, stan wrote:
> > Can anyone give me a clue on this. I've been using FreeBSD for years on my
> > laptop, but this ones a show stoper, and I really don't want to have to
> > resort to installing Linux because of this oen stupid problem.
> > 
> > Would more details help?
> > 
> > 
> > Ive got a new laptop I'm setting up FreeBSD STABLE on.
> > 
> > The one I'm replacing has both a built in keyboard, and an external PS/2
> > keyboard pluged inot a port replicator, and it works like a charm. I will
> > admit that machine has not been updated in several months.
> > 
> > On the new machine when I try this, I get an error message, and _neither_
> > kyboard works.
> > 
> > How can I fix this?
> Error Messages pleas ;)

Sorry about the snapish first message. It was a bad day at work. here :

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.8-STABLE #1: Fri May  2 17:43:19 EDT 2003
    root at brown2.fas.com:/usr/obj/usr/src/sys/BROWN2
Timecounter "i8254"  frequency 1193182 Hz
CPU: Intel(R) Pentium(R) III Mobile CPU      1200MHz (1196.15-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6b1  Stepping = 1
real memory  = 268238848 (261952K bytes)
avail memory = 255627264 (249636K bytes)
Preloaded elf kernel "kernel" at 0xc053f000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82830 host to AGP bridge> mem 0x60000000-0x6fffffff at device 0.0 on pci0
pcib1: <PCI to PCI bridge (vendor=8086 device=3576)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI model 4c59 graphics accelerator> at 0.0 irq 11
pcib2: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
ohci0: <NEC uPD 9210 USB controller> mem 0x40080000-0x40080fff irq 10 at device 2.0 on pci2
usb0: OHCI version 1.0, legacy support
usb0: <NEC uPD 9210 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ums0: HP HP USB WHEEL MOUSE, rev 1.00/0.00, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
ohci1: <NEC uPD 9210 USB controller> mem 0x40100000-0x40100fff irq 10 at device 2.1 on pci2
usb1: OHCI version 1.0, legacy support
usb1: <NEC uPD 9210 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ukbd0: CHICONY Compaq USB Keyboard, rev 1.10/1.05, addr 2, iclass 3/1
kbd1 at ukbd0
uhid0: CHICONY Compaq USB Keyboard, rev 1.10/1.05, addr 2, iclass 3/0
pci2: <USB controller> at 2.2 irq 10
pcic0: <TI PCI-1410 PCI-CardBus Bridge> mem 0x40180000-0x40180fff irq 11 at device 3.0 on pci2
pcic0: TI12XX PCI Config Reg: [speaker enable][pwr save][CSC serial isa irq]
pccard0: <PC Card 16-bit bus (classic)> on pcic0
fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0x2000-0x203f mem 0x40000000-0x4001ffff,0x40200000-0x40200fff irq 5 at device 4.0 on pci2
fxp0: Ethernet address 00:d0:59:c6:41:bf
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci2: <unknown card> (vendor=0x11c1, dev=0x045c) at 4.1 irq 5
isab0: <PCI to ISA bridge (vendor=8086 device=248c)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 ATA100 controller> port 0x4440-0x444f,0-0x3,0-0x7,0-0x3,0-0x7 irq 11 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=0x8086, dev=0x2485) at 31.5 irq 5
orm0: <Option ROM> at iomem 0xc0000-0xcdfff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
device_probe_and_attach: atkbd0 attach returned 6
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: parallel port not found.
ata1-slave: ATAPI identify retries exceeded
ad0: 28615MB <HITACHI_DK23DA-30> [58140/16/63] at ata0-master UDMA33
acd0: DVD-ROM <Compaq DVD-ROM DV28EB 01> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
ltmdm0: <Lucent Winmodem> port 0x2040-0x2047 mem 0x40280000-0x40280fff irq 5 at device 4.1 on pci2
ltmdm0: type Virtual 16550A

Does thta give us a clue?

"They that would give up essential liberty for temporary safety deserve
neither liberty nor safety."
						-- Benjamin Franklin

More information about the freebsd-questions mailing list