backup drive bootabel
Noah
admin2 at enabled.com
Sat Dec 20 12:14:52 PST 2003
>
> To deal with a standard MBR, you have to use fdisk(8). Try:
>
> # fdisk -B -b /boot/mbr -i da1
>
> This will walk you through the current settings interactively,
> letting you generate a slice table, change the active slice and
> rewrite the boot code.
>
> Of course, just to confuse you, fdisk(8) will talk all about
> "partitions", but be assured it actually means "slices" in *BSD speak.
> (partitions are generated within each slice using disklabel(8) which
> is a BSD specific thing. slices are generic for practically all
> OSes that can run on the IA32 architecture from DOS onwards.)
Matthew,
okay I think I see what fdisk is wanting. I wanted to run it by you before i
did anything:
here is the prompts I filles out. some prompts do have anything appear there
i just hit return for the default value. Do I need to change the active
partition back to anything after running the fdisk Program? I still want to
boot from /dev/da0 for the time being. I just want /dev/da1 drive ready for
booting if /dev/da0 fails. Am I on the proper course here?
--- snip ---
# fdisk -B -b /boot/mbr -i da1
******* Working on device /dev/da1 *******
parameters extracted from in-core disklabel are:
cylinders=8924 heads=255 sectors/track=63 (16065 blks/cyl)
Figures below won't work with BIOS for partitions not in cyl 1
parameters to be used for BIOS calculations are:
cylinders=8924 heads=255 sectors/track=63 (16065 blks/cyl)
Do you want to change our idea of what BIOS thinks ? [n]
Media sector size is 512
Warning: BIOS sector numbering starts with sector 1
Information from DOS bootblock is:
The data for partition 1 is:
sysid 165,(FreeBSD/NetBSD/386BSD)
start 63, size 143363997 (70001 Meg), flag 80 (active)
beg: cyl 0/ head 1/ sector 1;
end: cyl 1023/ head 254/ sector 63
Do you want to change it? [n]
The data for partition 2 is:
<UNUSED>
Do you want to change it? [n]
The data for partition 3 is:
<UNUSED>
Do you want to change it? [n]
The data for partition 4 is:
<UNUSED>
Do you want to change it? [n]
Partition 1 is marked active
Do you want to change the active partition? [n] y
Supply a decimal value for "active partition" [1]
Are you happy with this choice [n] y
Do you want to change the boot code? [n] y
We haven't changed the partition table yet. This is your last chance.
parameters extracted from in-core disklabel are:
cylinders=8924 heads=255 sectors/track=63 (16065 blks/cyl)
Figures below won't work with BIOS for partitions not in cyl 1
parameters to be used for BIOS calculations are:
cylinders=8924 heads=255 sectors/track=63 (16065 blks/cyl)
Information from DOS bootblock is:
1: sysid 165,(FreeBSD/NetBSD/386BSD)
start 63, size 143363997 (70001 Meg), flag 80 (active)
beg: cyl 0/ head 1/ sector 1;
end: cyl 1023/ head 254/ sector 63
2: <UNUSED>
3: <UNUSED>
4: <UNUSED>
Should we write new partition table? [n] y
--- snip ---
Happy Holidays,
- noah
More information about the freebsd-questions
mailing list