cd drive problems when trying to play an audio cd on 5.1
Richard morris
styls at msn.com
Tue Jul 1 04:26:42 PDT 2003
I have recently got sound working on my system and wanted to listen to an
audio cd when I ran xmms and seleted /cdrom as my directory.
The playlist on the cd shows up and when i try playing a track it starts as
if it is but i get no sound. I thought it might have been the sound so i got
a mp3 from a peer on irc and played it back and the sound working. I also
notice the drive does not spin and the light remains solid.
here is a look at my /etc/fstab file:
# Device Mountpoint FStype Options Dump
Pass#
/dev/ad0s1b none swap sw
0 0
/dev/ad0s1a / ufs rw
1 1
/dev/ad0s1e /tmp ufs rw
2 2
/dev/ad0s1f /usr ufs rw
2 2
/dev/ad0s1d /var ufs rw
2 2
/dev/acd0 /cdrom cd9660 ro,noauto 0
0
/dev/acd1 /cdrom1 cd9660 ro,noauto 0
0
also here are my boot messages:
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-RELEASE #0: Thu Jun 5 02:55:42 GMT 2003
root at wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc06f7000.
Preloaded elf module "/boot/kernel/snd_via82c686.ko" at 0xc06f70cc.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc06f7180.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06f722c.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 1001780886 Hz
CPU: AMD Athlon(tm) Processor (1001.78-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x642 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PA
T,PSE36,MMX,FXSR>
AMD Features=0xc0440000<RSVD,AMIE,DSP,3DNow!>
real memory = 536870912 (512 MB)
avail memory = 513933312 (490 MB)
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <COMPAQ HAWA7K11> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 8 entries at 0xc00fa040
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-safe" frequency 3579545 Hz
acpi_timer0: <32-bit timer at 3.579545MHz> port 0xee08-0xee0b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem 0x90000000-0x93ffffff
at
device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pci0: <multimedia, video> at device 3.0 (no driver attached)
pci0: <multimedia> at device 3.1 (no driver attached)
pci0: <simple comms> at device 4.0 (no driver attached)
rl0: <Accton MPX 5030/5038 10/100BaseTX> port 0x1000-0x10ff mem
0x81000000-0x810
000ff irq 5 at device 5.0 on pci0
rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect
mode
rl0: Ethernet address: 00:10:b5:73:ce:7b
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 20.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686A UDMA66 controller> port 0x1880-0x188f at device 20.1
on pc
i0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0x1840-0x185f irq 11 at device 20.2
on p
ci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0x1860-0x187f irq 11 at device 20.3
on p
ci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ugen0: Logitech Camera, rev 1.10/1.00, addr 2
pci0: <bridge, PCI-unknown> at device 20.4 (no driver attached)
pcm0: <VIA VT82C686A> port 0x1894-0x1897,0x1890-0x1893,0x1400-0x14ff irq 10
at d
evice 20.5 on pci0
pcm0: <Analog Devices AD1881A AC97 Codec>
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
0x3f7,0x3f0-0
x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
orm0: <Option ROMs> at iomem 0xec000-0xeffff,0xe9000-0xebfff,0xc0000-0xcffff
on
isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
ad0: 42934MB <WDC WD450AA-60BAA0> [87233/16/63] at ata0-master UDMA66
ad1: 38166MB <WDC WD400BB-00DEA0> [77545/16/63] at ata0-slave UDMA66
acd0: DVD-ROM <Compaq DVD-ROM DVD-115 0112> at ata1-master PIO4
acd1: CD-RW <R/RW 4x4x32> at ata1-slave PIO4
Mounting root from ufs:/dev/ad0s1a
pid 2298 (conftest), uid 0: exited on signal 10 (core dumped)
pid 31047 (gtk-gnutella), uid 1001: exited on signal 6 (core dumped)
Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped
syncing disks, buffers remaining... 10 10 1 1
done
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-RELEASE #0: Thu Jun 5 02:55:42 GMT 2003
root at wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc06f7000.
Preloaded elf module "/boot/kernel/snd_via82c686.ko" at 0xc06f70cc.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc06f7180.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06f722c.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 1001780466 Hz
CPU: AMD Athlon(tm) Processor (1001.78-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x642 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PA
T,PSE36,MMX,FXSR>
AMD Features=0xc0440000<RSVD,AMIE,DSP,3DNow!>
real memory = 536870912 (512 MB)
avail memory = 513933312 (490 MB)
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <COMPAQ HAWA7K11> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 8 entries at 0xc00fa040
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-safe" frequency 3579545 Hz
acpi_timer0: <32-bit timer at 3.579545MHz> port 0xee08-0xee0b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem 0x90000000-0x93ffffff
at
device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pci0: <multimedia, video> at device 3.0 (no driver attached)
pci0: <multimedia> at device 3.1 (no driver attached)
pci0: <simple comms> at device 4.0 (no driver attached)
rl0: <Accton MPX 5030/5038 10/100BaseTX> port 0x1000-0x10ff mem
0x81000000-0x810
000ff irq 5 at device 5.0 on pci0
rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect
mode
rl0: Ethernet address: 00:10:b5:73:ce:7b
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 20.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686A UDMA66 controller> port 0x1880-0x188f at device 20.1
on pc
i0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0x1840-0x185f irq 11 at device 20.2
on p
ci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0x1860-0x187f irq 11 at device 20.3
on p
ci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ugen0: Logitech Camera, rev 1.10/1.00, addr 2
pci0: <bridge, PCI-unknown> at device 20.4 (no driver attached)
pcm0: <VIA VT82C686A> port 0x1894-0x1897,0x1890-0x1893,0x1400-0x14ff irq 10
at d
evice 20.5 on pci0
pcm0: <Analog Devices AD1881A AC97 Codec>
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
0x3f7,0x3f0-0
x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
orm0: <Option ROMs> at iomem 0xec000-0xeffff,0xe9000-0xebfff,0xc0000-0xcffff
on
isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
ad0: 42934MB <WDC WD450AA-60BAA0> [87233/16/63] at ata0-master UDMA66
ad1: 38166MB <WDC WD400BB-00DEA0> [77545/16/63] at ata0-slave UDMA66
acd0: DVD-ROM <Compaq DVD-ROM DVD-115 0112> at ata1-master PIO4
acd1: CD-RW <R/RW 4x4x32> at ata1-slave PIO4
Mounting root from ufs:/dev/ad0s1a
pid 528 (gtk-gnutella), uid 1001: exited on signal 6 (core dumped)
_________________________________________________________________
Add photos to your messages with MSN 8. Get 2 months FREE*.
http://join.msn.com/?page=features/featuredemail
More information about the freebsd-questions
mailing list