Boot manager doesn't show the Windows partition

Alexander Farber Alexander.Farber at t-online.de
Fri Aug 1 03:19:48 PDT 2003 

Hi,

I have installed FreeBSD 5.1 on the 1st drive a PC with 3 IDE disks:

ad0: 38166MB <WDC WD400BB-00CLB0> [77545/16/63] at ata0-master UDMA100
ad1: 39083MB <Maxtor 6Y040L0> [79408/16/63] at ata0-slave UDMA133
ad2: 58644MB <IC35L060AVER07-0> [119150/16/63] at ata1-master UDMA100

The other 2 disks contain OpenBSD-current (ad1) and Win XP Home (ad2).
During the FreeBSD installation I've answered "Yes" to the question
if I'd like it to install a boot manager and now during the boot I 
see 2 entries - F1 for FreeBSD and F5 for OpenBSD (both boot fine).

How could I enable the 3rd entry in order to boot the WinXP from
the ad2 disk (second slave) please? I've tried:

newhope:conf {141} sudo boot0cfg -m 0xf ad0
newhope:conf {142} sudo boot0cfg -v -m 0xf ad0
#   flag     start chs   type       end chs       offset         size
1   0x80      0:  1: 1   0xa5   1023:254:63           63     78156162

version=1.0  drive=0x80  mask=0xf  ticks=182
options=nopacket,update,nosetdrv
default_selection=F1 (Slice 1)

But it hasn't helped (still 2 entries). My dmesg is pasted below.

Thank you
Alex

================

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.1-RELEASE #0: Fri Aug  1 00:08:47 GMT 2003
    root at newhope.my.domain:/usr/src/sys/i386/compile/GENERIC.isdn
Preloaded elf kernel "/boot/kernel/kernel" at 0xc04e4000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04e4244.
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 2000085424 Hz
CPU: AMD Athlon(TM) XP 2400+ (2000.09-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x681  Stepping = 1
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory  = 536854528 (511 MB)
avail memory = 516210688 (492 MB)
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS   A7V8X   > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 12 entries at 0xc00f2080
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast"  frequency 3579545 Hz
acpi_timer0: <32-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA Generic host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pci0: <network, ethernet> at device 9.0 (no driver attached)
pci0: <network> at device 11.0 (no driver attached)
pci0: <multimedia, audio> at device 14.0 (no driver attached)
fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0xd000-0xd03f mem 0xec000000-0xec0fffff,0xec800000-0xec800fff irq 7 at device 15.0 on pci0
fxp0: Ethernet address 00:02:b3:1a:eb:57
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
uhci0: <VIA 83C572 USB controller> port 0xb800-0xb81f irq 9 at device 16.0 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xb400-0xb41f irq 9 at device 16.1 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ugen0: WACOM ET-0405-UV1.1-1, rev 1.00/1.11, addr 2
uhci2: <VIA 83C572 USB controller> port 0xb000-0xb01f irq 9 at device 16.2 on pci0
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 16.3 (no driver attached)
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8235 UDMA133 controller> port 0xa800-0xa80f at device 17.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <multimedia, audio> at device 17.5 (no driver attached)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A, console
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
orm0: <Option ROMs> at iomem 0xd0000-0xd0fff,0xc0000-0xcc7ff on isa0
pmtimer0 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
i4btel: 4 ISDN telephony interface device(s) attached
i4bipr: 4 IP over raw HDLC ISDN device(s) attached
i4bctl: ISDN system control port attached
i4bisppp: 4 ISDN SyncPPP device(s) attached
i4b: ISDN call control device attached
i4btrc: 4 ISDN trace device(s) attached
i4brbch: 4 raw B channel access device(s) attached
ad0: 38166MB <WDC WD400BB-00CLB0> [77545/16/63] at ata0-master UDMA100
ad1: 39083MB <Maxtor 6Y040L0> [79408/16/63] at ata0-slave UDMA133
ad2: 58644MB <IC35L060AVER07-0> [119150/16/63] at ata1-master UDMA100
acd0: DVD-ROM <HL-DT-STDVD-ROM GDR8160B> at ata1-slave PIO4
Mounting root from ufs:/dev/ad0s1a
Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped

syncing disks, buffers remaining... 6 6 
done
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.1-RELEASE #1: Fri Aug  1 11:39:59 GMT 2003
    root at newhope.my.domain:/usr/src/sys/i386/compile/GENERIC.isdn
Preloaded elf kernel "/boot/kernel/kernel" at 0xc04e4000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04e4244.
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 2000084964 Hz
CPU: AMD Athlon(TM) XP 2400+ (2000.08-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x681  Stepping = 1
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory  = 536854528 (511 MB)
avail memory = 516210688 (492 MB)
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS   A7V8X   > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 12 entries at 0xc00f2080
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast"  frequency 3579545 Hz
acpi_timer0: <32-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA Generic host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pci0: <network, ethernet> at device 9.0 (no driver attached)
ifpi2-0: <AVM Fritz!Card PCI Version 2> port 0xd800-0xd81f mem 0xed000000-0xed00001f at device 11.0 on pci0
pcib0: slot 11 INTA is routed to irq 5
ifpi2-0: ISACSX PSB3186
ifpi2-0: passive stack unit 0
pci0: <multimedia, audio> at device 14.0 (no driver attached)
fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0xd000-0xd03f mem 0xec000000-0xec0fffff,0xec800000-0xec800fff irq 7 at device 15.0 on pci0
fxp0: Ethernet address 00:02:b3:1a:eb:57
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
uhci0: <VIA 83C572 USB controller> port 0xb800-0xb81f irq 9 at device 16.0 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xb400-0xb41f irq 9 at device 16.1 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ugen0: WACOM ET-0405-UV1.1-1, rev 1.00/1.11, addr 2
uhci2: <VIA 83C572 USB controller> port 0xb000-0xb01f irq 9 at device 16.2 on pci0
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 16.3 (no driver attached)
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8235 UDMA133 controller> port 0xa800-0xa80f at device 17.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <multimedia, audio> at device 17.5 (no driver attached)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A, console
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
orm0: <Option ROMs> at iomem 0xd0000-0xd0fff,0xc0000-0xcc7ff on isa0
pmtimer0 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
i4btel: 4 ISDN telephony interface device(s) attached
i4bipr: 4 IP over raw HDLC ISDN device(s) attached
i4bctl: ISDN system control port attached
i4bisppp: 4 ISDN SyncPPP device(s) attached
i4b: ISDN call control device attached
i4btrc: 4 ISDN trace device(s) attached
i4brbch: 4 raw B channel access device(s) attached
ad0: 38166MB <WDC WD400BB-00CLB0> [77545/16/63] at ata0-master UDMA100
ad1: 39083MB <Maxtor 6Y040L0> [79408/16/63] at ata0-slave UDMA133
ad2: 58644MB <IC35L060AVER07-0> [119150/16/63] at ata1-master UDMA100
acd0: DVD-ROM <HL-DT-STDVD-ROM GDR8160B> at ata1-slave PIO4
Mounting root from ufs:/dev/ad0s1a

More information about the freebsd-questions mailing list