PPPoE : User can't access while root can!

[Benedict Plante]

Hello all! 
           Well, let get straight to the point. I use Bell Canada Sympatico Internet Service Provider, with a DSL connection, and I'm using FreeBSD-4.8-release. 

I've used FreeBSD-4.7 for a while, and sometime, when I installed, ppp wasn't working for user... unless one time, when I completely wipe my FreeBSD-4.7 partition and reinstalling it, it worked. Later, I deinstalled it and reinstalled it completely and it wasn't working. 

Now, I've move to FreeBSD-4.8-release and its still not working! I mean... it does work as root but not as a user. 

If I use internet with a user from the wheel group, it gives me that message: 

$ ping www.google.ca
ping: cannot resolve www.google.ca: Host name lookup failure

In order to make my connection work, I need to configure my /etc/ppp/ppp.conf along with rp-pppoe-3.5. 

-----Here is my /etc/ppp/ppp.conf: 
 
default:
  set log Phase tun command
  set ifaddr 10.0.0.1/0 10.0.0.2/0

sympatico.ca: 
  set device PPPoE:vr0
  set authname *
  set authkey *
  set dial
  set login
  add default HISADDR



-----Here is my /etc/rc.conf:

hostname="FreeBSD"
kern_securelevel_enable="NO"
linux_enable="YES"
moused_enable="YES"
moused_port="/dev/psm0"
moused_type="auto"
nfs_reserved_port_only="YES"
sendmail_enable="YES"
sshd_enable="YES"
usbd_enable="YES"
ppp_enable="YES"
ppp_mode="ddial"
ppp_profile="sympatico.ca"
ppp_nat="YES"                #I tried with it turned to "NO" also
inetd_enable="YES"


-----Here is my /var/log/ppp.log: 

 15:24:53 FreeBSD ppp[53]: tun0: Phase: Received NGM_PPPOE_ACNAME (hook "62031100098933-")
Apr  5 15:24:53 FreeBSD ppp[53]: tun0: Phase: Received NGM_PPPOE_SESSIONID
Apr  5 15:24:53 FreeBSD ppp[53]: tun0: Phase: Received NGM_PPPOE_SUCCESS
Apr  5 15:24:53 FreeBSD ppp[53]: tun0: Phase: deflink: carrier -> login
Apr  5 15:24:53 FreeBSD ppp[53]: tun0: Phase: deflink: login -> lcp
Apr  5 15:24:53 FreeBSD ppp[53]: tun0: Warning: deflink: Reducing configured MRU from 1500 to 1492
Apr  5 15:24:53 FreeBSD ppp[53]: tun0: Phase: bundle: Authenticate
Apr  5 15:24:53 FreeBSD ppp[53]: tun0: Phase: deflink: his = PAP, mine = none
Apr  5 15:24:53 FreeBSD ppp[53]: tun0: Phase: Pap Output: *** ********
Apr  5 15:24:54 FreeBSD ppp[53]: tun0: Phase: Pap Input: SUCCESS ()
Apr  5 15:24:54 FreeBSD ppp[53]: tun0: Phase: deflink: lcp -> open
Apr  5 15:24:54 FreeBSD ppp[53]: tun0: Phase: bundle: Network
Apr  5 15:24:54 FreeBSD ppp[53]: tun0: Phase: deflink: IPV6CP protocol reject closes IPV6CP !
Apr  5 15:25:06 FreeBSD last message repeated 5 times





-----My ifconfig as root (working) 
FreeBSD# ifconfig
vr0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet6 fe80::250:baff:fee5:bdb0%vr0 prefixlen 64 scopeid 0x1
        ether 00:50:ba:e5:bd:b0
        media: Ethernet autoselect (10baseT/UTP)
        status: active
lp0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500
sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 552
faith0: flags=8002<BROADCAST,MULTICAST> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
        inet 127.0.0.1 netmask 0xff000000
ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
tun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1492
        inet 64.228.205.31 --> 64.228.205.1 netmask 0xffffffff
        Opened by PID 53



-----My ifconfig as user (wheel): 

$ ifconfig
vr0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet6 fe80::250:baff:fee5:bdb0%vr0 prefixlen 64 scopeid 0x1
        ether 00:50:ba:e5:bd:b0
        media: Ethernet autoselect (10baseT/UTP)
        status: active
lp0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500
sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 552
faith0: flags=8002<BROADCAST,MULTICAST> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
        inet 127.0.0.1 netmask 0xff000000
ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
tun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1492
        inet 64.228.205.31 --> 64.228.205.1 netmask 0xffffffff
        Opened by PID 53




----- Do you need some more info??? Thank you to all the people who will help me :). 

Erythro73