DLINK & VIA Rhine

Fri Dec 5 10:42:24 PST 2003

Hi People,

i got a problem and cant define if it is a matter of
On Board Ethernet Chip for Via Rhine or of the DLink
Wireless Card....

My MB is a MSI KT4V Series ( Sound + Lan )

In any way, FreeBSD-5.1 does not find the device,
even with a new GENERIC kernel.
I am doing a new installation on a New HD on the same Machine,
 ( because of other reasons )
by setting up the Network i could not find the interface,
so i am installing over the Onboard vr0
but i'd like to put in function the DLINK-DWL-G520

Any suggestion for debuggin would be appreciated,
thanks a million for now
:-)

here my dmesg report as before the new install,
i choose wlan and wi option in the kernel....
but as you can see::

########################################################################

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.1-RELEASE-p8 #0: Wed Oct  1 11:18:22 CEST 2003
    root at ....................:/usr/obj/usr/src/sys/DAEMON
Preloaded elf kernel "/boot/kernel/kernel" at 0xc070b000.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc070b26c.
Preloaded elf module "/boot/kernel/nvidia.ko" at 0xc070b318.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc070b3c4.
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 1800071225 Hz
CPU: AMD Athlon(tm) XP 2200+ (1800.07-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x681  Stepping = 1
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory  = 536805376 (511 MB)
avail memory = 513789952 (489 MB)
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <AMIINT VIA_K7  > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 11 entries at 0xc00f7ff0
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast"  frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA Generic host to PCI bridge> mem 0xe0000000-0xe7ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
nvidia0: <GeForce4 MX 440> mem 0xddc80000-0xddcfffff,0xd0000000-0xd7ffffff,0xde000000-0xdeffffff irq 11 at device 0.0 on p
ci1
uhci0: <VIA 83C572 USB controller> port 0xe800-0xe81f irq 11 at device 16.0 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: vendor 0x1241 product 0x1122, rev 1.00/1.00, addr 2, iclass 3/1
ums0: 5 buttons and Z dir.
uhci1: <VIA 83C572 USB controller> port 0xec00-0xec1f irq 5 at device 16.1 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 16.3 (no driver attached)
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8235 UDMA133 controller> port 0xfc00-0xfc0f at device 17.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pcm0: <VIA VT8235> port 0xe400-0xe4ff irq 5 at device 17.5 on pci0
pcm0: <Avance Logic ALC650 AC97 Codec>
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xe000-0xe0ff mem 0xdffffe00-0xdffffeff irq 11 at device 18.0 on pci0
vr0: Ethernet address: 00:10:dc:c9:1d:63
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
acpi_button1: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
fdc0: cmd 3 failed at out byte 1 of 3
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
fdc0: cmd 3 failed at out byte 1 of 3
pmtimer0 on isa0
fdc0: cannot reserve I/O port range (6 ports)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 16 steps (100% to 6.2%), currently 100.0%
ad0: 39205MB <Maxtor 6E040L0> [79656/16/63] at ata0-master UDMA133
Mounting root from ufs:/dev/ad0s1a

############################################################################

bests for the weekend,
alex

-- 
** if someone comes along and says rap is not what it used to be,
** then it's a sign of them getting old.