Vinum Configuration File
lukek
lukek at meibin.net
Wed Aug 20 18:21:23 PDT 2003
Things got only marginally better, I now have errors about disks being full
can someone tell me where that is comming from the disks are for all intents
and purposes empty.
6: sd length 76g drive d1
** 6 No space for on d1: No space left on device
7: sd length 76g drive d2
** 7 Unnamed sd is not associated with a plex: Invalid argument
8: sd length 76g drive d3
** 8 Unnamed sd is not associated with a plex: Invalid argument
3 drives:
D d1 State: up Device /dev/ad1s1e Avail:
154140/76316 MB (201%)
D d2 State: up Device /dev/ad2s1e Avail:
76316/76316 MB (100%)
D d3 State: up Device /dev/ad3s1e Avail:
76316/76316 MB (100%)
1 volumes:
V export State: up Plexes: 1 Size: 0 B
1 plexes:
P export.p0 S State: up Subdisks: 0 Size: 0 B
-1 subdisks:
----- Original Message -----
From: "lukek" <lukek at meibin.net>
To: "FreeBSD" <freebsd-questions at freebsd.org>
Sent: 2003年8月21日 9:34
Subject: Vinum Configuration File
> Hello,
> I am having a bit of trouble getting the conf file correct. I have listed
> the devices and slice names but get the following error
>
> vinum -> create -f vinum.conf
> 1: drive d1 /dev/ad1s1e
> ** 1 Drive d1, invalid keyword: /dev/ad1s1e: Invalid argument
> 2: drive d2 /dev/ad2s1e
> ** 2 Drive d2, invalid keyword: /dev/ad2s1e: Invalid argument
> 3: drive d3 /dev/ad3s1e
> ** 3 Drive d3, invalid keyword: /dev/ad3s1e: Invalid argument
> 0 drives:
> 1 volumes:
> V export State: down Plexes: 1 Size: 149
GB
>
> 1 plexes:
> P export.p0 R5 State: faulty Subdisks: 3 Size: 149
GB
>
> 3 subdisks:
> S export.p0.s0 State: crashed PO: 0 B Size: 74
GB
> S export.p0.s1 State: crashed PO: 32 kB Size: 74
GB
> S export.p0.s2 State: crashed PO: 64 kB Size: 74
GB
>
> The offending conf file looks like this
>
> drive d2 /dev/ad2s1e
> drive d3 /dev/ad3s1e
> volume export
> plex org raid5 32k
> sd length 76319MB drive d1
> sd length 76319MB drive d2
> sd length 76319MB drive d3
>
> disklabel for the disks in question look like this
>
> tamachi# disklabel -r ad1
> # /dev/ad1c:
> type: ESDI
> disk: ad1s1
> <snip>
> 8 partitions:
> # size offset fstype [fsize bsize bps/cpg]
> c: 156296322 0 unused 0 0 # (Cyl. 0 -
> 9728*)
> e: 156296322 0 4.2BSD 2048 16384 89 # (Cyl. 0 -
> 9728*)a
>
> tamachi# disklabel -r ad2
> # /dev/ad2c:
> type: ESDI
> disk: ad2s1
> <snip>
> 8 partitions:
> # size offset fstype [fsize bsize bps/cpg]
> c: 156296322 0 unused 0 0 # (Cyl. 0 -
> 9728*)
> e: 156296322 0 4.2BSD 2048 16384 89 # (Cyl. 0 -
> 9728*)
>
> tamachi# disklabel -r ad3
> # /dev/ad3c:
> type: ESDI
> disk: ad3s1
> <snip>
> 8 partitions:
> # size offset fstype [fsize bsize bps/cpg]
> c: 156296322 0 unused 0 0 # (Cyl. 0 -
> 9728*)
> e: 156296322 0 4.2BSD 2048 16384 89 # (Cyl. 0 -
> 9728*)
>
> Can someone throw me a life ring here ? The fileserver has been down for a
> day now due to hardware failures on the raid device and I am trying to use
> Vinum to create a raid device with out much luck.
>
> Also, If I decided to do away with a certain configuration I have been
using
> resetconfig , will this allow me to start from scratch again ?
>
> Appreciate any assistance someone can offer on this.
>
> Thanks
>
> LukeK
>
> _______________________________________________
> freebsd-questions at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to
"freebsd-questions-unsubscribe at freebsd.org"
>
More information about the freebsd-questions
mailing list