[ports-i386@FreeBSD.org: py25-rbtree-0.8.0 failed on i386 7]

Sat May 17 18:56:54 UTC 2008

FYI; can you please investigate and/or report to the developers?  If
you are already aware of this problem but do not yet have a fix,
please mark the port BROKEN in the appropriate case, so that users do
not unexpectedly encounter it.

See http://pointyhat.freebsd.org for the full log.

Thanks,
-erwin

----- Forwarded message from User Ports-i386 <ports-i386 at FreeBSD.org> -----

Date: Sat, 17 May 2008 15:53:49 GMT
From: User Ports-i386 <ports-i386 at FreeBSD.org>
To: cvs at oook.cz, erwin at FreeBSD.org
Subject: py25-rbtree-0.8.0 failed on i386 7

You can also find this build log at

  http://pointyhat.freebsd.org/errorlogs/i386-errorlogs/a.7.2008051714/py25-rbtree-0.8.0.log

building py25-rbtree-0.8.0 on gohan24.freebsd.org
in directory /x/tmp/7/chroot/10
building for: 7.0-STABLE i386
maintained by: python at FreeBSD.org
port directory: /usr/ports/devel/py-rbtree
Makefile ident: $FreeBSD: ports/devel/py-rbtree/Makefile,v 1.7 2007/08/01 22:31:39 pav Exp $
build started at Sat May 17 15:51:58 UTC 2008
FETCH_DEPENDS=
PATCH_DEPENDS=
EXTRACT_DEPENDS=
BUILD_DEPENDS=py25-setuptools-0.6c8.tbz pyrex-0.9.7.2.tbz python25-2.5.2_2.tbz
RUN_DEPENDS=py25-setuptools-0.6c8.tbz python25-2.5.2_2.tbz
prefixes: LOCALBASE=usr/local X11BASE=usr/local
add_pkg
================================================================
====================<phase 1: make checksum>====================
=> rbtree-0.8.0.tar.gz doesn't seem to exist in /tmp/distfiles/python.
=> Attempting to fetch from ftp://ftp-master.freebsd.org/pub/FreeBSD/ports/distfiles/python/.
rbtree-0.8.0.tar.gz                                     11 kB 1220 kBps
=> MD5 Checksum OK for python/rbtree-0.8.0.tar.gz.
=> SHA256 Checksum OK for python/rbtree-0.8.0.tar.gz.
================================================================
====================<phase 2: make extract>====================
add_pkg
===>  Extracting for py25-rbtree-0.8.0
=> MD5 Checksum OK for python/rbtree-0.8.0.tar.gz.
=> SHA256 Checksum OK for python/rbtree-0.8.0.tar.gz.
================================================================
====================<phase 3: make patch>====================
add_pkg
===>  Patching for py25-rbtree-0.8.0
===>  Applying FreeBSD patches for py25-rbtree-0.8.0
================================================================
====================<phase 4: make build>====================
add_pkg py25-setuptools-0.6c8.tbz pyrex-0.9.7.2.tbz python25-2.5.2_2.tbz
adding dependencies
pkg_add py25-setuptools-0.6c8.tbz

====
Note that some of the standard modules are provided as separate
ports since they require extra dependencies:

bsddb           databases/py-bsddb
gdbm            databases/py-gdbm
sqlite3		databases/py-sqlite3
tkinter         x11-toolkits/py-tkinter

Install them as needed.
====

pkg_add pyrex-0.9.7.2.tbz
pkg_add python25-2.5.2_2.tbz
skipping python25-2.5.2_2, already added
===>   py25-rbtree-0.8.0 depends on executable: pyrexc - found
===>   py25-rbtree-0.8.0 depends on file: /usr/local/bin/easy_install-2.5 - found
===>   py25-rbtree-0.8.0 depends on file: /usr/local/bin/python2.5 - found
===>  Configuring for py25-rbtree-0.8.0
running config
===>  Building for py25-rbtree-0.8.0
running setopt
Writing setup.cfg
running setopt
Writing setup.cfg
running setopt
Writing setup.cfg
running setopt
Writing setup.cfg
running setopt
Writing setup.cfg
running setopt
Writing setup.cfg
running setopt
Writing setup.cfg
running setopt
Writing setup.cfg
running bdist_egg
running egg_info
writing src/rbtree.egg-info/PKG-INFO
writing top-level names to src/rbtree.egg-info/top_level.txt
writing dependency_links to src/rbtree.egg-info/dependency_links.txt
reading manifest file 'src/rbtree.egg-info/SOURCES.txt'
writing manifest file 'src/rbtree.egg-info/SOURCES.txt'
installing library code to build/bdist.freebsd-7.0-STABLE-i386/egg
running install_lib
running build_ext
pyrexc src/rbtree.pyx --> src/rbtree.c
/work/a/ports/devel/py-rbtree/work/rbtree-0.8.0/src/rbtree.pyx:275:31: Empty declarator
/work/a/ports/devel/py-rbtree/work/rbtree-0.8.0/src/rbtree.pyx:289:37: Empty declarator
building 'rbtree' extension
creating temp.freebsd-7.0-STABLE-i386-2.5
creating temp.freebsd-7.0-STABLE-i386-2.5/src
cc -DNDEBUG -O2 -fno-strict-aliasing -pipe -D__wchar_t=wchar_t -DTHREAD_STACK_SIZE=0x20000 -O2 -fno-strict-aliasing -pipe -fPIC -I./src -I/usr/local/include/python2.5 -c src/rbtree_impl.c -o temp.freebsd-7.0-STABLE-i386-2.5/src/rbtree_impl.o
cc -DNDEBUG -O2 -fno-strict-aliasing -pipe -D__wchar_t=wchar_t -DTHREAD_STACK_SIZE=0x20000 -O2 -fno-strict-aliasing -pipe -fPIC -I./src -I/usr/local/include/python2.5 -c src/rbtree.c -o temp.freebsd-7.0-STABLE-i386-2.5/src/rbtree.o
cc: src/rbtree.c: No such file or directory
cc: No input files specified
error: command 'cc' failed with exit status 1
*** Error code 1

Stop in /a/ports/devel/py-rbtree.
================================================================
build of /usr/ports/devel/py-rbtree ended at Sat May 17 15:54:01 UTC 2008

----- End forwarded message -----
-- 
I'm Erwin Lansing                              erwin at FreeBSD.org
and I approve this message                        erwin at aauug.dk
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 187 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-python/attachments/20080517/c5a3b816/attachment.pgp