apcupsd 3.10.8 master/slave setup

[Dave McCammon]

Anyone have a master/slave or an NIS setup working
correctly that can share some insight?

If power is pulled from UPS, the master sends the
warning to its console but...

-the slaves lose their connection to the master
-an "apcaccess status" on the master after plug is
pulled will hang.
-when ups is plugged back in to power outlet there is
no status change sent.

- here is the apcupsd stuff from 'ps -aux'
------------------------------------------------------
root   31938  0.0  0.3  3864 1536  ??  Is    4:49PM  
0:00.27 /usr/local/sbin/apcupsd --kill-on-powerfail

root   32071  0.0  0.1   632  264  ??  I     5:03PM  
0:00.00 /bin/sh /usr/local/etc/apcupsd/apccontrol
onbattery RACK_UPS 1 0

root   32072  0.0  0.1   632  264  ??  I     5:03PM  
0:00.00 /bin/sh /usr/local/etc/apcupsd/onbattery
RACK_UPS 1 0

root   32074  0.0  0.1   632  264  ??  I     5:03PM  
0:00.00 /bin/sh /usr/local/etc/apcupsd/onbattery
RACK_UPS 1 0

root   32075  0.0  0.1   992  564  ??  I     5:03PM  
0:00.01 /usr/bin/mail -s master.mydomain.net Power
Failure !!! root

root   32076  0.0  0.3  3312 1352  ??  I     5:03PM  
0:00.01 /usr/local/sbin/apcaccess status
------------------------------------------------------



master config is stock 

slave config is stock with below changed
UPSCABLE ether
UPSTYPE net
DEVICE master.mydomain.net:3551

The above configs are recommended from 
http://www.apcupsd.com/3.10.x-manual/ch04s06.html




__________________________________
Do you Yahoo!?
New Yahoo! Photos - easier uploading and sharing.
http://photos.yahoo.com/